
92
Capacitance Rated Voltage DC to 85°C / 0.66 Vr to 125°C
μF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C)
330 337 V (3)
470 477 V (3)
560 567 V (3)
680 687
1000 108
CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE
(LETTER DENOTES CASE SIZE)
ESR VS FREQUENCY PLOTS – TYPICAL
Available Ratings, (ESR ratings in mOhms in brackets)
Engineering samples - please contact manufacturer
*Codes under development - subject to change
Note: Voltage ratings are minimum values. AVX reserves the right to supply
higher ratings in the same case size, to the same reliability standards.
CoreCap®NPV Series
NbO - Ceramic Multianode Chip Capacitors
ESR
1
10
100
1000
100 1000 10000 100000 1000000
Frequency (Hz)
ESR (mOhms)
Impedance
1
10
100
1000
10000
100 1000 10000 100000 1000000
Frequency (Hz)
ESR (mOhms)
LEAD-FREE COMPATIBLE
COMPONENT
NON-BURN
NON-SMOKE
RATINGS & PART NUMBER REFERENCE
Rated DCL DF ESR 100kHz RMS Current (mA) 100kHz RMS Voltage (mV)
AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL
Part No. Size (μF) (V) Max. Max. @300kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
2.5 Volt @ 85ºC (1.7 Volt @ 105ºC)
NPVV567M002#0003 V 560 2.5 28 6 3 3 4619 4157 1848 14 12 6
4 Volt @ 85°C (2.7 Volt @ 105°C)
NPVV337M004#0003 V 330 4 26.4 6 3 3 4619 4157 1848 14 12 6
NPVV477M004#0003 V 470 4 37.6 6 3 3 4619 4157 1848 14 12 6
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
The EIA & CECC standards for low ESR solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting.
For typical weight and composition see page 123.
NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.