UTS Hi seal
Description
Dynamic IP68/IP69K - Waterproof connec-
tors in mated and unmated condition
■ UTS Hi seal connector is a range of light-
weight industrial plastic circular connec-
tors compatible with MIL-DTL-26482
connectors. It offers Dynamic IP68/IP69K
water protection in both mated & unma-
ted conditions.
■ Available :
▪ in 5 shell sizes,
▪ up to 21 contact arrangements
▪ with multiple polarization options.
■ Connectors are standard supplied with
preassembled handsolder contacts. For
dispsolder or crimp contacts, please
consult factory.
Applications
UTS Hi seal connector is suitable for a broad
range of applications, such as
• Wet & submerged environments
• Instrumentation
• Meteorological measurement system
• Traffic control
• Videosurveillance
• Tunnel fans
• Water measurement
and there is more.
Benefits
Protection of electronics inside the
equipments/boxes in case of maintenance,
unmated conditions or cable damage
Intermateable and interchangeable with
existing solutions
• Design based on MIL-DTL-26482
connectors or equivalents such as : BS 9522
F0017, NFC93422, HE301B, VG 95328.
Ideal for indoor / outdoor applications
• Dynamic IP68/69K water protection
(during vibration and cable mouvements)
• Corrosion resistance
Operational safety - ESD
• Plastic shells
Rapid and secure locking system
• Bayonet connector
Suitable for overmoulding
• Sealed insulator and contacts
Respect for environment
• RoHS compliant
Visual identification
• Coloured rings
UTS Hi seal
2
Technical characteristics
Environmental
• Operating temperature -40°C to + 105°C
• Sealing (mated/unmated) Dynamic IP68 - under water for 1
week, 1 bar
Dynamic IP69K per DIN 40050
• Salt spray 500 hours
• UV resistance
No mechanical degradation or important variation of color
after 5 years of exposure in natural environment (equivalence
exposure to sun and moisture as per ISO4892)
• RoHS compliant & conform to the Chinese standard SJ/T1166-
2006 (Chinese RoHS equivalent)
Material
• Housing + Backshell Thermoplastic UL94-V0
Mechanical
• Durability 250 matings & unmatings
• Vibration resistance Sinusoidal vibrations per
CEI 60512-4 - from 10 to 2000 Hz
• Thermal shock 5 cycles 30 min. from -40°C to 105°C
per MIL-STD1344 method 1003
Electrical
• Current per contact max. Size 16: 13A
Size 20: 7.5A
• Insulation resistance ≥ 5000 MΩ under 500Vcc at 25°C
• Test potential 1500 Veff between contacts size 20
2300 Veff between contacts size 16
• Working voltage 600 V - contacts size 20
1000 V - contacts size 16
according to MIL-DTL-26482
Contact arrangements
Size 8
2
Contacts :
2 Ø 1 (#20)
3
Contacts :
3 Ø 1 (#20)
3A/98
Contacts :
3 Ø 1 (#20)
4
Contacts :
4 Ø 1 (#20)
33
Contacts :
3 Ø 1 (#20)
Size 10
6
Contacts :
6 Ø 1 (#20)
7
Contacts :
7 Ø 1 (#20)
98
Contacts :
6 Ø 1 (#20)
3
Contacts :
3 Ø 1.6 (#16)
8
Contacts :
8 Ø 1 (#20)
10
Contacts :
10 Ø 1 (#20)
14
Contacts :
14 Ø 1 (#20)
2
Contacts :
2 Ø 1.6 (#16)
12
Contacts :
8 Ø 1 (#20)
4 Ø 1.6 (#16)
15
Contacts :
14 Ø 1 (#20)
1 Ø 1.6 (#16)
18
Contacts :
18 Ø 1 (#20)
19
Contacts :
19 Ø 1 (#20)
5
Contacts :
5 Ø 1.6 (#16)
Size 18*
11
Contacts :
11 Ø 1.6 (#16)
32
Contacts :
32 Ø 1 (#20)
30
Contacts :
29 Ø 1 (#20)
1 Ø 1.6 (#16)
Size 12
Size 14
* Please consult factory
UTS Hi seal
3
Note : all dimensions are in mm
Connector family UTS
UTS
7
6
-
JC
8
8
E
E
2
2
P
S
-
-
Body variation
6 Cable plug + backshell
7 Jam nut receptacle
0
Square flange receptacle
Backshell : JC = Backshell (only for plug) / No digit = No backsell (only for receptacle)
Shell size :
8, 10, 12, 14, 18
Contact type
E = Handsolder contacts / R = Crimp contacts* / D = PC tail contacts*
Insert arrangement - see previous page
Contact gender : P = Pin contacts / S = Socket contacts
Insert rotation : No digit = Normal / W, X, Y, Z = Different orientations - see below
Ordering information
* Please consult factory
Insert orientation - Insert rotated in body (viewed from front face of male insert)
Normal WXY Z
* 8-98 layout, W and X non standard ortientations / 10-7 & 12-14 layouts, X non standard orientation
Shell size 8 10 12 14 18
Layouts 2 3 3A(98)* 4 33 6 7* 98 3 8 10 2 14* 5 12 15 18 19 11 32 30
Angle in
degrees
W 58 60 60 45 90 90 90 90 - 90 60 - 45 40 43 17 15 30 62 5 180
X 122 210 210 - - - - 180 - 112 155 - 92 90 110 90 165 119 138 193
Y - - - - - - - 240 180 203 270 - 184 - 155 180 315 241 222 285
Z - - - - - - - 270 - 292 295 - 273 - 234 270 - 340 265 350
Range presentation
Square flange receptacle with handsolder contacts
Shell
size
Part numbers
A B±0.15 C Ø D±0.15 E±0.25 F±0.25 G±0.1 Ø I±0.10 Ø J±0.10
Male contact Female contact
8 UTS08E - - P - UTS08E - - S - 21.5 2.3 11.7 12.0 15.1 21.0 3.2 15.5 12.5
10 UTS010E - - P - UTS010E - - S - 21.5 2.3 11.7 15.0 18.3 23.8 3.2 17.3 15.1
12 UTS012E - - P - UTS012E - - S - 21.5 2.3 11.7 19.0 20.6 26.2 3.2 21.8 18.2
14 UTS014E - - P - UTS014E - - S - 21.5 2.3 11.7 22.2 23.0 28.6 3.2 25.0 21.5
18 UTS018E - - P -* UTS018E - - S -* 21.5 2.5 11.7 28.5 27.0 33.3 3.2 31.8 27.8
ØD±0.15
C max.
Shell
E±0.25
E±0.25
J
I
ØG±0.1
B
A max.
F±0.25
E±0.25
E±0.25
F±0.25
4 holes ØG±0.1
PANEL CUT OUT
Thread
UTS Hi seal
4
Note : all dimensions are in mm / * Please consult factory
Jam nut receptacle with handsolder contacts
Shell size
Part numbers
Ø A B C D E F Ø G Tightening
torque
Male contact Female contact
8 UTS78E - - P - UTS78E - - S - 12.0 19.3 3.2 24.0 19.3 13.75 14.6 2 Nm
10 UTS710E - - P - UTS710E - - S - 14.9 19.3 3.2 27.0 22.2 16.5 17.7 3 Nm
12 UTS712E - - P - UTS712E - - S - 19.0 19.3 3.2 31.8 27.0 21.2 22.5 4 Nm
14 UTS714E - - P - UTS714E - - S - 22.2 19.3 3.2 34.9 30.2 24.3 25.7 5 Nm
18 UTS718E - - P -* UTS718E - - S -* 28.5 19.3 3.2 41.3 36.6 30.6 32.0 5 Nm
Insert Nut
(see tightening torque)
Shell
C max.
Panel thickness
B max.
Thread
O’Ring
A±0.15
E±0.3
D±0.25
G±0.20
F±0.20
PANEL CUT OUT
Cable plug with handsolder contacts
Shell size
Part numbers
Ø A B Ø Cable range
Standard seal
Ø Cable range
Reducing seal Hexagon D C
Male contact Female contact
8 UTS6 - - 8E - - P - UTS6 - - 8E - - S - 22.5 54.0 2.5 / 6.5 1.5 / 5.0 16.0 21.3
10 UTS6 - - 10E - - P - UTS6 - - 10E - - S - 26.7 63.2 2.5 / 8.0 1.5 / 5.0 18.5 23.6
12 UTS6 - - 12E - - P - UTS6 - - 12E - - S - 30.2 66.7 5.0 / 12.0 3.0 / 9.0 24.0 23.6
14 UTS6 - - 14E - - P - UTS6 - - 14E - - S - 35.1 71.5 7.0 / 14.0 5.0 / 12.0 26.0 23.6
18 UTS6 - - 18E - - P -* UTS6 - - 18E - - S -* 42.0 81.3 9.0/ 18.0 7.0 / 16.0 33.0 -
Ø A max.
Coupling nut
Backshell body
Ø Cable range
Hexagon D
Backshell
Plug
Insert
B min.
Backshell
nut
Coloured ring supplied as optional extra / * Please consult factory
INDUTSHSFL03EN © Copyright SOURIAU - All information in this publication presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement.
For further information, visit our website www.souriau-industrial.com
or contact us at contactindustry@souriau.com
Ø A max.
C max.
Cable plug without backshell
Accessories: please refer to the UTS catalogue
