Panasonic Corporation 2019
c ACCTB69E 201906
FEATURES
1. Plug is equipped with electrical / optical conversion
function.
2. Noise reduction of high speed signal and electrical
isolation easily achieved.
3. High speed and wide data rate transmission possible
4. Lineup includes 1 channel-Bi-direction and 2
channel-Uni-direction
1 channel-Bi-direction: 20 Mbps to Max. 8 Gbps
2 channel-Uni-direction: 20 Mbps to Max. 16 Gbps
(20 Mbps to 8 Gbps/ch)
Easy high speed optical transfer inside devices
V Series 1 channel-Bi-direction/2 channel-Uni-direction
Active Optical Connector
APPLICATIONS
1. Measuring equipment, Image processing instrument,
Industrial robots, Printer, Medical equipment, etc.
and other high speed transmission, noise reduction
and electrical isolation applications
DETAILED FEATURES
Plug is equipped with electrical/optical conversion function.
Optical fiber (Quartz, dual core)
Receptacle
Plug
(E/O conversion)
●1channel-Bi-direction:Max.8Gbpstransmission
Beingabletoreversethedualcoreopticalbertransfer
directionmakesitidealforsuchapplicationsasmutualhigh
speedtransferbetweenconnectedPCboards.
●
2channel-Uni-direction:Max.16Gbpstransmission(8Gbps/ch)
Beingabletousethedualcoreopticalberunidirectionally
makesitidealforhighcapacity(max.16Gbps)transfer
applications.
The differential input signal is converted to an optical signal by the Laser Diode Driver (LDD) and Laser
Diode (LD) in the plug.
The optical signal is transmitted through the optical ber and reproduced as di󰀨erential output signal by the
Photo Diode (PD) and Trans Impedance Amplier (TIA).
TIA
(Trans impedance amplifier)
LDD
Laser diode driver
Differential
output signal
Differential
input signal
Optical fiber
Differential
input signal
Differential
output signal
LDD
Laser diode driver
LDD
Laser diode driver
PD
Photo diode
LD
Laser diode
LD
Laser diode
LD
Laser diode
Differential
input signal
Differential
input signal
Optical fiber
Differential
output signal
Differential
output signal
PD
Photo diode
LD
Laser diode
PD
Photo diode
PD
Photo diode
TIA
(Trans impedance amplifier)
LDD
Laser diode driver
TIA
(Trans impedance amplifier)
TIA
(Trans impedance amplifier)
1 channel
Bi-direction
2 channels
Uni-direction
industrial.panasonic.com/ac/e/
Automation Controls Catalog
2019.07
ー 1 ー
Active Optical Connector V Series (1 channel-Bi-direction/2 channel-Uni-direction)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/ Panasonic Corporation 2019
c ACCTB69E 201906
PRODUCT TYPES (1 channel-Bi-direction)
Integrated cable and plug
Transmissionrate Transmissionspecications Cablelength PartNo. Packingquantity
20
Mbpsto
6
Gbps/ch
1
channel-Bi-direction
50
mm AYG
4
V10585M
1
10
pcs.
500
mm AYG
4
V15085M
1
1000
mm AYG
4
V
1
A
085
M
1
50
mm AYG
4
V10585M
3
100
pcs.
500
mm AYG
4
V15085M
3
1000
mm AYG
4
V
1
A
085
M
3
Receptacle (both 1 channel-Bi-direction and 2 channel-Uni-direction)
Producttype PartNo. Packingquantity
Receptacle
AXK
6
S20447M
120
pcs.
AXK
6
S20447M
3 200
pcs.(reel)
SPECIFICATIONS (1 channel-Bi-direction)
Rated specications (per channel)
Item Min. Typical Max. Unit Condition
Supplyvoltage
3
.
2 3
.
3 3
.
4
V —
Powerconsumption — —
230
mW Bi-direction,
1
channel
Transmissionrate(perchannel)
0
.
02
—
8
Gbps
8
b/
10
bcoding
Input/outputcharacteristicimpedance
80 100
125
Ω—
Di󰀨erentialinputvoltage
400
—
1600
mVpp peak-to-peak
Inputcommonmodevoltage
150
—
340
mV *
1
Inputtotaljitter — —
0
.
24
UI *
2
Inputrise-time — —
0
.
30
UI
20
to
80
%*
2
,*
3
Inputfall-time — —
0
.
30
UI
20
to
80
%*
2
,*
3
Di󰀨erentialoutputvoltage
300 440 550
mVpp peak-to-peak*
2
Outputcommonmodevoltage
150 250 275
mV *
2
Outputrise-time — —
0
.
50
UI
20
to
80
%*
2
Outputfall-time — —
0
.
50
UI
20
to
80
%*
2
Outputtotaljitter — —
0
.
60
UI Dj+Rjpp*
2
*1:WhenperformingACcoupling,theinputcommonmodevoltageis0to1.8V.
*2:InputdatapatternisPRBS27-1.RjppisequivalenttoBER10-12.
*3:Whenthetransmissionrateisunder1.5Gbps,thetimeisupto200ps.
Use conditions
Item Performance Remarks
Operatingambienttemperature
0
to+
70
°C Noicingorcondensation.
Storagetemperature -
20
to+
50
°C(packagedform)
-
20
to+
85
°C(productonly) Noicingorcondensation.
Electricalstaticdischarge ±
2
kV
Applied
3
timesontheexternalshell
C=
100
pF,R=
1
.
5
kΩ
C=
150
pF,R=
330
Ω
Immunity ConformedtoIEC61000-
6
-
2
standard —
Electromagneticinterference ConformedtoVCCIclassBstandard —
Compositeinsertionforce Max.
15
.
7
N(initial) —
Compositeremovalforce Min.
1
.
17
N —
Insertionandremovallife
50
times Repeatedinsertionandremovalcyclesof
Max.
200
times/hour
LaserClass
LeserClass
1
Emissionpeakwavelength:
850
nm
Max.output:
2
.
2
mW
IEC60825-
1
Ed.
2
:
2007
IEC60825-
1
Ed.
3
:
2014
ー 2 ー
Active Optical Connector V Series (1 channel-Bi-direction/2 channel-Uni-direction)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/ Panasonic Corporation 2019
c ACCTB69E 201906
Materials specications
Componentname Materials SpecicationsandRemarks
Shell Copperalloy Nickelplating
Bushing Elastomer Black
Opticalber Silica,UV-curedresin Crosssection:
0
.
4
×
0
.
6
mm,
2
cores
Connector LCPresin,copperalloy Terminal(Au-platingonNi-base)
PhotoelectricconversionPCboard Glass-beredepoxy,epoxyresin,etc. —
IC CMOS —
Laserdiode GaAs —
Photodiode GaAs —
Terminallayoutdiagram
(TOPVIEW,receptacleastransparent)
TERMINAL LAYOUT 1 channel-Bi-direction
11 12 13 14 15 16 17 18 19 20
Receptacle terminal No.
1 2 3 4 5 6 7 8 9 10
Optical fiber side
Receptacle
No. Name
1
Monitor
2
GND
3
Di󰀨erentialoutput−
4
Di󰀨erentialoutput+
5
GND
6
Open
7
Open
8
PowerSupply
9
PowerSupply
10
GND
11
Open
12
GND
13
Di󰀨erentialinput−
14
Di󰀨erentialinput+
15
GND
16
GND
17
PowerSupply
18
PowerSupply
19
PowerSupply
20
GND
ー 3 ー
Active Optical Connector V Series (1 channel-Bi-direction/2 channel-Uni-direction)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/ Panasonic Corporation 2019
c ACCTB69E 201906
PRODUCT TYPES (2 channel-Uni-direction)
Integrated cable and plug
Transmissionrate Transmissionspecications Cablelength PartNo. Packingquantity
20
Mbpsto
8
Gbps/ch
2
channel-Uni-direction
50
mm AYG
5
V10585M
1
10
pcs.
500
mm AYG
5
V15085M
1
1000
mm AYG
5
V
1
A
085
M
1
50
mm AYG
5
V10585M
3
100
pcs.
500
mm AYG
5
V15085M
3
1000
mm AYG
5
V
1
A
085
M
3
Receptacle (both 1 channel-Bi-direction and 2 channel-Uni-direction)
Producttype PartNo. Packingquantity
Receptacle
AXK
6
S20447M
120
pcs.
AXK
6
S20447M
3 200
pcs.(reel)
SPECIFICATIONS (2 channel-Uni-direction)
Rated specications (per channel)
Item Min. Typical Max. Unit Condition
Supplyvoltage
3
.
2 3
.
3 3
.
4
V —
Powerconsumption — —
230
mW Uni-direction,
2
channels
Transmissionrate(perchannel)
0
.
02
—
8
Gbps
8
b/
10
bcoding
Input/outputcharacteristicimpedance
80 100
125
Ω—
Di󰀨erentialinputvoltage
400
—
1600
mVpp peak-to-peak
Inputcommonmodevoltage
150
—
340
mV *
1
Inputtotaljitter — —
0
.
24
UI *
2
Inputrise-time — —
0
.
30
UI
20
to
80
%*
2
,*
3
Inputfall-time — —
0
.
30
UI
20
to
80
%*
2
,*
3
Di󰀨erentialoutputvoltage
300 440 550
mVpp peak-to-peak*
2
Outputcommonmodevoltage
150 250 275
mV *
2
Outputrise-time — —
0
.
50
UI
20
to
80
%*
2
Outputfall-time — —
0
.
50
UI
20
to
80
%*
2
Outputtotaljitter — —
0
.
60
UI Dj+Rjpp*
2
*1:WhenperformingACcoupling,theinputcommonmodevoltageis0to1.8V.
*2:InputdatapatternisPRBS27-1.RjppisequivalenttoBER10-12.
*3:Whenthetransmissionrateisunder1.5Gbps,thetimeisupto200ps.
Use conditions
Item Performance Remarks
Operatingambienttemperature
0
to+
70
°C Noicingorcondensation.
Storagetemperature -
20
to+
50
°C(packagedform)
-
20
to+
85
°C(productonly) Noicingorcondensation.
Electricalstaticdischarge ±
2
kV
Applied
3
timesontheexternalshell
C=
100
pF,R=
1
.
5
kΩ
C=
150
pF,R=
330
Ω
Immunity ConformedtoIEC61000-
6
-
2
standard —
Electromagneticinterference ConformedtoVCCIclassBstandard —
Compositeinsertionforce Max.
15
.
7
N(initial) —
Compositeremovalforce Min.
1
.
17
N —
Insertionandremovallife
50
times Repeatedinsertionandremovalcyclesof
Max.
200
times/hour
LaserClass
LeserClass
1
Emissionpeakwavelength:
850
nm
Max.output:
2
.
2
mW
IEC60825-
1
Ed.
2
:
2007
IEC60825-
1
Ed.
3
:
2014
ー 4 ー
Active Optical Connector V Series (1 channel-Bi-direction/2 channel-Uni-direction)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/ Panasonic Corporation 2019
c ACCTB69E 201906
Materials specications
Componentname Materials SpecicationsandRemarks
Shell Copperalloy Nickelplating
Bushing Elastomer Black
Opticalber Silica,UV-curedresin Crosssection:
0
.
4
×
0
.
6
mm,
2
cores
Connector LCPresin,copperalloy Terminal(Au-platingonNi-base)
PhotoelectricconversionPCboard Glass-beredepoxy,epoxyresin,etc. —
IC CMOS —
Laserdiode GaAs —
Photodiode GaAs —
TERMINAL LAYOUT 2 channel-Uni-direction
Transmitter side
Terminallayoutdiagram
(TOPVIEW,receptacleastransparent)
11 12 13 14 15 16 17 18 19 20
Receptacle terminal No.
1 2 3 4 5 6 7 8 9 10
Optical fiber side
Receptacle
Terminallayoutdiagram
(TOPVIEW,receptacleastransparent)
Receiver side
11 12 13 14 15 16 17 18 19 20
Receptacle terminal No.
1 2 3 4 5 6 7 8 9 10
Optical fiber side
Receptacle
No. Name
1
Open
2
GND
3
ch
1
Di󰀨erentialinput+
4
ch
1
Di󰀨erentialinput−
5
GND
6
Open
7
PowerSupply
8
PowerSupply
9
Open
10
GND
11
Open
12
GND
13
ch
2
Di󰀨erentialinput−
14
ch
2
Di󰀨erentialinput+
15
GND
16
Open
17
PowerSupply
18
PowerSupply
19
Open
20
GND
No. Name
1
Open
2
GND
3
ch
2
Di󰀨erentialoutput−
4
ch
2
Di󰀨erentialoutput+
5
GND
6
Monitor(ch
2
)
7
Open
8
Open
9
PowerSupply
10
GND
11
Open
12
GND
13
ch
1
Di󰀨erentialoutput+
14
ch
1
Di󰀨erentialoutput−
15
GND
16
Monitor(ch
1
)
17
Open
18
Open
19
PowerSupply
20
GND
ー 5 ー
Active Optical Connector V Series (1 channel-Bi-direction/2 channel-Uni-direction)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/ Panasonic Corporation 2019
c ACCTB69E 201906
DIMENSIONS (both 1 channel-Bi-direction and 2 channel-Uni-direction) Unit:mm
Integrated cable and plug
12.7
9.1
L
0.60
（3.9）
0.40
6.1
General tolerance: ±0.3
Label NOTES: 1 channel-Bi-direction : The label is attached to only one plug.
2 channel-Uni-direction: The labels are attached to a plug on both side
1channel-Bi-direction
L:Cablelength(mm) Tolerance(mm)
50
+
10
−
0
500
+
50
−
0
1000
+
100
−
0
2channel-Uni-direction
L:Cablelength(mm) Tolerance(mm)
50
+
10
−
0
500
+
50
−
0
1000
+
100
−
0
Receptacle
8.20
4.50±0.1
*
3.30
1.72
0.95
（1.10）（1.10）2.80
5.00
4.20
0.50±0.050.50±0.05
0.20±0.03
C 0.90
General tolerance: ±0.2
0.10
0.20±0.03
* The terminal close to the portion to be soldered have nickel barriers (except nickel portions).
Lot No. marking
(Suction face)
Plug and receptacle are mated
9.1
6.0
6.5
Center of receptacle
Label
ー 6 ー
Active Optical Connector V Series (1 channel-Bi-direction/2 channel-Uni-direction)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/ Panasonic Corporation 2019
c ACCTB69E 201906
Mounting layout (Component prohibited area)
Theshadedareacannotbeusedfortheplacementofother
componentssinceitisusedbytheactiveopticalconnector.The
PCboardintheshadedareashouldbecoveredwithsolder
resistexceptforthereceptacle’smountingpad.
Receptacle: Embossed tape packaging
EMBOSSED TAPE DIMENSIONS Unit:mm
Specications for taping
InaccordancewithJISC0806:1990.However,notappliedto
themounting-holepitchofsomeconnectors.
Specications for the plastic reel
InaccordancewithEIAJET-7200B.
25.4±1
380 dia.
Embossed carrier tape
Taping reel
Top cover tape
Label
Embossed mounting-hole
（24.0±0.3）
（11.5）
（2.0） （4.0）
（12.0）
（1.75）
1.5 dia.
+
0.1
0
Leading direction after packaging
Receptacle orientation with respect to embossed tape feeding direction
Type
Direction
oftapeprogress
Receptacle
NOTES Unit:mm
6.3
13.4 3.9
8.2
5.0
9.7
ー 7 ー
Active Optical Connector V Series (1 channel-Bi-direction/2 channel-Uni-direction)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/ Panasonic Corporation 2019
c ACCTB69E 201906
Design of PC board patterns
Conducttherecommendedfootpatterndesign,inorderto
preservethemechanicalstrengthofterminalsolderareas.
Recommended PC board and metal mask patterns
Connectorsaremountedwithhighpitchdensity,intervalsof0.35
mm,0.4mmor0.5mm.Inordertoreducesolderanduxrise,
solderbridgesandotherissuesmakesuretheproperlevelsof
solderisused.
Theguresarerecommendedpatterns.Pleaseusethemasa
reference.
Recommended PC board pattern
(TOPVIEW)
0.75±0.05
0.125±0.05
(2.00) ( 2.00)
2.00±0.052.00±0.05
6.00±0.05
0.50±0.050.50±0.05
0.25±0.05
Recommended metal mask pattern
Metalmaskthickness:When150μm
(Openingarearatio:69%)
Recommended metal mask pattern
Metalmaskthickness:When120μm
(Openingarearatio:87%)
0.115±0.01
0.35±0.01
(1.50)
3.00±0.013.00±0.01
(1.50)
6.00±0.01
0.50±0.010.50±0.01
0.23±0.01
2.20±0.012.20±0.01
0.115±0.01
0.35±0.01
0.23±0.01
0.50±0.010.50±0.01
(1.90)( 1.90)
6.00±0.01
ー 8 ー
Active Optical Connector V Series (1 channel-Bi-direction/2 channel-Uni-direction)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/ Panasonic Corporation 2019
c ACCTB69E 201906
About safety remarks
Observethefollowingsafetyremarkstopreventaccidentsandinjuries.
•Donotusetheseconnectorsbeyondthespecicationsheets.The
usageoutsideofspeciedratedcurrent,dielectricstrength,and
environmentalconditionsandsoonmaycausecircuitrydamagevia
abnormalheating,smoke,andre,oreyeorskininjuriesbylaser
beam.
•Inordertoavoidaccidents,yourthoroughspecicationreviewis
appreciated.Pleasecontactoursaleso󰀩ceifyourusageisoutof
thespecications.Otherwise,PanasonicCorporationcannot
guaranteethequalityandreliability.
•Wearedoingourbesttoconstantlyimprovethequalityandreliability
ofourproducts.However,someelectricitems/componentsdoinfact
faildespiteoure󰀨orts.Thedurabilityofproductsalsovaries
dependingonserviceenvironmentsandconditions.Pleasecheck
yourproductunderactualserviceconditionsbeforeuse.Ifyou
continuetouseaproductinapoorcondition,itemswithdeteriorated
insulationperformancemaygenerateabnormalheatorsmokeor
evenignite.Theproduct'sfailureorendofservicelifemaycause
accidentsinvolvingriskstohumanhealth,re,ordangertothepublic
atlarge.Weadviseyoutoapplysafetymeasuresandregular
maintenancework,suchastheuseofredundantdesign,reproong,
andmalfunction-preventingdesign,toruleoutsuchaccidents.
•Cautionatthetimeofabreakageofopticalber
Whentheopticalberbreaks,immediatelyshuto󰀨thepower.
Thisproductusesalaserdiode(class1)ofnon-visiblelightwith
oscillationwavelength850nm.Donotlookintothetipofanoptical
ber.Thelaserbeamdoesnotirradiateoutsideinnormaloperation,
butabreakageoftheopticalbermaycauseirradiationoutside.
Whentheopticalberbreaks,beverycarefulnottoinjuryattheber
tip.
Cautions when using the product
Cautions about the operating and storage environments
Pleaseusetheproductinaccordancewiththeconditionsdescribedin
thesespecications.
Theproductqualitycannotbewarrantediftheproductfailsbecauseit
isusedoutsidetheconditionsinthesespecications.
•Productfailureduetocondensationcannotbewarranted.
•Usecautionforavoidingdust.
•Thefollowingenvironmentmaydeterioratetheproduct'sappearance
anda󰀨ecttheproductcharacteristics,andshouldthusbeavoided.
•Anenvironmentinwhichthepossibleadherenceofchemicalssuch
asacidandalkaliexists.
•Inagaseousatmosphereofsalt,sulde,etc.
•Thisproducthasastructurerequiringaninsertionforceformating,
butthematingmaycomeo󰀨whenanexternalforceisappliedtothe
plug,impactisappliedbydropping,orvibrationisappliedin
equipment.Su󰀩cientcautionshouldbeusedwiththeequipmentto
avoidsuchincidents.
•Theproductcannotbeusedinamovablepartswhiletheopticalber
isbent.Suchusemaycausedeformationofthereceptacleor
breakageoftheopticalber.
•Inordertoavoidaloadontheplugandreceptacleappliedbythe
tensileforceoftheopticalber,aredundantdesignisrequiredwith
respecttotheopticalberlength.
•Usecautionforwiringtheopticalbertoavoidgettingentangledor
twisting.Also,useadhesivetapeforsecuringtheopticalberfor
preventingexcessivestresscausedbyvibrationandimpact.
•Insertionandremovaloperationsmustbeperformedwhilethepower
iso󰀨.
Insertionorremovaloperationsinalivecondition(withcurrentand
voltage)mayleadtoabreakage.
•Usecautionwithregardtothegenerationandhandlingofstatic
electricityintheoperatingenvironmenttoprotecttheplug.
•Securesu󰀩cientinsulationdistancebetweentheexternalmetal
enclosureoftheplugandtheperipheralcomponents.Theplug
enclosure,whichisconnectedtotheground,maygiverisetodanger
fromashort-circuit.
Whentheproductisusedinadi󰀨erentenvironmentandin
accordancewithamethodotherthandescribedinthisdocument,
pleasecontactoursaleso󰀩ce.
•Donotdisassemblethisproduct.Doingsowillcausemalfunction.
Also,donotremovethelabel.Theproductcontrolnumberisthere.
Bushing
Ex)
Optical fiber
Securing with tape
Plug
Direction of mating and insertion
1 channel-Bi-direction
Matingoftheplugandreceptaclerequiresorientation.Alignthe
receptacleshapeinthedirectionoftheopticalberofplug.
2-channel-Uni-direction
Theplugsoneachendoftheopticalbercablearedi󰀨erent
(transmissionsideandreceivingside).
Thecablewillnotworkifinsertedincorrectly;therefore,pleaseverify
theendspriortoinstallation.
Thereceivingendplughasanarrowprintedonitforthepurposeof
verication.
Pleaseimplementameasuretoavoidincorrectinsertionsuchasby
printingasimilarmarkonthePCboard. Receiving side module Silk screen printing, etc.
Exampleofavoidincorrectinsertion
Notes on Using Active Optical Connector V Series
ー 9 ー
Active Optical Connector V Series (1 channel-Bi-direction/2 channel-Uni-direction)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/ Panasonic Corporation 2019
c ACCTB69E 201906
Insertion
Becausethisproducthasbeendesignedwithathinmatingstructure
betweentheplugandreceptacleforcompact-sizingpurposes,
excessivetiltingduringinsertionorremovalleadstoproductfracture
andseparationofthesoldersectionofterminals.
Foravoidingbreakageofthematingparts,conrmthealignment
beforemating.
Mating of plug
Makesuretheplugissecurelyinsertedintothereceptacle.
Aftermating,agapremainsbetweenthePCboardandplug.
Avoidapplyingexcessivepressure. ⇩Insertion
Plug removal
Fortheremovaloperation,holdbothsidesofthemetalenclosureand
lifttheplugupward.
Donotpulltheopticalberandbushing.
⇩
⇩
Enclosure
metal side
Enclosure
metal side
Receptacle
Regarding soldering
Reow soldering
•Measuretherecommendedproletemperatureforreowsoldering
byplacingasensoronthePCboardneartheconnectorsurfaceor
terminals.(Pleaserefertothespecicationfordetailbecausethe
temperaturesettingdi󰀨ersbyproducts.)
•Asforcreamsolderprinting,screenprintingisrecommended.
•WhensettingthescreenopeningareaandPCboardfootpattern
area,refertherecommendedPCboardpatternandwindowsizeof
metalmaskonthespecicationsheet,andmakesurethatthesizeof
boardpatternandmetalmaskatthebaseoftheterminalsarenot
increased.
•Pleasepayattentionsnottoprovidetoomuchsolder.Itmakesmiss
matingbecauseofinterferenceatsolderingportionwhenmating.
Terminal
Paste solder
PC board foot pattern
•WhenmountingonbothsidesofthePCboardandtheconnectoris
mountingontheunderside,useadhesivesorothermeanstoensure
theconnectorisproperlyxedtothePCboard.
(Doublereowsolderingonthesamesideispossible.)
•Theconditionofsolderoruxriseandwettabilityvariesdepending
onthetypeofsolderandux.Solderanduxcharacteristicsshould
betakenintoconsiderationandalsosetthereowtemperatureand
oxygenlevel.
•Donotuseresin-containingsolder.Otherwise,thecontactsmightbe
rmlyxed.
•Solderingconditions
Pleaseusethereowtemperatureproleconditionsrecommended
belowforreowsoldering.Pleasecontactoursaleso󰀩cebefore
usingatemperatureproleotherthanthatdescribedbelow(e.g.
lead-freesolder)
•Thetemperatureprolesgiveninthiscatalogarevaluesmeasured
whenusingtheconnectoronaresin-basedPCboard.When
performedreowsolderingonametalboard(iron,aluminum,etc.)or
ametaltabletomountonaFPC,makesurethereisnodeformation
ordiscolorationoftheconnectorbeforemounting.
•Pleasecontactoursaleso󰀩cewhenusingascreen-printing
thicknessotherthanthatrecommended.
60 to 120 sec.
Preheating
Time
Temperature Peak temperature
200℃
220℃
260
℃
230
℃
180
℃
150
℃
Peak temperature
70 sec.
25 sec.
Upper limited
(Solder heat resistance)
Lower limited
(Solder wettability)
ー 10 ー
Active Optical Connector V Series (1 channel-Bi-direction/2 channel-Uni-direction)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/ Panasonic Corporation 2019
c ACCTB69E 201906
Manual soldering
•Setthesolderingironsothatthetiptemperatureislessthanthat
giveninthetablebelow.
TableA
Productname Solderingirontemperature
SMDtypeconnectorsallproducts
300
°Cwithin
5
sec.
350
°Cwithin
3
sec.
•DonotallowuxtospreadontotheconnectorleadsorPCboard.
Thismayleadtouxrisinguptotheconnectorinside.
•Touchthesolderingirontothefootpattern.Afterthefootpatternand
connectorterminalareheated,applythesolderwiresoitmeltsatthe
endoftheconnectorterminals.
Apply the solder
wire here
Terminal
Pattern
Small angle as
possible up to
45 degrees
Soldering
iron
PC board
•Beawarethatsolderingwhileapplyingaloadontheconnector
terminalsmaycauseimproperoperationoftheconnector.
•Thoroughlycleanthesolderingiron.
•Fluxfromthesolderwiremaygetonthecontactsurfacesduring
solderingoperations.Aftersoldering,carefullycheckthecontact
surfacesandcleano󰀨anysolderbeforeuse.
•Theseconnectorislowproletype.Iftoomuchsolderissuppliedfor
handsoldering,Itmakesmissmatingbecauseofinterferenceat
solderingportion.Pleasepayattentions.
Solder reworking
•Finishreworkinginoneoperation.
•Incaseofsolderingreworkofbridges.Donotusesupplementary
solderux.Doingsomaycausecontactproblemsbyux.
•Keepthesolderingirontiptemperaturebelowthetemperaturegiven
inTableA.
Handling single components
•Makesurenottodroporallowpartstofallfromworkbench.
•Excessiveforceappliedtotheterminalscouldcausewarping,come
out,orweakentheadhesivestrengthofthesolder.Handlewithcare.
•Donotinsertorremovetheconnectorwhenitisnotsoldered.
Forciblyappliedexternalpressureontheterminalscanweakenthe
adherenceoftheterminalstothemoldedpartorcausetheterminals
tolosetheirevenness.
Cleaning ux from PC board
Thereisnoneedtocleanthisproduct.
Ifcleaningit,payattentiontothefollowingpointstopreventthe
negativee󰀨ecttotheproduct.
•Keepthecleaningsolventcleanandpreventtheconnectorcontacts
fromcontamination.
•Somecleaningsolventsarestrongandtheymaydissolvethemolded
partandcharacters,sopurewaterpassedliquidsolventis
recommended.
Handling the PC board
Handling the PC board after mounting the connector
WhencuttingorbendingthePCboardaftermountingtheconnector,
becarefulthatthesolderedsectionsaresubjectedtoexcessiveforce.
The soldered areas should not be subjected to force.
Storage of connectors
•Topreventproblemsfromvoidsorairpocketsduetoheatofreow
soldering,avoidstoringtheconnectorsinareasofhighhumidity.
•Dependingontheconnectortype,thecoloroftheconnectormay
varyfromconnectortoconnectordependingonwhenitisproduced.
Someconnectorsmaychangecolorslightlyifsubjectedtoultraviolet
raysduringstorage.Thisisnormalandwillnota󰀨ecttheoperationof
theconnector.
•WhenstoringtheconnectorswiththePCboardsassembledand
componentsalreadyset,becarefulnottostackthemupsothe
connectorsaresubjectedtoexcessiveforces.
•Avoidstoringtheconnectorsinlocationswithexcessivedust.
Thedustmayaccumulateandcauseimproperconnectionsatthe
contactsurfaces.
Other Notes
•Donotremoveorinserttheelectriedconnector(inthestateof
carryingcurrentorapplyingvoltage).
•Droppingoftheproductsorroughmishandlingmaybendordamage
theterminalsandpossiblyhinderproperreowsoldering.
•Beforesoldering,trynottoinsertorremovetheconnectormorethan
absolutelynecessary.
•WhencoatingthePCboardaftersolderingtheconnectortoprevent
thedeteriorationofinsulation,performthecoatinginsuchawayso
thatthecoatingdoesnotgetontheconnector.
•Theremaybevariationsinthecolorsofproductsfromdi󰀨erent
productionlots.Thisisnormal.
•Theconnectorsarenotmeanttobeusedforswitching.
•Productfailuresduetocondensationarenotcoveredbywarranty.
Pleasereferto"the latest product specications"
whendesigningyourproduct.
•Requeststocustomers:
https://industrial.panasonic.com/ac/e/salespolicies/
ー 11 ー
Please contact ..........
Electromechanical Control Business Division
industral.panasonic.com/ac/e/
Specifications are subject to change without notice.
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan
©Panasonic Corporation 2019
ACCTB69E 201906