ATV630D11N4 Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications variable speed drive ATV630, 11kW/15HP, 380...480V, IP21/UL type 1 Main Range of product Altivar Process ATV600 Product or component type Variable speed drive Product specific application Process and utilities Device short name ATV630 Variant Standard version Product destination Synchronous motors Asynchronous motors EMC filter Integrated with 50m conforming to EN/IEC 61800-3 category C2 Integrated with 150m conforming to EN/IEC 61800-3 category C3 IP degree of protection IP21 conforming to IEC 61800-5-1 IP21 conforming to IEC 60529 Degree of protection UL type 1 conforming to UL 508C Type of cooling Forced convection Supply frequency 50...60 Hz - 5...5 % [Us] rated supply voltage 380...480 V - 15...10 % Motor power kW 11kW (normal duty) 7.5kW (heavy duty) Motor power hp 15hp normal duty 10hp heavy duty Line current 19.8A at 380 V (normal duty) 17A at 480 V (normal duty) 14.1A at 380 V (heavy duty) 12.5A at 480 V (heavy duty) Prospective line Isc 50kA Apparent power 14.1kVA at 480 V (normal duty) 10.4kVA at 480 V (heavy duty) Continuous output current 23.5A at 4 kHz for normal duty 16.5A at 4 kHz for heavy duty Maximum transient current 25.9A during 60 s (normal duty) 24.8A during 60 s (heavy duty) Feb 23, 2021 1 Asynchronous motor control profile Constant torque standard Optimized torque mode Variable torque standard Synchronous motor control profile Permanent magnet motor Synchronous reluctance motor Output frequency 0.0001...0.5kHz Speed drive output frequency 0.1...599Hz Nominal switching frequency 4 kHz Switching frequency 2...12 kHz adjustable 4...12 kHz with derating factor Safety function STO (safe torque off) SIL 3 Discrete input logic 16 preset speeds Communication port protocol Modbus TCP Ethernet Modbus serial Option card Slot A: communication module, Profibus DP V1 Slot A: communication module, Profinet Slot A: communication module, DeviceNet Slot A: communication module, Modbus TCP/EtherNet/IP Slot A: communication module, CANopen daisy chain RJ45 Slot A: communication module, CANopen SUB-D 9 Slot A: communication module, CANopen screw terminals Slot A/slot B: digital and analog I/O extension module Slot A/slot B: output relay extension module Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link Communication module, BACnet MS/TP Communication module, Ethernet Powerlink Complementary Mounting mode Wall mount Output voltage <= power supply voltage Permissible temporary current boost 1.1 x In during 60 s (normal duty) 1.5 x In during 60 s (heavy duty) Motor slip compensation Adjustable Can be suppressed Not available in permanent magnet motor law Automatic whatever the load Acceleration and deceleration ramps Linear adjustable separately from 0.01...9999 s Braking to standstill By DC injection Protection type Thermal protection: motor Safe torque off: motor Motor phase break: motor Thermal protection: drive Safe torque off: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive Frequency resolution Display unit: 0.1 Hz Analog input: 0.012/50 Hz Electrical connection Control: removable screw terminals 0.5...1.5 mm/AWG 20...AWG 16 Motor: screw terminal 6...10 mm/AWG 10...AWG 8 Line side: screw terminal 6 mm/AWG 10 Connector type RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP RJ45 (on the remote graphic terminal) for Modbus serial Exchange mode Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP Number of addresses 1...247 for Modbus serial Method of access Slave Modbus TCP 2 Supply External supply for digital inputs: 24 V DC (19...30V), <1.25mA, protection type: overload and shortcircuit protection Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10mA, protection type: overload and short-circuit protection Internal supply for digital inputs and STO: 24 V DC (21...27V), <200mA, protection type: overload and short-circuit protection Local signalling 3 LEDs for local diagnostic 3 LEDs (dual colour) for embedded communication status 4 LEDs (dual colour) for communication module status 1 LED (red) for presence of voltage Width 171mm Height 409mm Depth 233mm Net weight 7.7kg Analogue input number 3 Analogue input type AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits Discrete input number 8 Discrete input type DI1...DI6 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI5, DI6 programmable as pulse input: 0...30kHz, 24 V DC (<= 30 V) STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm Input compatibility DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2 DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68 STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2 Discrete input logic Positive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1) Negative logic (sink) (DI1...DI6), > 16 V (state 0), < 10 V (state 1) Positive logic (source) (DI5, DI6), < 0.6 V (state 0), > 2.5 V (state 1) Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1) Analogue output number 2 Analogue output type Software-configurable voltage AO1, AO2: 0...10 V DC impedance 470Ohm, resolution 10 bits Software-configurable current AO1, AO2: 0...20 mA, resolution 10 bits Sampling duration 2ms +/- 0.5 ms (DI1...DI4) - discrete input 5ms +/- 1 ms (DI5, DI6) - discrete input 5ms +/- 0.1 ms (AI1, AI2, AI3) - analog input 10ms +/- 1 ms (AO1) - analog output Accuracy +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 C analog input +/- 1 % AO1, AO2 for a temperature variation 60 C analog output Linearity error AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input AO1, AO2: +/- 0.2 % for analog output Relay output number 3 Relay output type Configurable relay logic R1: fault relay NO/NC electrical durability 100000cycles Configurable relay logic R2: sequence relay NO electrical durability 100000cycles Configurable relay logic R3: sequence relay NO electrical durability 100000cycles Refresh time Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) Minimum switching current Relay output R1, R2, R3: 5mA at 24 V DC Maximum switching current Relay output R1, R2, R3 on resistive load, cos phi = 1: 3A at 250 V AC Relay output R1, R2, R3 on resistive load, cos phi = 1: 3A at 30 V DC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7ms: 2A at 250 V AC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7ms: 2A at 30 V DC Isolation Between power and control terminals Variable speed drive application selection Compressor centrifugal Building - HVAC Other application Food and beverage processing Fan Mining mineral and metal Pump Mining mineral and metal Fan Oil and gas Other application Water and waste water Screw compressor Building - HVAC Pump Food and beverage processing Fan Food and beverage processing Atomization Food and beverage processing Electro submersible pump (ESP) Oil and gas Water injection pump Oil and gas Jet fuel pump Oil and gas Compressor for refinery Oil and gas Centrifuge pump Water and waste water 3 Positive displacement pump Water and waste water Electro submersible pump (ESP) Water and waste water Screw pump Water and waste water Lobe compressor Water and waste water Screw compressor Water and waste water Compressor centrifugal Water and waste water Fan Water and waste water Conveyor Water and waste water Mixer Water and waste water Motor power range AC-3 7...11kW at 380...440V 3 phases 7...11kW at 480...500V 3 phases Environment Insulation resistance > 1 MOhm 500 V DC for 1 minute to earth Noise level 56dB conforming to 86/188/EEC Power dissipation in W Natural convection: 51W at 380 V, switching frequency 4 kHz Forced convection: 255W at 380 V, switching frequency 4 kHz Volume of cooling air 103m3/h Operating position Vertical +/- 10 degree Maximum THDI <48% from 80...100 % of load conforming to IEC 61000-3-12 Electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 s - 8/20 s surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Pollution degree 2 conforming to EN/IEC 61800-5-1 Vibration resistance 1.5 mm peak to peak (f= 2...13Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200Hz) conforming to IEC 60068-2-6 Shock resistance 15 gn for 11ms conforming to IEC 60068-2-27 Relative humidity 5...95% without condensation conforming to IEC 60068-2-3 Ambient air temperature for operation -15...50C (without derating) 50...60C (with derating factor) Ambient air temperature for storage -40...70C Operating altitude <= 1000 m without derating 1000...4800 m with current derating 1 % per 100 m Standards UL 508C EN/IEC 61800-3 Environment 1 category C2 EN/IEC 61800-3 Environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 Product certifications ATEX INERIS CSA UL ATEX zone 2/22 DNV-GL TUV Marking CE Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 10.467kg Package 1 Height 35cm Package 1 width 21.5cm Package 1 Length 58cm Unit Type of Package 2 P06 Number of Units in Package 2 3 4 Package 2 Weight 44.4kg Package 2 Height 80cm Package 2 width 80cm Package 2 Length 60cm Offer Sustainability Sustainable offer status Green Premium product REACh Regulation REACh Declaration EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information WEEE The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Upgradeability Upgraded components available 5 Product data sheet Dimensions Drawings Dimensions Drives with IP21 Top Cover Front and Left Views Drives Without IP21 Top Cover Left and Rear Views 6 ATV630D11N4 ATV630D11N4 Product data sheet Mounting and Clearance Clearances X1 X2 X3 100 mm (3.94 in.) 100 mm (3.94 in.) 10 mm (0.39 in.) 7 Product data sheet Mounting and Clearance Mounting Types Mounting Type A: Individual IP21 a 100 mm (3.94 in.) Mounting Type B: Side by Side IP20 Mounting Type C: Individual IP20 a 8 0 ATV630D11N4 Product data sheet Connections and Schema ATV630D11N4 Three-Phase Power Supply with Upstream Breaking via Line Contactor Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with standard IEC/EN (1) (2) A1 : KM1 : Q2, Q3 : S1, S2 : T1 : Line choke if used Use relay R1 set to operating state Fault to switch Off the product once an error is detected. Drive Line Contactor Circuit breakers Pushbuttons Transformer for control part 9 Product data sheet Connections and Schema ATV630D11N4 Three-Phase Power Supply with Downstream Breaking via Contactor Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with standard IEC/EN 6 (1) (2) A1 : KM1 : 10 Line choke if used Use relay R1 set to operating state Fault to switch Off the product once an error is detected. Drive Contactor Product data sheet Connections and Schema ATV630D11N4 Control Block Wiring Diagram (1) Safe Torque Off (2) Analog Output (3) Digital Input (4) Reference potentiometer (5) Analog Input R1A, R1B,Fault R1Crelay : R2A, R2CSequence : relay R3A, R3CSequence : relay Sensor Connection It is possible to connect either 1 or 3 sensors on terminals AI2 or AI3. 11 Product data sheet Connections and Schema ATV630D11N4 Sink / Source Switch Configuration The switch is used to adapt the operation of the logic inputs to the technology of the programmable controller outputs. Set the switch to Source (factory setting) if using PLC outputs with PNP transistors. Set the switch to Ext if using PLC outputs with NPN transistors. Switch Set to SRC (Source) Position Using the Output Power Supply for the Digital Inputs Switch Set to SRC (Source) Position and Use of an External Power Supply for the DIs Switch Set to SK (Sink) Position Using the Output Power Supply for the Digital Inputs Switch Set to EXT Position Using an External Power Supply for the DIs 12 Product data sheet Performance Curves ATV630D11N4 Derating Curves In : SF : 40 C (104 F) - Mounting type A, B and C 50 C (122 F) - Mounting type A, B and C 60 C (140 F) - Mounting type B and C Nominal Drive Current Switching Frequency 13