Thin Film, Rectangular, Resistor Chips
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 20028
202 Revision: 08-Jan-09
M10, M11, M12, M25
Vishay Draloric
Not for New Designs,
alternatively please use TNPW e3
FEATURES
•Metal film layer on high quality ceramic
•Protective top coat
•Pure tin on nickel barrier layer
•Low temperature coefficient and tight tolerances
•56 days at 40 °C and 93 % relative humidity down to
≤ ± 0.2 %
Notes:
•Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
•Marking: 4 digits, M10 - no marking
Notes:
(1) Measuring conditions in acc. with EN 140 401-801
(2) Rated voltage:
RoHS
COMPLIANT
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE POWER RATING
P70 °C LIMITING ELEMENT
VOLTAGE MAX.
V≅
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE
Ω
E-SERIES
INCH METRIC EN 140
401-801 EIA
575
M10 0402 1005 0.063 0.063 25 ± 25 ± 0.5; ± 1 10R - 20K
24 - 96
± 50 ± 0.5 10R - 20K
M11 0603 1608 0.1 0.063 75 ± 25 ± 0.1; ± 0.25;
± 0.5; ± 1 10R - 56K
24 - 96
± 50 ± 0.1; ± 0.25; ± 0.5; 10R - 56K
M12 0805 2012 0.125 0.1 150 ± 25 ± 0.1; ± 0.25;
± 0.5; ± 1 10R - 100K
24 - 96
± 50 ± 0.1; ± 0.25; ± 0.5; 10R - 100K
M25 1206 3216 0.25 0.125 200 ± 25 ± 0.1; ± 0.25;
± 0.5; ± 1 10R - 220K
24 - 96
± 50 ± 0.1; ± 0.25; ± 0.5; 10R - 220K
TECHNICAL SPECIFICATIONS
PARAMETER UNIT M10 M11 M12 M25
Rated Dissipation at 70 °C
(EN 140 401-801| EIA 575) W 0.063 0.1 0.063 0.125 0.1 0.25 0.125
Limiting Element Voltage (2) V≅25 75 150 200
Insulation Voltage (1 min) Vdc/ac peak > 50 > 100 > 200 > 300
Thermal Resistance (1) K/W ≤ 870 (1) -≤ 550 (1) -≤ 440 (1) -≤ 220 (1) -
Insulation Resistance Ω> 10 9
Category Temperature Range °C - 55 to + 125 (+ 155)
Failure Rate h-1 0.3 x 10- 9
Weight/1000 pieces g 0.65 2 5.5 10
P x R
Document Number: 20028 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 08-Jan-09 203
M10, M11, M12, M25
Thin Film, Rectangular, Resistor Chips Vishay Draloric
Not for New Designs,
alternatively please use TNPW e3
DIMENSIONS
Notes:
(1) Please refer to table PACKAGING, page 146
(2) Products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER
SIZE DIMENSIONS [in millimeters]
INCH METRIC L W H T1 T2
0402 1005 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.1 0.2 ± 0.1
0603 1608 1.55 0.85 ± 0.1 0.45 ± 0.05 0.30 ± 0.2 0.3 ± 0.2
0805 2012 2.0 1.25 ± 0.15 0.45 ± 0.05 0.30 0.3 ± 0.2
1206 3216 3.2 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2
SOLDER PAD DIMENSIONS [in millimeters]
SIZE REFLOW WAVE SOLDERING
INCH METRIC a b l a b l
0402 1005 0.4 0.6 0.5
0603 1608 0.5 0.9 1.0 0.9 0.9 1.0
0805 2012 0.7 1.4 1.2 0.9 1.3 1.3
1206 3216 0.9 1.7 2.0 1.1 1.7 2.3
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBERING: M1004020D5620DP000
MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PACK AGING (1) SPECIAL
M100402
M110603
M120805
M251206
0 = Neutral D = ± 25 ppm/K
C = ± 50 ppm/K
3 digit value
1 digit multiplier
Multiplier
8 = *10- 2
9 = *10- 1
0 = *100
1 = *101
2 = *102
3 = *103
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
P0
P1
P5
PN
PZ
Up to 2 digits
00 = standard
PRODUCT DESCRIPTION: M10 25 562R 0.5 % P0
M10 25 562R 0.5 % P0
MODEL TCR RESISTANCE VALUE TOLERANCE PAC K AG I N G (1)
M10
M11
M12
M25
± 25 ppm/K
± 50 ppm/K
49K9 = 49.9 kΩ
5R1 = 5.1 Ω
± 0.1 %
± 0.25 %
± 0.5 %
± 1 %
P0
P1
P5
PN
PZ
+ 0.10
- 0.05
+ 0.20
- 0.10
+ 0.10
- 0.20
+ 0.20
- 0.10
M 01 0 0 4 0 2 0 D 5 6 2 0 D P 0 0
