Data sheet
REGplus IP20 E-DAT modul
Page 1/7
P/N
1309107003-E
EAN 4250184136569
2019/10/25
Version: AF
Illustrations Dimensional drawing
See enlarged drawings at the end of document
Product specification
• termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations
• equipped with individual E-DAT modul RJ45 module
• cable feed 45° from the top, plug direction 45° downwards
• component testing for Cat.6A to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51
Ed.1 (12/2008), certified to GHMT
• compliance with class E to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
• tested: Link up to 500 MHz
• suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
• easy to install connection of 2 to 4 pair data lines AWG 26/1 - 22/1 and stranded wires with 7 copper conductors AWG 26/7 - 22/7 to BTR
8-fold insulation displacement connectors (IDC)
• marking of conductor assignment to T568A or T568B
• easy and fast insertion of wire pairs in E-DAT modul stuffer cap
• width of 1HP allows mounting up to 12 REG plus in standard electrical distribution panels
• when mounted as a device of protection class I, the equipotential bonding is realized directly over the top hat rail by means of an integrated
equipotential plate. This has to be connected to the equipotential bonding of the building by means of a bonding terminal
• a cover protects the module against direct contact. If mounted in distributor panels with protective insulation, protection class II is guaranteed.
In this case, it is necessary to remove the equipotential bonding spring.
• integrated dust protection cover (also colored)
Data sheet
REGplus IP20 E-DAT modul Page 2/7
P/N
1309107003-E
EAN 4250184136569
2019/10/25
Version: AF
Technical Data
General Data
Fields of application
Office
Design wall outlet
Mounting style Standard rail TH35
Shielding shielded
Transmission technology Copper
Color light gray
Dimensions
Dimension (L x W x H) 60 mm x 17.5 mm x 60 mm
Dimension (L x W x H) 2.362 in. x 0.689 in. x 2.362 in.
Horizontal pitch 1HP
Labeling option label window with identification label
Marking option by dust protection
Transmission characteristics
Category (ISO) 6
Class (ISO/IEC) EA
Category (TIA) 6
Remote Powering yes
PoE IEEE 802.3af
PoE plus IEEE 802.3at
UPoE yes
4PPoE IEEE 802.3bt
HDBaseT yes
Transmission rate up to 10 GBit IEEE 802.3an
Connections/interfaces
Connector technology interface 1 IDC-connection
Connector technology interface 2 RJ45-jack
Number of ports interface 2 1
Number of ports interface 2 equipped 1
Number of positions/contacts interface 1 8
Number of positions/contacts interface 2 8P/8C
Data sheet
REGplus IP20 E-DAT modul Page 3/7
P/N
1309107003-E
EAN 4250184136569
2019/10/25
Version: AF
Technical Data
Connections/interfaces
Termination data, solid wire (min. - max.)
Conductor cross section, solid wire AWG 26/1 - AWG 22/1
Conductor cross section, solid wire 0.128 mm² - 0.324 mm²
Conductor diameter, solid wire (bare copper) 0.409 mm - 0.643 mm
Conductor diameter, solid wire (bare copper) 0.016 in. - 0.025 in.
Termination data, stranded wire (min. - max.)
Conductor cross section, stranded wire AWG 26/7 - AWG 22/7
Conductor cross section, stranded wire 0.141 mm² - 0.355 mm²
Conductor diameter, stranded wire (bare copper) 0.483 mm - 0.762 mm
Conductor diameter, stranded wire (bare copper) 0.019 in. - 0.03 in.
Cable sheath diameter (min. - max.)
Cable sheath diameter 5.5 mm - 10.00
Cable sheath diameter 0.197 in. - 0.394
Module plug-in direction 45° downwards
Cable access/outlet 45° from the top
Elektrische/ Optische Eigenschaften
Current carrying capacity max. 1 A
Contact resistance max. 20 mOhm
Insulation resistance min. 500 MOhm
Dielectric strength conductor-conductor (secondary) min. 1000 V DC
Mechanical characteristics
Insertion and withdrawal force max. 30 N
Position/mounting of latch - standard installation
position top
Materials and material properties
Material - Housing GD-Zn (zinc die-cast)
Material - Label window ABS, transparent
Material - Dust protection ABS
Material - Contact CuSn (tin bronze)
Material - Contact finish Ni + Au (nickel-gold)
Material - Contact carriers PA 6.6
Material - Finish Ni (nickel)
Material - Ground connection CuSn4
Data sheet
REGplus IP20 E-DAT modul Page 4/7
P/N
1309107003-E
EAN 4250184136569
2019/10/25
Version: AF
Technical Data
Materials and material properties
RoHS compliant
REACH - substance (SVHC) none
Environmental conditions
Temperature (min. - max.)
Temperature - Storage °C -40 °C - 70 °C
Temperature - Storage °F -40 °F - 158 °F
Temperature - Operating °C -40 °C - 70 °C
Temperature - Operating °F -40 °F - 158 °F
Particulate ingress IP2X
Liquid ingress/immersion IPX0
Rapid change of temperature -40°C / -40°F - +70°C / 158°F / 25 cycles t=30 min
Electromagnetic measurement E2
Certifications
GHMT Type Approval Component (valid to: 11/2019)
The product meets the following standards
Generic cabling systems
General requirements ANSI/TIA-568
Connectors for electronic equipment
Free and fixed connectors DIN EN 60603-7-51:2011-01
Connectors for electronic equipment - Tests and measurements
Test schedule for connectors DIN-EN 60512-99-001, Pg. UEL1
Interference proof
Immunity for industrial environments DIN EN 61000-6-2:2006-03
Classifications
ETIM 5.0 EC001024
ETIM 6.0 EC001024
ETIM 7.0 EC001024
Data sheet
REGplus IP20 E-DAT modul Page 5/7
P/N
1309107003-E
EAN 4250184136569
2019/10/25
Version: AF
Technical Data
Packing details
Type of packaging 10 pc(s) / box
Packaging unit - Weight (gram) 697 g
Packaging unit - Weight (pound) 1.54 lb
Packaging dimension 235 mm x 165 mm x 135 mm
Packaging dimension 9.252 in. x 6.496 in. x 5.315 in.
Data sheet
REGplus IP20 E-DAT modul Page 6/7
P/N
1309107003-E
EAN 4250184136569
2019/10/25
Version: AF
Accessories
P/N Designation
816979-0105-I Dust protection covers for Modul patch panels
subway / REG yellow
816979-0106-I Dust protection covers for Modul patch panels
subway / REG blue
816979-0107-I Dust protection covers for Modul patch panels
subway / REG green
816979-0108-I Dust protection covers for Modul patch panels
subway / REG red
899011-01 Label sheet for Modul patch panels / REG
