Pletronics, Inc. vs ple 19013 36th Ave. W, Suite H= Lynnwood, WA 98036 USA Manufacturer of High Quality Frequency Control Products SM10T Crystal @ 4 Pad 3.2x2.5mm Surface Mount Crystal (Metal Cover Seam Sealed to Ceramic Base) 16.000 MHz 60.000 MHz Standard Specifications Calibration Frequency Tolerance at 25C = + 30 PPMis standard, tighter tolerances available Operating Temperature Range (OTR) 0 to +70C is standard, but can be extended to -40 to +85C Frequency Stability (FS) over OTR +50 PPM is standard, tighter tolerances available Drive Level 100 pW is standard, customer may specify Aging at 25C +3 PPM maximum Shunt Capacitance 5 pF maximum Part Numbering Guide ESR Values Portions of the part number that appear after the frequency may not Oscillation Frequency Range Maximum be marked on part (C of C provided) Mode (MHz) ESR (Ohms) Fundamental 16.000 - 29.999 100 B E- xx T OM - XXX (Internal Code or blank) AT Cut 30.000 60.000 50 wodet ~L sreauene in MHz Consult factory for lower ESR Load Capacitance Paralle! Resonance i in pF (> 10 pF) Blank = 30/50 B = 30/30 Temperature Range C = 15/30 Blank: 0 to +70C D = 10/20 (consult factory) E: - 40 to +85C H: - 20 to +70C Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned. Mechanical: inches (mm not to scale Xe) lo (=t am at= leks Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code. Packaging 8mm tape 4mm pitch 0. 026 (.7) ( : OO y uy m 3 | % = S U nik .05 (1.3) a | 0.098 (2.5 + .1) 0.028 (0.7) 0. Ls (1.1) MAX Mar 2004 Pletronics. Ine. (425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com 29