SPECIFICATION (Reference sheet) Supplier : Samsung electro-mechanics Product : Multi-layer Ceramic Capacitor Samsung P/N : CL05B472KB5NNND Description : CAP, 4.7, 50V, 10%, X7R, 0402 A. Samsung Part Number Series Size CL 05 B 472 K B 5 N N N D Samsung Multi-layer Ceramic Capacitor 0402 (inch code) L: 1.0 0.05 X7R Dielectric 4.7 Capacitance 10 % Capacitance tolerance 50 V Rated Voltage 0.5 0.05 mm Thickness B. Samsung Reliability Test and Judgement condition mm Inner electrode Termination Plating Product Special Packaging Performance Capacitance Tan (DF) Insulation Resistance Appearance Withstanding Voltage Temperature Characteristics Adhesive Strength of Termination Bending Strength Solderability W: 0.5 0.05 mm Ni Cu Sn 100% (Pb Free) Normal Reserved for future use Cardboard Type, 13" reel Test condition Within specified tolerance 0.025 max. 110% 1.00.2Vrms 10,000Mohm or 500Mohm Whichever is Smaller No abnormal exterior appearance No dielectric breakdown or mechanical breakdown X7R Rated Voltage 60~120 sec. Microscope (10) 250% of the rated voltage (From -55 to 125, Capacitance change should be within 15%) No peeling shall be occur on the 500gF, for 101 sec. terminal electrode Capacitance change : within 12.5% Bending to the limit (1mm) with 1.0mm/sec. More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Soldering heat Capacitance change : Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Test condition Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours 3 direction (x, y, z) within 12.5% With rated voltage Moisture Resistance Capacitance change : Tan : 0.05 max IR : 25* or Over High Temperature Resistance Capacitance change : within 12.5% With 200% of the rated voltage Tan : 0.05 max Max. operating temperature IR : 50* or Over 1000+48/-0hrs Capacitance change : within 7.5% 1 cycle condition Tan , IR : initial spec. Min. operating temperature Max. operating temperature Temperature Cycling 402, 90~95%RH, 500+12/-0hrs 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) Product specifications included in the specifications are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers. 25 25