BD243B, BD243C (NPN) BD244B, BD244C (PNP) Complementary Silicon Plastic Power Transistors These devices are designed for use in general purpose amplifier and switching applications. Features 6 AMPERE POWER TRANSISTORS COMPLEMENTARY SILICON 80-100 VOLTS 65 WATTS * Collector - Emitter Saturation Voltage - VCE(sat) = 1.5 Vdc (Max) @ IC = 6.0 Adc * Collector Emitter Sustaining Voltage - * * http://onsemi.com VCEO(sus) = 80 Vdc (Min) - BD243B, BD244B = 100 Vdc (Min) - BD243C, BD244C High Current Gain Bandwidth Product fT = 3.0 MHz (Min) @ IC = 500 mAdc Pb-Free Packages are Available* MAXIMUM RATINGS Rating Symbol Collector-Emitter Voltage BD243B, BD244B BD243C, BD244C VCEO Collector-Base Voltage BD243B, BD244B BD243C, BD244C Emitter-Base Voltage VCB Value Unit TO-220AB CASE 221A-09 STYLE 1 Vdc 80 100 1 Vdc 80 100 2 3 VEB 5.0 Vdc IC 6 10 Adc Base Current IB 2.0 Adc Total Device Dissipation @ TC = 25C Derate above 25C PD 65 0.52 W W/C BD24xyG TJ, Tstg -65 to +150 C AY WW Symbol Max Unit RqJC 1.92 C/W Collector Current - Continuous - Peak Operating and Storage Junction Temperature Range MARKING DIAGRAM THERMAL CHARACTERISTICS Characteristics Thermal Resistance, Junction-to-Case Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. BD24xy = A Y WW G = = = = Device Code x = 3 or 4 y = B or C Assembly Location Year Work Week Pb-Free Package ORDERING INFORMATION *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2011 October, 2011 - Rev. 13 1 See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. Publication Order Number: BD243B/D BD243B, BD243C (NPN) BD244B, BD244C (PNP) PD, POWER DISSIPATION (WATTS) 80 60 40 20 0 0 20 40 60 80 100 120 TC, CASE TEMPERATURE (C) 140 160 Figure 1. Power Derating IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted) Characteristic Symbol Collector-Emitter Sustaining Voltage (Note 1) (IC = 30 mAdc, IB = 0) Collector Cutoff Current (VCE = 60 Vdc, IB = 0) BD243B, BD244B BD243C, BD244C BD243B, BD243C, BD244B, BD244C Collector Cutoff Current (VCE = 80 Vdc, VEB = 0) (VCE = 100 Vdc, VEB = 0) BD243B, BD244B BD243C, BD244C Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) Min Max 80 100 - - - 0.7 - - 400 400 - 1.0 30 15 - - VCEO(sus) ICEO ICES IEBO Unit Vdc mAdc mAdc mAdc ON CHARACTERISTICS (Note 1) DC Current Gain (IC = 0.3 Adc, VCE = 4.0 Vdc) (IC = 3.0 Adc, VCE = 4.0 Vdc) hFE - Collector-Emitter Saturation Voltage (IC = 6.0 Adc, IB = 1.0 Adc) VCE(sat) - 1.5 Vdc Base-Emitter On Voltage (IC = 6.0 Adc, VCE = 4.0 Vdc) VBE(on) - 2.0 Vdc Current-Gain - Bandwidth Product (Note 2) (IC = 500 mAdc, VCE = 10 Vdc, ftest = 1.0 MHz) fT 3.0 - MHz Small-Signal Current Gain (IC = 0.5 Adc, VCE = 10 Vdc, f = 1.0 kHz) hfe 20 - - DYNAMIC CHARACTERISTICS 1. Pulse Test: Pulsewidth v 300 ms, Duty Cycle v 2.0%. 2. fT = hfe * ftest http://onsemi.com 2 BD243B, BD243C (NPN) BD244B, BD244C (PNP) 2.0 VCC - 30 V TJ = 25C VCC = 30 V IC/IB = 10 1.0 25 ms 0.7 0.5 RC + 11 V t, TIME (s) SCOPE RB 0 - 9.0 V 51 tr, tf v 10 ns DUTY CYCLE = 1.0% D1 0.3 0.2 tr 0.1 0.07 0.05 -4V RB AND RC VARIED TO OBTAIN DESIRED CURRENT LEVELS 0.03 0.02 0.06 D1 MUST BE FAST RECOVERY TYPE eg. 1N5825 USED ABOVE IB [ 100 mA MSD6100 USED BELOW IB [ 100 mA td @ VBE(off) = 5.0 V 1.0 0.2 0.4 0.6 2.0 IC, COLLECTOR CURRENT (AMP) 0.1 r(t) EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 2. Switching Time Test Circuit 1.0 0.7 0.5 D = 0.5 0.3 0.2 4.0 6.0 Figure 3. Turn-On Time 0.2 0.1 P(pk) 0.05 0.1 0.07 0.05 RqJC(max) = 1.92C/W 0.02 t1 0.03 0.01 0.02 SINGLE PULSE t2 SINGLE PULSE D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) RqJC(t) DUTY CYCLE, D = t1/t2 0.01 0.01 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10 t, TIME OR PULSE WIDTH (ms) 20 30 50 100 200 300 500 1000 Figure 4. Thermal Response There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC - VCE limits of the transistor that must be observed for reliable operation, i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 5 is based on TJ(pk) = 150C: TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(pk) v 150C, TJ(pk) may be calculated from the data in Figure 4. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 10 0.5 ms IC, COLLECTOR CURRENT (AMP) 5.0 3.0 1.0 ms 2.0 TJ = 150C SECOND BREAKDOWN LIMITED BONDING WIRE LIMITED THERMAL LIMITATION @ TC = 25C 1.0 0.5 5.0 ms CURVES APPLY BELOW RATED VCEO 0.3 0.2 0.1 5.0 BD243B, BD244B BD243C, BD244C 40 80 10 20 60 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 100 Figure 5. Active Region Safe Operating Area http://onsemi.com 3 BD243B, BD243C (NPN) BD244B, BD244C (PNP) 5.0 300 TJ = 25C VCC = 30 V IC/IB = 10 IB1 = IB2 ts t, TIME (s) 1.0 TJ = 25C 200 CAPACITANCE (pF) 3.0 2.0 0.7 0.5 0.3 0.2 tf 0.1 0.07 0.05 0.06 100 70 Cob 50 1.0 0.2 0.4 0.6 2.0 IC, COLLECTOR CURRENT (AMP) 0.1 Cib 30 0.5 4.0 6.0 1.0 2.0 3.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) Figure 6. Turn-Off Time 30 20 VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) hFE, DC CURRENT GAIN VCE = 2.0 V TJ = 150C 100 70 50 25C -55C 10 7.0 5.0 0.06 0.1 0.2 0.3 0.4 0.6 1.0 2.0 IC, COLLECTOR CURRENT (AMP) 4.0 6.0 2.0 TJ = 25C 1.6 IC = 1.0 A V, TEMPERATURE COEFFICIENTS (mV/C) TJ = 25C V, VOLTAGE (VOLTS) 1.6 0.4 0 0.06 VBE(sat) @ IC/IB = 10 VBE @ VCE = 4.0 V VCE(sat) @ IC/IB = 10 0.1 0.2 0.3 0.4 0.6 1.0 5.0 A 0.8 0.4 0 10 20 30 50 100 200 300 IB, BASE CURRENT (mA) 500 1000 Figure 9. Collector Saturation Region 2.0 0.8 2.5 A 1.2 Figure 8. DC Current Gain 1.2 50 Figure 7. Capacitance 500 300 200 30 2.0 3.0 4.0 +2.5 +2.0 +1.5 +1.0 + 25C to + 150C +0.5 0 *qVC FOR VCE(sat) - 55C to + 25C -0.5 + 25C to + 150C -1.0 -1.5 qVB FOR VBE - 55C to + 25C -2.0 -2.5 0.06 6.0 *APPLIES FOR IC/IB 5.0 0.1 0.2 0.3 0.5 1.0 2.0 3.0 0.4 IC, COLLECTOR CURRENT (AMPS) IC, COLLECTOR CURRENT (AMP) Figure 10. "On" Voltages Figure 11. Temperature Coefficients http://onsemi.com 4 0.6 RBE , EXTERNAL BASE-EMITTER RESISTANCE (OHM BD243B, BD243C (NPN) BD244B, BD244C (PNP) 103 IC, COLLECTOR CURRENT (A) VCE = 30 V 102 TJ = 150C 101 100C 25C 100 10-1 IC = ICES 10-2 REVERSE 10-3 -0.3 -0.2 -0.1 FORWARD 0 +0.1 +0.2 +0.3 +0.4 +0.5 +0.6 +0.7 10M VCE = 30 V 1.0M IC = 10 x ICES IC = 2 x ICES 100k IC ICES 10k 1.0k (TYPICAL ICES VALUES OBTAINED FROM FIGURE 12) 0.1k 20 40 60 80 100 120 140 160 VBE, BASEEMITTER VOLTAGE (VOLTS) TJ, JUNCTION TEMPERATURE (C) Figure 12. Collector Cut-Off Region Figure 13. Effects of Base-Emitter Resistance ORDERING INFORMATION Device BD243B BD243BG BD243C BD243CG BD244B BD244BG BD244C BD244CG Package Shipping TO-220 TO-220 (Pb-Free) 50 Units / Rail TO-220 TO-220 (Pb-Free) 50 Units / Rail TO-220 TO-220 (Pb-Free) 50 Units / Rail TO-220 TO-220 (Pb-Free) 50 Units / Rail For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 5 BD243B, BD243C (NPN) BD244B, BD244C (PNP) PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AG -T- B F SEATING PLANE C T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q U 1 2 3 H K Z L R V J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.036 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.91 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 BASE COLLECTOR EMITTER COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BD243B/D