PRODUCT: PESD0402-140 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27440 REV LETTER: H REV DATE: JULY 26, 2016 PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against damage from electrostatic discharge (ESD) events Assists equipment to pass IEC 61000-4-2, level 4 testing FEATURES 0.25 pF (typ) Capacitance Low leakage current Low clamping voltage Fast response time (<1ns) Capable of withstanding numerous ESD strikes Compatible with standard reflow installation procedures Thick film technology Bi-directional protection APPLICATIONS HDMI 1.3 interface LCD, HDTV Cellular phones Antennas (cell phones, GPS...) Portable video devices (PDA, DSC, Bluetooth...) Printer ports High speed Ethernet USB 2.0 and IEEE 1394 interfaces DVI interface CAUTION: This device should not be used in Power Bus applications MATERIALS INFORMATION RoHS Compliant ELV Compliant Halogen Free* Lead-free HF PART NUMBERING PESD 0402 - 140 Series Operating Voltage Designator 14 x 100 = 14VDC EIA Size * Halogen Free refers to: Br900ppm, Cl900ppm, Br+Cl1500pp (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 littelfuse.com PRODUCT: PESD0402-140 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27440 REV LETTER: H REV DATE: JULY 26, 2016 PAGE NO.: 2 OF 9 TYPICAL DEVICE RATINGS AND CHARACTERISTICS Continuous Typical Typical TLP Typical Max TLP Clamping Capacitance2 Operating Trigger Voltage1 @ 1 MHz, Voltage Voltage1 after 30ns 1Vrms Symbol Unit Value VDC V 14 VT(TLP) V 250 VC(TLP 30) V 40 Cp pF 0.25 Typical Leakage Current @14VDC Max Leakage Current @14VDC IL(Typ) A <0.01 IL(MAX) A 10.0 Note 1: TLP test method at 1000V (refer to FIG. 5 on page 5) Note 2: Typical capacitance @ 0V and 14V bias GENERAL CHARACTERISTICS Operating temperature: -55C to +125C Storage temperature: -55C to +125C ESD voltage capability (tested per IEC 61000-4-2) o o Contact discharge mode: 8kV (typ), 15kV (max) Air discharge mode: 15kV (typ), 25kV (max) [1 pulse: per customer request] ESD pulse withstand: Typically 100 pulses (tested per IEC 61000-4-2, level 4, and contact method) Environmental Specifications Bias Humidity Bias Heat Thermal Shock Test Test Test Conditions Pass/Fail Criteria Bias Low Temp Test Solderability Solder Heat Vibration Mechanical Shock Solvent Resistance @ 85oC 10 to 50Hz, 1500G, -55oC to 125oC @ 125oC @ -55oC 250 oC +/- 5 oC @ 85% RH 60s cycle, 0.5ms, X-Y-Z IPA ultrasonic 30min dwell VDC (max) VDC (max) 3s +/- 1s 260 oC,10s VDC (max) 2hrs each in axis 3 300s 1000 cycles 1000 hours 1000 hours 1000 hours X-Y-Z axis times IL10A IL10A (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 IL10A IL10A 95% coverage 90% coverage No Physical Damage IL 10 A No Physical Damage IL 10 A No Physical Damage IL 10 A littelfuse.com PRODUCT: PESD0402-140 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27440 REV LETTER: H REV DATE: JULY 26, 2016 PAGE NO.: 3 OF 9 FIG 1: CAPACITANCE VS. FREQUENCY (TYPICAL SAMPLE) (PESD0402 Flat Response of Capacitance over Frequency Range) FIG 2: EYE DIAGRAM (TYPICAL SAMPLE) (PESD0402 Eye Diagram Performance at 3.4 GHz-- meets criteria for HDMI 1.3) (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 littelfuse.com PRODUCT: PESD0402-140 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27440 REV LETTER: H REV DATE: JULY 26, 2016 PAGE NO.: 4 OF 9 FIG 3: INSERTION LOSS DIAGRAM (TYPICAL SAMPLE) (PESD0402 Minimal Insertion Loss at 3.4 GHz) -0.25dB at 3.4GHz FIG 4: ESD PROTECTION FOR HDMI (PESD0402 Reference Layout and Test Results available) (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 littelfuse.com PRODUCT: PESD0402-140 ESD Protector DOCUMENT: SCD27440 REV LETTER: H REV DATE: JULY 26, 2016 PAGE NO.: 5 OF 9 Overvoltage Protection Device FIG 5: TYPICAL TRANSMISSION LINE PULSE RESPONSE GRAPH Typical TLP Clamping Voltage 300 250 Voltage ( V ) 200 150 100 50 0 0 10 20 30 40 50 60 70 80 90 100 Time (ns) (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 littelfuse.com PRODUCT: PESD0402-140 ESD Protector DOCUMENT: SCD27440 REV LETTER: H REV DATE: JULY 26, 2016 PAGE NO.: 6 OF 9 Overvoltage Protection Device DIMENSIONS D A B C mm in* Length A Min Max 0.90 1.10 (0.035) (0.043) Drawing Not To Scale Height B Terminal Width C Min Max Min Max 0.23 0.43 0.10 0.30 (0.009) (0.017) (0.004) (0.012) Width D Min Max 0.40 0.60 (0.016) (0.024) * Round off approximation RECOMMENDED LAND PATTERN: Solder thickness 0.15 to 0.2mm X W Y Z W Min 0.60 (0.024) X Max 0.70 (0.028) mm in* * Round off approximation (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 Min 0.30 (0.012) Y Max 0.40 (0.016) Min 0.80 (0.031) Z Max 0.90 (0.035) Min 2.10 (0.083) Max 2.20 (0.087) littelfuse.com PRODUCT: PESD0402-140 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27440 REV LETTER: H REV DATE: JULY 26, 2016 PAGE NO.: 7 OF 9 SOLDER REFLOW RECOMMENDATIONS: A Temperature ramp up 1 From ambient to Preheating temperature 30s to 60s B Preheating 140C - 160C 60s to 120s C Temperature ramp up 2 From Preheating to Main heating temperature 20s to 40s D Main heating E Cooling (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 at 200C at 220C at 240C at 260C From main heating temperature to 100C 60s ~ 70s 50s ~ 60s 30s ~ 40s 5s ~ 10s 4C/s (max) littelfuse.com PRODUCT: PESD0402-140 ESD Protector DOCUMENT: SCD27440 REV LETTER: H REV DATE: JULY 26, 2016 PAGE NO.: 8 OF 9 Overvoltage Protection Device PACKAGING Packaging Tape & Reel Standard Box PESD0402-140 10,000 50,000 EIA referenced Reel Dimensions for PESD Devices Reel Dimensions (mm): A 178.0 2.0 0402 Devices B 2.0 0.5 C 13.00.5 D 21.00.8 E 62.01.5 F 9.00.5 Carrier 0402 Devices G 13.01.0 Dimensions (mm): A B C D E F L W T1 8.000.30 3.500.05 1.750.10 2.000.05 4.000.10 1.500.10 1.130.03 0.630.03 0.480.03 Note 1: Carrier thickness Product Orientation - always face up (meaning the substrate is at the bottom), but parts do not have polarity mark. Leader & Trailer: The leader is 180mm in length & consists of empty cavities with sealed cover tape. The trailer is 350mm in length & consists of empty cavities with sealed cover tape. (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 littelfuse.com PRODUCT: PESD0402-140 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27440 REV LETTER: H REV DATE: JULY 26, 2016 PAGE NO.: 9 OF 9 POST REFLOW, CLEANING CONDITIONS A 5% saponifier combined with water during wash. For the ultrasonic process water temperature should be at 50C and board should be submerged for a minimum of one minute in the solutions, then rinse and dry. For in-line washing, the temperature of the water sprayed should be at 110C, rinse and drying is done inline. Warning: Application Limitations for PESD0402-140. This part is not intended to be used on power lines or for power bus applications. Users should independently evaluate the suitability of and test each product selected for their own applications Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, military, aerospace, medical, lifesaving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. (c) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 littelfuse.com