www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.026/02/13
Surface Mount Rectifier
Features:
• Low Cost
• Low Leakage
• Low Forward Voltage Drop
• High Current Capability
• Easily Cleaned With Alcohol,Isopropanol And Similar Solvents
Maximum Ratings and Electrical Characteristics:
Ratings at 25°C ambient temperature unless otherwise specied.
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load,derate by 20%.
Characteristics Symbol ES3BB-13-F ES3DB-13-F Units
Maximum recurrent peak reverse voltage VRRM 100 200 V
Maximum RMS voltage VRMS 70 140 V
Maximum DC blocking voltage VDC 100 200 V
Maximum average forward rectied current at TA=100°C IF(AV) 3 A
Peak forward surge current 8.3ms single half-sine-wave
superimposed on rated load at TJ=125°C IFSM 100 A
Maximum instantaneous forward voltage at 3A VF0.95 V
Maximum reverse current at TA=25°C
at rated DC blocking voltage at TA=125°C IR10
500 µA
Typical reverse recovery time (Note 1) trr 35 nS
Typical junction capacitance (Note 2) cj45 pF
Typical thermal resistance (Note 3) RθJA 40 °C/W
Operating / Storage junction temperature range TJ, TSTG -55 to +150 °C
Mechanical Data:
• Case : JEDEC DO-214AA, molded plastic
• Terminals : Solderable per MIL- STD-202, Method 208
• Polarity : Colour band denotes cathode
• Weight : 0.003oz, 0.093g
• Mounting position : Any
Note:
(1) Measured with IF=0.5A, IR=1A, Irr=0.25A.
(2) Measured at 1MHz and applied reverse voltage of 4V DC.
(3) Thermal resistance from junction to ambient and junction to lead PCB mounted on 0.27ʺ × 0.27ʺ ’(7 × 7mm2) copper pad areas.