SPECIFICATION * Supplier : Samsung electro-mechanics * Part Number : CL10C100BB8NNNC * Product : Multi-layer Ceramic Capacitor * Description : CAP, 10, 50V, 0.1, C0G, 0603 A. Samsung Part Number CL Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness 10 C 100 B B Samsung Multi-layer Ceramic Capacitor 0603 (inch code) L: 1.6 0.1 C0G 10 0.1 50 V 0.8 0.1 mm 8 N N mm N W: Inner electrode Termination Plating Product Special Packaging C 0.8 0.1 Ni Cu Sn 100% mm (Pb Free) Normal Reserved for future use Cardboard Type, 7" reel B. Samsung Reliablility Test and Judgement condition Capacitance Q Insulation Resistance Appearance Withstanding Voltage Temperature Characterisitcs Adhesive Strength of Termination Bending Strength Solderability Performance Within specified tolerance 600 min 10,000Mohm or 500Mohm Whichever is Smaller No abnormal exterior appearance No dielectric breakdown or mechanical breakdown C0G 110% Test condition 0.5~5Vrms Rated Voltage 60~120 sec. Microscope (x10) 300% of the rated voltage (From -55 to 125, Capacitance change shoud be within 30PPM/) No peeling shall be occur on the 500gF, for 101 sec. terminal electrode Capacitance change : Bending to the limit (1mm) with 1.0mm/sec. within 5% or 0.5 whichever is larger More than 95% of terminal surface 1) Sn63Pb37 solder is to be soldered newly 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat within 2.5% or 0.25 whichever is larger Tan , IR : initial spec. Solder pot : 2705, 101sec. Vibration Test Humidity Performance Capacitance change : within 2.5% or 0.25 whichever is larger Tan , IR : initial spec. Capacitance change : Test condition Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) 402, 90~95%RH, 500+12/-0hrs within 5% or 0.5 whichever is larger Q: 300 min IR : 1000Mohm or 50Mohm Whichever is Smaller Moisture Capacitance change : Resistance within 7.5% or 0.75 whichever is larger 402, 90~95%RH, 500+12/-0hrs Q: 133.33 min IR : 500Mohm or 25Mohm Whichever is Smaller Capacitance change : With 200% of the rated voltage High Temperature Resistance With rated voltage within 3% or 0.3 whichever is larger Q: 300 min IR : 1000Mohm or 50Mohm Whichever is Smaller Max. operating temperature 1000+48/-0hrs Temperature Capacitance change : 1 cycle condition Cycling 25 within 2.5% or 0.25 whichever is larger Min. operating temperatur Tan , IR : initial spec. Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 2505, 6sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.