1NIC COMPONENTS CORP. www.niccomp.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
EPOXY COATED, NON-INDUCTIVE, CAPACITORS,
REDUCED SIZE, RADIAL LEAD
FEATURES
• NON-INDUCTIVE CONSTRUCTION
• EPOXY RESIN COATED FOR EXCELLENT MOISTURE RESISTANCE
• METALLIZED CONTRUCTION PROVIDE SELF HEALING CHARACTERISTICS
• HIGH STABILITY WITH FREQUENCY OVER AN EXTENDED OPERATING LIFE
• HIGH PERFORMANCE AT LOW COST
• REDUCED SIZE
• LEAD FORMING AND CUT LEADS AVAILABLE
SPECIFICATIONS
STANDARD PRODUCTS AND CASE SIZE TABLE (mm)
Metallized Polyester Film Capacitors
S ± 1mm
*2mm max. L > 20mm
1.5mm max. L < 20mm
L max.
dφ
LL = 25mm min.
H max.
T max.
104 K 250 F2
Capacitance code in pF, rst two digits are
signicant, third digit is no. of zeros.
E.G. 102 = .001μF, 103 = .01μF, 104 = .1μF
Tolerance Code J = ±5%, K = ±10%
Voltage (VDC)
Special Lead Forming
PART NUMBER SYSTEM
NRM-S
Series
F
RoHS compliant
NRM-S Series
Operating Temperature -40°C ~ +85°C
Rated Voltage (VDC) 100V, 250V, 400V, 630V
Capacitance Range 0.01μF ~ 10μF
Capacitance Tolerance ±10% (K), ±5% (J)
Insulation Resistance C < 0.33μF IR > 9,000 Megohm
C > .33μF IR > 3,000 Megohm/μF
Dissipation Factor 1% (at 1KHz/25°C)
Dielectric Strength 150% of Rated Voltage for 5 Seconds
L13.0 18.0 26.0 31.0
S10.0 15.0 22.5 27.5
dφ0.6 0.8 0.8 0.8
Cap. (μF) 100VDC/63VAC 250VDC/160VAC 400VDC/200VAC 630VDC/220VAC
L T H L T H L T H L T H
0.01 ---------12.5 5.0 8.5
0.015 ---------12.5 5.5 8.5
0.022 ---------12.5 5.5 10.5
0.033 ---------12.5 6.5 11.0
0.047 ------12.5 5.5 8.5 12.5 7.5 12.0
0.068 ------12.5 6.0 10.0 18.5 6.5 11.5
0.1 ------12.5 7.0 11.0 18.5 7.0 13.5
0.15 ------18.5 5.5 12.0 18.5 8.0 16.0
0.22 ---12.5 8.5 10.5 18.5 6.5 13.0 18.5 9.5 17.5
0.33 ---12.5 7.0 12.0 18.5 7.5 14.0 26.0 11.0 19.5
0.47 ---18.5 6.0 12.5 18.5 8.5 16.5 26.0 10.5 19.0
0.68 12.5 8.5 13.0 18.5 7.0 13.5 26.0 7.5 17.0 26.0 12.0 22.0
1.0 12.5 9.5 15.0 18.5 8.0 16.0 26.0 8.5 18.5 31.0 13.5 22.0
1.5 18.0 9.5 14.0 18.5 9.5 17.5 31.0 9.5 19.0 31.0 18.5 25.0
2.2 18.5 10.0 16.5 26.0 9.0 17.5 31.0 11.5 21.5 31.0 20.0 29.0
3.3 18.5 12.0 19.0 26.0 11.0 19.5 ------
4.7 26.0 10.5 19.0 26.0 12.5 22.5 ------
6.8 26.0 13.0 21.5 31.0 14.0 22.5 ------
10.0 26.0 15.0 25.0 31.0 16.0 28.5 ------
*See Part Number System for Details
RoHS
Compliant
includes all homogeneous materials
LEAD SPACING (BULK) AND DIAMETER (mm)
SEE TAPING SPECIFICATIONS FOR LEAD-SPACING FOR
TAPE & BOX PACKAGED
2NIC COMPONENTS CORP. www.niccomp.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Radial Lead Taping Specications Film Capacitors
TAPE & REEL FOR RADIAL LEAD CAPACITOR
REFER TO EIA STANDARD RS-468
*NOTE: STANDARD LEAD SPACING
ON TAPED PARTS IS 5MM. SPECIAL
7.5MM, 10MM AND 15MM LEAD SPACING
MAY BE AVAILABLE UPON SPECIAL
REQUEST.
TO SPECIFIC:
LEAD SPACING P/N SUFFIX
5MM TB
7.5MM TB (7.5MMLS)
10MM TB (10MMLS)
AMMO BOX PACKING TB (TAPE BOX)
CRIMPED LEAD TAPING (STANDARD) STRAIGHT LEAD TAPING (SPECIAL) Contact NIC for Availability*.
D0
I0
I
D0
I0
W0
W1
W2
L
W
H0
H1
P0
P
P2
P1F
W0
W1
W2
L
W
H2
P0
P
P2
P1
F
B max.
Δh
t
C
B
A
Dimensions MM (inch)
P
P0
P2
P1
F*
Δh
W
W1
H1
H2
H0
I
I0
φD0
W0
t
W2
L
12.7 ± 1.0
12.7 ± 0.2
6.35 ± 1.3
3.85 ± 0.5
5.0 ± 0.8
0 ± 2.0
18.0 ± 0.5
9.0 ± 0.5
20.0 ± 0.75
18.0 ± 0.5
16.0 ± 0.5
2.0 max.
7.0 max.
4.0 ± 0.2
12.5 min.
0.7 ± 0.2
3.0 max.
11.0 max.
(0.5 ± 0.0394)
(0.5 ± 0.008)
(.025 ± 0.051)
(0.152 ± 0.020)
(0.197 ± 0.0315)
(0 ± 0.0787)
(0.709 ± 0.020)
(0.354 ± 0.020)
(0.787 ± 0.030)
(0.709 ± 0.020)
(0.630 ± 0.020)
(0.079 max.)
(0.276 max.)
(0.157 ± 0.008)
(0.492 min.)
(0.028 ± 0.008)
(0.118 max.)
(0.433 max.)
