© 2000 IXYS All rights reserved 1 - 2
Phaseleg Configuration
High dv/dt, Low trr, HDMOSTM Family
Symbol Conditions Maximum Ratings
VDSS TJ= 25°C to 150°C 300 V
VDGR TJ= 25°C to 150°C; RGS = 10 kW300 V
VGS Continuous ±20 V
VGSM Transient ±30 V
ID25 TC= 25°C 290 A
ID80 TC= 80°C 220 A
IDM TC= 25°C; tp = 10 µs
1160 A
PDTC= 25°C 1500 W
TJ-40 ...+150 °C
TJM 150 °C
Tstg -40 ... +125 °C
VISOL 50/60 Hz t = 1 min 3000 V~
IISOL £ 1 mA t = 1 s 3600
MdMounting torque (M6) 2.25-2.75/20-25 Nm/lb.in.
Terminal connection torque (M5) 2.5-3.7/22-33 Nm/lb.in.
Weight typical including screws 250 g
Symbol Conditions Characteristic Values
(TJ = 25°C, unless otherwise specified)
min. typ. max.
VDSS VGS = 0 V, ID = 12 mA 300 V
VGS(th) VDS = 20 V, ID = 30 mA 2 4 V
IGSS VGS = ±20 V DC, VDS = 0 ±500 nA
IDSS VDS = VDSS TJ = 25°C 0.5 mA
VGS = 0 V TJ = 125°C8mA
RDS(on) VGS = 10 V, ID = 0.5 • ID25 7.4 8.6 mW
Pulse test, t £ 300 ms, duty cycle d £ 2 %
Features
●Low RDS(on) HDMOSTM process
●International standard package
●Low package inductance for high
speed switching
●Kelvin Source contact for easy drive
●Direct Copper Bonded Al2O3 ceramic
base plate
Applications
●AC motor speed control for electric
vehicles
●DC servo and robot drives
●Switched-mode and resonant-mode
power supplies
●DC choppers
Advantages
●Easy to mount
●Space and weight savings
●High power density
●Low losses
Additional current limitation by external leads
Dual Power
HiPerFETTM Module
11
8
2
1
3
10
9
VDSS = 300 V
ID25 = 290 A
RDS(on) typ. = 7.4 mW
VMM 300-03F
8
9
2311
10
1
Advanced Technical Information
031
IXYS reserves the right to change limits, test conditions and dimensions.
http://store.iiic.cc/
© 2000 IXYS All rights reserved 2 - 2
Symbol Conditions Characteristic Values
(TJ = 25°C, unless otherwise specified)
min. typ. max.
gfs VDS = 10 V; ID = 0.5 • ID25 pulsed 280 S
Ciss 40 nF
Coss VGS = 0 V, VDS = 25 V, f = 1 MHz 7.2 nF
Crss 2.8 nF
td(on) 200 ns
trVGS = 10 V, VDS = 0.5 • VDSS, ID = 0.5 • ID25 400 ns
td(off) RG = 1 W400 ns
tf150 ns
Qg1440 nC
Qgs VGS = 10 V, VDS = 150 V, ID = 150 A 240 nC
Qgd 720 nC
RthJC 0.08 K/W
RthJS with heat transfer paste 0.12 K/W
Source-Drain Diode Characteristic Values
(TJ = 25°C, unless otherwise specified)
Symbol Conditions min. typ. max.
ISVGS = 0 V, TC = 25°C, TJ = TJM 290 A
ISM
1160 A
VSD IF = 300 A, VGS = 0 V, 0.9 1.1 V
Pulse test, t £ 300 ms, duty cycle d £ 2 %
trr IF = 300 A, -di/dt = 400 A/ms, VDS = 0.5 • VDSS 300 ns
Additional current limitation by external leads
VMM 300-03F
Dimensions in mm (1 mm = 0.0394")
http://store.iiic.cc/
