18
1 - CHARACTERISTICS
Mechanical
■Endurance: 500 matings
Insertion and extraction forces, max:
- shell size 1: 120 N (27 Ibs)
- shell size 2: 267 N (60 Ibs)
- shell size 3: 467 N (105 Ibs)
■Vibration:
8 hours in each axis
Random vibration at 16,4 g from 50 to 2000 Hz
(MIL-STD-1344 A method 2005-1).
■Dynamic shock:
3 impacts of 50 g in all axis, duration 11 µs (half-wave) to
MIL-STD-202 method 213
Electrical
■Dielectric withstanding voltage
■Insulation resistance: ≥5000 MΩ
■Current ratings, continuous:
* measured over a conductor length of 150 mm
■Triaxal contact size 8
bandwidth: 0-20 MHz
■Voltage rating:
500 Vac Max - 125 Vac at 21000 m
■Voltage drop:
Inner and middle contact ≤55 mV under 1 A
outer contact ≤5 mV under 12 A
Environmental
■Temperature rating:
– 65° C to +125° C for both classes, sealed and unsealed
■Fluid resistance:
Hydraulic to MIL-H-5606
Lubricating to MIL-L-23699
Isopropyl alcohol
■Resistance to salt spray: 48 hours
(MIL-STD-202 method 101 or
MIL-STD-1344 method 1001)
Mated Unmated
Sea level 1500 Vrms 1500 Vrms
15 000 m 500 Vrms 500 Vrms
for Quadrax and ELIO™ 8
Arinc 600 Range
Contact Wire
Current Voltage
gauge gauge (A) drop
max (mV)*
22 5 40
22 24 3 30
26 2 25
20 7.5 55
20 22 5 40
24 3 30
16 16 13 50
12 12 23 45
Material Finish
Aluminum Alodine 1200
alloy to passivation to
Shells QQ-A-591 MIL-C-5541
Classe 1
Inserts Thermoset,
Thermoplastic,
Metal
Seals and Fluorinated
Grommets silicone to
MIL-R-25988
Contacts Copper alloy Gold (plated to
to QQ-B-626 MIL-G-45204)
over nickel
(to QQ-N-290)
for Quadrax and ELIO™ 8
Arinc 600 Range
19
2 - INSERT ARRANGEMENTS
STANDARD INSERTS
I-Q10 I-Q11 I-C12Q6 II-Q6 II-11Q2 II-68Q2
I-118Q2 I-47Q2 II-62Q2 II-20Q4
PLEASE CONSULT US
STANDARD
INSERTS
PLEASE
CONSULT US
Contact Layouts
Insert ARINC 600 Receptacle Plug Number of cavities
name cavity contact release contact release # 22 # 20 # 16 # 12 # 8 "Quadrax" type
I-Q11 A,B,D,E Front/Rear Rear 11*
I-C12Q6 A,B,D,E Rear Rear 12* 6*
II-68Q2 C,F Front Rear 68 2*
II-Q6 C,F Front/Rear Rear 6*
II-11Q2 C,F Rear Rear 4 3 4 2*
I-Q10 A,B,D,E Front/Rear Rear 10*
I-47Q2 A,B,D,E Rear Rear 47 2*
I-118Q2 A,B,D,E Rear Rear 118 2*
II-62Q2** C,F Rear Rear 60 2 2*
II-20Q4 C,F Rear Rear 20 4*
* grounded cavities: contact to shell conductivity < 10 mΩ
** not intermariable with II-62Q2 insert from ARINC 600 sup 14 specification
Arinc 600
Range
20
3 - DIMENSIONS WITH QUADRAX CONTACTS
for Quadrax and ELIO™ 8
Arinc 600 Range
Dimensions in millimeters
PLUG RECEPTACLE
for Quadrax and ELIO™ 8
Arinc 600 Range
21
4 - DIMENSIONS WITH ELIO™ 8 ADAPTOR AND ELIO™ TERMINI
Arinc 600 receptacle with ELIO™ 8 adaptor and ELIO™ termini
Arinc 600
Range
Arinc 600 plug with ELIO™ 8 adaptor and ELIO™ termini
Dimensions in millimeters
22
5 - ORDERING INFORMATION
P/N: SB612MG13Q1PQA01AQ
Delivered with signal and Quadrax contacts
P/N: SB612FK13Q1SQA01AQ
Delivered with mounted PC tail signal and Quadrax contacts
P/N: SB612MG13Q1P0001AQ
Delivered with signal and Quadrax contacts
P/N: SB612FK13Q1S0001AQ
Delivered with mounted PC tail signal and Quadrax contacts
To get the part number of any other arrangement, please consult us
for Quadrax and ELIO™ 8
Arinc 600 Range
CAVITY A
I-Q11
FRONT RELEASE
CAVITY B
I-Q11
FRONT RELEASE
CAVITY C
II-68Q2
FRONT RELEASE
CAVITY A
I-150 PTS
FRONT RELEASE
CAVITY B
I-150 PTS
FRONT RELEASE
CAVITY C
II-68Q2
FRONT RELEASE
CAVITY A
I-Q11
REAR RELEASE
CAVITY B
I-Q11
REAR RELEASE
CAVITY C
II-68Q2
REAR RELEASE
CAVITY A
I-150 PTS
REAR RELEASE
CAVITY B
I-150 PTS
REAR RELEASE
CAVITY C
II-68Q2
REAR RELEASE
23
1 - CHARACTERISTICS
■Standard ARINC 600 shell
■Compatible with ELIO
TM
contact termini
■Rackable connector - 500 mating / unmating cycles
■Environmental performance as per EN 2591 and MIL-STD-1344
■Temperature range: -65° C, +150° C
Mechanical
■Shell: aluminum alloy to QQ-A-591
■Endurance: 500 mating / unmating operations
■Shocks: 300 g, 3 ms as per
EN 2591-6402 method A and
MIL-STD-1344
■Vibrations:
random 50 to 2000 Hz, 3 x 8 hours,
0.2 g
2
/Hz, 16.4 g, as per MIL-STD-
1344 A method 2005-1 and EN 2591
■Contact retention: minimum 11 daN
Environmental
■Salt spray: 48 hours
■Temperature range: -65° C, +125° C long term (1000 hours),
+150° C short term (100 hours)
■Damp heat: 10 cycles of 24 hours in accordance with
EN 2591-321 and MIL-STD-1344
■Fire resistant: 30 seconds fire exposure as per
EN 2591-317 and MIL-STD-1344
Resistance to fluids
■Hydraulic: MIL-H-5606
■Lubricating: MIL-L-23699
■Isopropyl alcohol
Optical
■Compatible with ELIO
TM
termini
■Typical Insertion Loss
- Singlemode: 0.3 dB @ 1300 nm
- Multimode: 0.2 dB @ 1300 nm
■Typical Return Loss
- Singlemode: -30 dB @ 1300 nm
- Multimode: -30 dB @ 1300 nm
■Maximum IL during and after climatic tests:
0.7 dB @ 1300 nm and 850 nm for multimode 62.2/125 fiber
for ELIO™ Termini: ELIO™ 600
Arinc 600 Range
Arinc 600
Range
24
2 - INSERTS PROPOSAL
for ELIO™ Termini: ELIO™ 600
Arinc 600 Range
22 optical ways 16 optical ways 14 optical ways
Shell size 2 Shell size 2 Shell size 2
10 optical ways 6 optical ways
Shell size 1 Shell size 1
ARINC 600 receptacle
3 - DIMENSIONS
ARINC 600 plug
Dimensions in millimeters
