LM339AN - Texas Instruments High-Performance Analog

1OUT

2OUT

VCC

2IN-

2IN+

1IN-

1IN+

OUT3

OUT4

GND

4IN+

4IN-

3IN+

3IN-

LM139, LM139A . . . D, J, OR W PACKAGE

LM239 . . . D, N, OR PW PACKAGE

LM239A . . . D PACKAGE

LM339, LM339A . . . D, DB, N, NS, OR PW PACKAGE

LM2901 . . . D, N, NS, OR PW PACKAGE

(TOP VIEW)

3 2 1 20 19

9 10 11 12 13

GND

4IN+

4IN-

VCC

2IN-

2IN+

2OUT

1OUT

3IN-

3IN+

3OUT

4OUT

1IN-

1IN+

LM139, LM139A . . . FK PACKAGE

(TOP VIEW)

NC - No inter nal connection

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

www.ti.com

SLCS006S –OCTOBER 1979–REVISED AUGUST 2012

QUAD DIFFERENTIAL COMPARATORS

Check for Samples: LM139,LM239,LM339,LM139A,LM239A,LM339A,LM2901,LM2901AV,LM2901V

1FEATURES

• Wide Supply Ranges • Low Input Bias Current: 25 nA (Typ)

– Single Supply: 2 V to 36 V • Low Input Offset Current: 3 nA (Typ) (LM139)

(Tested to 30 V for Non-V Devices and 32 V • Low Input Offset Voltage: 2 mV (Typ)

for V-Suffix Devices) • Common-Mode Input Voltage Range Includes

– Dual Supplies: ±1 V to ±18 V Ground

(Tested to ±15 V for Non-V Devices and • Differential Input Voltage Range Equal to

±16 V for V-Suffix Devices) Maximum-Rated Supply Voltage: ±36 V

• Low Supply-Current Drain Independent of • Low Output Saturation Voltage

Supply Voltage: 0.8 mA (Typ) • Output Compatible With TTL, MOS, and CMOS

DESCRIPTION/ORDERING INFORMATION

These devices consist of four independent voltage comparators that are designed to operate from a single power

supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference

between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode

voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-

collector outputs to achieve wired-AND relationships.

The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C to

125°C. The LM239 and LM239A are characterized for operation from –25°C to 125°C. The LM339 and LM339A

are characterized for operation from 0°C to 70°C. The LM2901, LM2901AV, and LM2901V are characterized for

operation from –40°C to 125°C.

1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Products conform to specifications per the terms of the Texas On products compliant to MIL-PRF-38535, all parameters are

Instruments standard warranty. Production processing does not tested unless otherwise noted. On all other products, production

necessarily include testing of all parameters. processing does not necessarily include testing of all parameters.

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S –OCTOBER 1979–REVISED AUGUST 2012

www.ti.com

Table 1. ORDERING INFORMATION(1)

VIOmax ORDERABLE TOP-SIDE

TAMAX VCC PACKAGE(2)

AT 25°C PART NUMBER MARKING

PDIP – N Tube of 25 LM339N LM339N

Tube of 50 LM339D

SOIC – D LM339DR LM339

Reel of 2500 LM339DRG3

5 mV 30 V SOP – NS Reel of 2000 LM339NSR LM339

SSOP – DB Reel of 2000 LM339DBR LM339

Tube of 90 LM339PW

TSSOP – PW L339

0°C to 70°C Reel of 2000 LM339PWRG3

PDIP – N Tube of 25 LM339AN LM339AN

Tube of 50 LM339AD

SOIC – D LM339A

Reel of 2500 LM339ADR

2 mV 30 V SOP – NS Reel of 2000 LM339ANSR LM339A

SSOP – DB Reel of 2000 LM339ADBR L339A

Tube of 90 LM339APW

TSSOP – PW L339A

Reel of 2000 LM339APWR

PDIP – N Tube of 25 LM239N LM239N

Tube of 50 LM239D

SOIC – D LM239DR LM239

5 mV 30 V Reel of 2500 LM239DRG3

–25°C to 85°C Tube of 90 LM239PW

TSSOP – PW L239

Reel of 2000 LM239PWR

Tube of 50 LM239AD

2 mV 30 V SOIC – D LM239A

Reel of 2500 LM239ADR

PDIP – N Tube of 25 LM2901N LM2901N

Tube of 50 LM2901D

SOIC – D LM2901DR LM2901

Reel of 2500

7 mV 30 V LM2901DRG3

SOP – NS Reel of 2000 LM2901NSR LM2901

–40°C to 125°C Tube of 90 LM2901PW

TSSOP – PW L2901

Reel of 2000 LM2901PWRG3

SOIC – D Reel of 2500 LM2901VQDR L2901V

7 mV 32 V TSSOP – PW Reel of 2000 LM2901VQPWR L2901V

SOIC – D Reel of 2500 LM2901AVQDR L2901AV

2 mV 32 V TSSOP – PW Reel of 2000 LM2901AVQPWR L2901AV

CFP – W Tube of 25 LM139W LM139W

CDIP – J Tube of 25 LM139J LM139J

5 mV 30 V LCCC – FK Tube of 55 LM139FK LM139FK

Tube of 50 LM139D

SOIC – D LM139

Reel of 2500 LM139DR

–55°C to 125°C CFP – W Tube of 25 LM139AW LM139AW

CDIP – J Tube of 25 LM139AJ LM139AJ

2 mV 30 V LCCC – FK Tube of 55 LM139AFK LM139AFK

Tube of 50 LM139AD

SOIC – D LM139AD

Reel of 2500 LM139ADR

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

80-µA

Current

Regulator

80 µA

GND

OUT

VCC

10 µA

60 µA

10 µA

IN+

IN−

All current values shown are nominal.

OUT

IN−

IN+

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

www.ti.com

SLCS006S –OCTOBER 1979–REVISED AUGUST 2012

SYMBOL (EACH COMPARATOR)

SCHEMATIC (EACH COMPARATOR)

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S –OCTOBER 1979–REVISED AUGUST 2012

www.ti.com

ABSOLUTE MAXIMUM RATINGS(1)

over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT

VCC Supply voltage(2) 36 V

VID Differential input voltage(3) ±36 V

VIInput voltage range (either input) –0.3 36 V

VOOutput voltage 36 V

IOOutput current 20 mA

Duration of output short circuit to ground(4) Unlimited

D package 86

DB package 96

θJA Package thermal impedance, junction to free air(5) (6) N package 80 °C/W

NS package 76

PW package 113

FK package 5.61

θJC Package thermal impedance, junction to case(7) (8) J package 15.05 °C/W

W package 14.65

TJOperating virtual-junction temperature 150 °C

Case temperature for 60 s FK package 260 °C

Lead temperature 1,6 mm (1/16 in) from case for 60 s J package 300 °C

Tstg Storage temperature range –65 150 °C

(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) All voltage values, except differential voltages, are with respect to network ground.

(3) Differential voltages are at IN+ with respect to IN–.

(4) Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

(5) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD= (TJ(max) – TA)/θJA. Operating at the absolute maximum TJof 150°C can affect reliability.

(6) The package thermal impedance is calculated in accordance with JESD 51-7.

(7) Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case

temperature is PD= (TJ(max) – TC)/θJC. Operating at the absolute maximum TJof 150°C can affect reliability.

(8) The package thermal impedance is calculated in accordance with MIL-STD-883.

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

www.ti.com

SLCS006S –OCTOBER 1979–REVISED AUGUST 2012

ELECTRICAL CHARACTERISTICS

at specified free-air temperature, VCC = 5 V (unless otherwise noted) LM139 LM139A

PARAMETER TEST CONDITIONS(1) TA(2) UNIT

MIN TYP MAX MIN TYP MAX

VCC = 5 V to 30 V, 25°C 2 5 1 2

VIO Input offset voltage VIC = VICR min, mV

Full range 9 4

VO= 1.4 V 25°C 3 25 3 25

IIO Input offset current VO= 1.4 V nA

Full range 100 100

25°C –25 –100 –25 –100

IIB Input bias current VO= 1.4 V nA

Full range –300 –300

0 to 0 to

25°C VCC – 1.5 VCC – 1.5

Common-mode input-

VICR V

voltage range(3) 0 to 0 to

Full range VCC – 2 VCC – 2

Large-signal differential- VCC+ = ±7.5 V,

AVD 25°C 200 50 200 V/mV

voltage amplification VO= –5 V to 5 V

VOH = 5 V 25°C 0.1 0.1 nA

IOH High-level output current VID = 1 V VOH = 30 V Full range 1 1 μA

25°C 150 400 150 400

VOL Low-level output voltage VID = –1 V, IOL = 4 mA mV

Full range 700 700

IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 6 16 mA

Supply current

ICC VO= 2.5 V, No load 25°C 0.8 2 0.8 2 mA

(four comparators)

(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(2) Full range (MIN to MAX) for LM139 and LM139A is –55°C to 125°C. All characteristics are measured with zero common-mode input

voltage, unless otherwise specified.

(3) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-

mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long

as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.

SWITCHING CHARACTERISTICS

VCC = 5 V, TA= 25°C LM139

LM139A

PARAMETER TEST CONDITIONS UNIT

TYP

100-mV input step with 5-mV overdrive 1.3

RLconnected to 5 V through 5.1 kΩ,

Response time μs

CL= 15 pF(1) (2) TTL-level input step 0.3

(1) CLincludes probe and jig capacitance.

(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S –OCTOBER 1979–REVISED AUGUST 2012

www.ti.com

ELECTRICAL CHARACTERISTICS

at specified free-air temperature, VCC = 5 V (unless otherwise noted) LM239 LM239A

LM339 LM339A

PARAMETER TEST CONDITIONS(1) TA(2) UNIT

MIN TYP MAX MIN TYP MAX

VCC = 5 V to 30 V, 25°C 2 5 1 3

VIO Input offset voltage VIC = VICR min, mV

Full range 9 4

VO= 1.4 V 25°C 5 50 5 50

IIO Input offset current VO= 1.4 V nA

Full range 150 150

25°C –25 –250 –25 –250

IIB Input bias current VO= 1.4 V nA

Full range –400 –400

0 to 0 to

25°C VCC – 1.5 VCC – 1.5

Common-mode input-

VICR V

voltage range(3) 0 to 0 to

Full range VCC – 2 VCC – 2

VCC = 15 V,

Large-signal differential-

AVD VO= 1.4 V to 11.4 V, 25°C 50 200 50 200 V/mV

voltage amplification RL≥15 kΩto VCC

VOH = 5 V 25°C 0.1 50 0.1 50 nA

IOH High-level output current VID = 1 V VOH = 30 V Full range 1 1 μA

25°C 150 400 150 400

VOL Low-level output voltage VID = –1 V, IOL = 4 mA mV

Full range 700 700

IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 6 16 mA

Supply current

ICC VO= 2.5 V, No load 25°C 0.8 2 0.8 2 mA

(four comparators)

(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(2) Full range (MIN to MAX) for LM239/LM239A is –25°C to 85°C, and for LM339/LM339A is 0°C to 70°C. All characteristics are measured

with zero common-mode input voltage, unless otherwise specified.

(3) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-

mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long

as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.

SWITCHING CHARACTERISTICS

VCC = 5 V, TA= 25°C LM239

LM239A

LM339

PARAMETER TEST CONDITIONS UNIT

LM339A

TYP

100-mV input step with 5-mV overdrive 1.3

RLconnected to 5 V through 5.1 kΩ,

Response time μs

CL= 15 pF(1) (2) TTL-level input step 0.3

(1) CLincludes probe and jig capacitance.

(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

www.ti.com

SLCS006S –OCTOBER 1979–REVISED AUGUST 2012

ELECTRICAL CHARACTERISTICS

at specified free-air temperature, VCC = 5 V (unless otherwise noted) LM2901

PARAMETER TEST CONDITIONS(1) TA(2) UNIT

MIN TYP MAX

25°C 2 7

Non-A devices

VIC = VICR min, Full range 15

VIO Input offset voltage VO= 1.4 V, mV

25°C 1 2

VCC = 5 V to MAX(3) A-suffix devices Full range 4

25°C 5 50

IIO Input offset current VO= 1.4 V nA

Full range 200

25°C –25 –250

IIB Input bias current VO= 1.4 V nA

Full range –500

0 to

25°C VCC – 1.5

Common-mode input-

VICR V

voltage range(4) 0 to

Full range VCC – 2

Large-signal differential- VCC = 15 V, VO= 1.4 V to 11.4 V,

AVD 25°C 25 100 V/mV

voltage amplification RL≥15 kΩto VCC VOH = 5 V 25°C 0.1 50 nA

IOH High-level output current VID = 1 V VOH = VCC MAX(3) Full range 1 μA

Non-V devices 150 500

25°C

VID = –1 V,

VOL Low-level output voltage V-suffix devices 150 400 mV

IOL = 4 mA All devices Full range 700

IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 mA

VCC = 5 V 0.8 2

Supply current VO= 2.5 V,

ICC 25°C mA

(four comparators) No load VCC = MAX(3) 1 2.5

(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(2) Full range (MIN to MAX) for LM2901 is –40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless

otherwise specified.

(3) VCC MAX = 30 V for non-V devices, and 32 V for V-suffix devices

(4) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-

mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long

as the other input remains in the common-mode range. Either or both inputs can go to VCC MAX without damage.

SWITCHING CHARACTERISTICS

VCC = 5 V, TA= 25°C LM2901

PARAMETER TEST CONDITIONS UNIT

TYP

100-mV input step with 5-mV overdrive 1.3

RLconnected to 5 V through 5.1 kΩ,

Response time μs

CL= 15 pF(1) (2) TTL-level input step 0.3

(1) CLincludes probe and jig capacitance.

(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

0.001

0.01

0.1

0.01 0.1 1 10 100

IO– Output Sink Current – mA

VO– Saturation Voltage – V

T = –55°C

T = 25°C

T = 125°C

0.2

0.4

0.6

0.8

1.2

1.4

1.6

1.8

0 5 10 15 20 25 30 35

VCC – Supply Voltage – V

ICC – Supply Current – mA

T = –55°C

T = 0°C

T = 25°C

T = 70°C

T = 125°C

0 5 10 15 20 25 30 35

VCC – Supply Voltage – V

IIN – Input Bias Current – nA

T = –55°C

T = 0°C

T = 25°C

T = 70°C

T = 125°C

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S –OCTOBER 1979–REVISED AUGUST 2012

www.ti.com

TYPICAL CHARACTERISTICS

SUPPLY CURRENT INPUT BIAS CURRENT

vs vs

SUPPLY VOLTAGE SUPPLY VOLTAGE

OUTPUT SATURATION VOLTAGE

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

-1

-0.3 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25

t – Time – µs

VO– Output Voltage – V

Overdrive = 5 mV

Overdrive = 100 mV

Overdrive = 20 mV

-1

-0.3 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25

t – Time – µs

VO– Output Voltage – V

Overdrive = 5 mV

Overdrive = 100 mV

Overdrive = 20 mV

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

www.ti.com

SLCS006S –OCTOBER 1979–REVISED AUGUST 2012

TYPICAL CHARACTERISTICS (continued)

RESPONSE TIME FOR VARIOUS OVERDRIVES RESPONSE TIME FOR VARIOUS OVERDRIVES

NEGATIVE TRANSITION POSITIVE TRANSITION

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S –OCTOBER 1979–REVISED AUGUST 2012

www.ti.com

REVISION HISTORY

Changes from Revision R (July 2010) to Revision S Page

• Updated ORDERING INFORMATION table. ........................................................................................................................ 2

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2013

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

5962-7700801VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-7700801VC

LM139JQMLV

5962-87739012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-

87739012A

LM139AFKB

5962-8773901CA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8773901CA

LM139AJB

5962-8773901DA ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8773901DA

LM139AWB

5962-9673802V9B ACTIVE XCEPT KGD 0 100 TBD Call TI N / A for Pkg Type -55 to 125

5962-9673802VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9673802VC

LM139AJQMLV

77008012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77008012A

LM139FKB

7700801CA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 7700801CA

LM139JB

7700801DA ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 7700801DA

LM139WB

JM38510/11201BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510

/11201BCA

LM139AD ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A

LM139ADG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A

LM139ADR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A

LM139ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A

LM139AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-

87739012A

LM139AFKB

LM139AJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM139AJ

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2013

Addendum-Page 2

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

LM139AJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8773901CA

LM139AJB

LM139AN OBSOLETE PDIP N 14 TBD Call TI Call TI -55 to 125

LM139AW ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM139AW

LM139AWB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8773901DA

LM139AWB

LM139D ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139

LM139DG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139

LM139DR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139

LM139DRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139

LM139FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 LM139FK

LM139FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77008012A

LM139FKB

LM139J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM139J

LM139JB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 7700801CA

LM139JB

LM139N OBSOLETE PDIP N 14 TBD Call TI Call TI -55 to 125

LM139W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM139W

LM139WB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 7700801DA

LM139WB

LM239AD ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A

LM239ADE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A

LM239ADG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A

LM239ADR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2013

Addendum-Page 3

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

LM239ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A

LM239ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A

LM239AN OBSOLETE PDIP N 14 TBD Call TI Call TI -25 to 85

LM239D ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239

LM239DE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239

LM239DG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239

LM239DR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM -25 to 85 LM239

LM239DRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239

LM239DRG3 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU SN Level-1-260C-UNLIM -25 to 85 LM239

LM239DRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239

LM239N ACTIVE PDIP N 14 25 Pb-Free

(RoHS) CU NIPDAU N / A for Pkg Type -25 to 85 LM239N

LM239NE4 ACTIVE PDIP N 14 25 Pb-Free

(RoHS) CU NIPDAU N / A for Pkg Type -25 to 85 LM239N

LM239PW ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 L239

LM239PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 L239

LM239PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 L239

LM239PWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 L239

LM239PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 L239

LM239PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 L239

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2013

Addendum-Page 4

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

LM2901AVQDR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV

LM2901AVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV

LM2901AVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV

LM2901AVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV

LM2901D ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901

LM2901DE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901

LM2901DG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901

LM2901DR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 LM2901

LM2901DRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901

LM2901DRG3 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 LM2901

LM2901DRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901

LM2901N ACTIVE PDIP N 14 25 Pb-Free

(RoHS) CU NIPDAU N / A for Pkg Type -40 to 125 LM2901N

LM2901NE4 ACTIVE PDIP N 14 25 Pb-Free

(RoHS) CU NIPDAU N / A for Pkg Type -40 to 125 LM2901N

LM2901NSR ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901

LM2901NSRE4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901

LM2901NSRG4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901

LM2901PW ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901

LM2901PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2013

Addendum-Page 5

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

LM2901PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901

LM2901PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 125

LM2901PWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 L2901

LM2901PWRE4 ACTIVE TSSOP PW 14 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901

LM2901PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 L2901

LM2901PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901

LM2901QD OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 125

LM2901QN OBSOLETE PDIP N 14 TBD Call TI Call TI -40 to 125

LM2901VQDR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V

LM2901VQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V

LM2901VQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V

LM2901VQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V

LM339AD ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A

LM339ADBR ACTIVE SSOP DB 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A

LM339ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A

LM339ADE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A

LM339ADG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A

LM339ADR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 LM339A

LM339ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2013

Addendum-Page 6

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

LM339ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A

LM339AN ACTIVE PDIP N 14 25 Pb-Free

(RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 LM339AN

LM339ANE4 ACTIVE PDIP N 14 25 Pb-Free

(RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 LM339AN

LM339ANSR ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A

LM339ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A

LM339APW ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A

LM339APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A

LM339APWG4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A

LM339APWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A

LM339APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A

LM339APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A

LM339D ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339

LM339DBLE OBSOLETE SSOP DB 14 TBD Call TI Call TI 0 to 70

LM339DBR ACTIVE SSOP DB 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339

LM339DBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339

LM339DBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339

LM339DE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339

LM339DG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2013

Addendum-Page 7

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

LM339DR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 LM339

LM339DRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339

LM339DRG3 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 LM339

LM339DRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339

LM339N ACTIVE PDIP N 14 25 Pb-Free

(RoHS) CU NIPDAU | CU SN N / A for Pkg Type 0 to 70 LM339N

LM339NE3 ACTIVE PDIP N 14 25 Pb-Free

(RoHS) CU SN N / A for Pkg Type 0 to 70 LM339N

LM339NE4 ACTIVE PDIP N 14 25 Pb-Free

(RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 LM339N

LM339NSLE OBSOLETE SO NS 14 TBD Call TI Call TI 0 to 70

LM339NSR ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339

LM339NSRG4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339

LM339PW ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339

LM339PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339

LM339PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339

LM339PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI 0 to 70

LM339PWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 L339

LM339PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339

LM339PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 L339

LM339PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339

LM339Y OBSOLETE 0 TBD Call TI Call TI 0 to 70

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2013

Addendum-Page 8

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

M38510/11201BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510

/11201BCA

(1) The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability

information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that

lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between

the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight

in homogeneous material)

(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation

of the previous line and the two combined represent the entire Device Marking for that device.

(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish

value exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information

provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and

continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

OTHER QUALIFIED VERSIONS OF LM139, LM139-SP, LM239A, LM2901, LM2901AV, LM2901V :

PACKAGE OPTION ADDENDUM

www.ti.com 18-Oct-2013

Addendum-Page 9

•Catalog: LM139

•Automotive: LM239A-Q1, LM2901-Q1, LM2901AV-Q1, LM2901V-Q1

•Enhanced Product: LM239A-EP

•Space: LM139-SP

NOTE: Qualified Version Definitions:

•Catalog - TI's standard catalog product

•Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects

•Enhanced Product - Supports Defense, Aerospace and Medical Applications

•Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

LM139ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM139DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM239ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM239DR SOIC D 14 2500 330.0 16.8 6.5 9.5 2.3 8.0 16.0 Q1

LM239DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM239DRG3 SOIC D 14 2500 330.0 16.8 6.5 9.5 2.3 8.0 16.0 Q1

LM239DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM239PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM2901AVQPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM2901AVQPWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM2901DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM2901DRG3 SOIC D 14 2500 330.0 16.8 6.5 9.5 2.3 8.0 16.0 Q1

LM2901DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM2901NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1

LM2901PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

PACKAGE MATERIALS INFORMATION

www.ti.com 23-Oct-2013

Pack Materials-Page 1

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

LM2901PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1

LM2901PWRG3 TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1

LM2901PWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM2901VQPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM2901VQPWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM339ADBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1

LM339ADR SOIC D 14 2500 330.0 16.8 6.5 9.5 2.3 8.0 16.0 Q1

LM339ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM339ADRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM339ANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1

LM339APWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM339DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM339DRG3 SOIC D 14 2500 330.0 16.8 6.5 9.5 2.3 8.0 16.0 Q1

LM339DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM339PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM339PWRG3 TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1

LM339PWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

*All dimensions are nominal

PACKAGE MATERIALS INFORMATION

www.ti.com 23-Oct-2013

Pack Materials-Page 2

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

LM139ADR SOIC D 14 2500 367.0 367.0 38.0

LM139DR SOIC D 14 2500 367.0 367.0 38.0

LM239ADR SOIC D 14 2500 367.0 367.0 38.0

LM239ADR SOIC D 14 2500 333.2 345.9 28.6

LM239DR SOIC D 14 2500 364.0 364.0 27.0

LM239DR SOIC D 14 2500 367.0 367.0 38.0

LM239DR SOIC D 14 2500 333.2 345.9 28.6

LM239DRG3 SOIC D 14 2500 364.0 364.0 27.0

LM239DRG4 SOIC D 14 2500 333.2 345.9 28.6

LM239PWR TSSOP PW 14 2000 367.0 367.0 35.0

LM2901AVQPWR TSSOP PW 14 2000 367.0 367.0 35.0

LM2901AVQPWRG4 TSSOP PW 14 2000 367.0 367.0 35.0

LM2901DR SOIC D 14 2500 367.0 367.0 38.0

LM2901DR SOIC D 14 2500 333.2 345.9 28.6

LM2901DRG3 SOIC D 14 2500 364.0 364.0 27.0

LM2901DRG4 SOIC D 14 2500 333.2 345.9 28.6

LM2901NSR SO NS 14 2000 367.0 367.0 38.0

LM2901PWR TSSOP PW 14 2000 367.0 367.0 35.0

LM2901PWR TSSOP PW 14 2000 364.0 364.0 27.0

LM2901PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0

LM2901PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0

LM2901VQPWR TSSOP PW 14 2000 367.0 367.0 35.0

LM2901VQPWRG4 TSSOP PW 14 2000 367.0 367.0 35.0

LM339ADBR SSOP DB 14 2000 367.0 367.0 38.0

LM339ADR SOIC D 14 2500 364.0 364.0 27.0

LM339ADR SOIC D 14 2500 333.2 345.9 28.6

LM339ADR SOIC D 14 2500 367.0 367.0 38.0

LM339ADRG4 SOIC D 14 2500 333.2 345.9 28.6

LM339ANSR SO NS 14 2000 367.0 367.0 38.0

LM339APWR TSSOP PW 14 2000 367.0 367.0 35.0

LM339DR SOIC D 14 2500 367.0 367.0 38.0

LM339DRG3 SOIC D 14 2500 364.0 364.0 27.0

LM339DRG4 SOIC D 14 2500 333.2 345.9 28.6

LM339PWR TSSOP PW 14 2000 367.0 367.0 35.0

LM339PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0

LM339PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0

PACKAGE MATERIALS INFORMATION

www.ti.com 23-Oct-2013

Pack Materials-Page 3

MECHANICAL DATA

MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE

4040065 /E 12/01

28 PINS SHOWN

Gage Plane

8,20

7,40

0,55

0,95

0,25

12,90

12,30

10,50

8,50

Seating Plane

9,907,90

10,50

9,90

0,38

5,60

5,00

0,22

2016

6,50

0,05 MIN

5,905,90

DIM

A MAX

A MIN

PINS **

2,00 MAX

6,90

7,50

0,65 M

0,15

0°–ā8°

0,10

0,09

0,25

NOTES: A. All linear dimensions are in millimeters.

B. This drawing is subject to change without notice.

C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.

D. Falls within JEDEC MO-150

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other

changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest

issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and

complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale

supplied at the time of order acknowledgment.

TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms

and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary

to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily

performed.

TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and

applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or

other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information

published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or

endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the

third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration

and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered

documentation. Information of third parties may be subject to additional restrictions.

Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service

voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.

TI is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements

concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support

that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which

anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause

harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use

of any TI components in safety-critical applications.

In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to

help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and

requirements. Nonetheless, such components are subject to these terms.

No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties

have executed a special agreement specifically governing such use.

Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in

military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components

which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and

regulatory requirements in connection with such use.

TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of

non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Products Applications

Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive

Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications

Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers

DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps

DSP dsp.ti.com Energy and Lighting www.ti.com/energy

Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial

Interface interface.ti.com Medical www.ti.com/medical

Logic logic.ti.com Security www.ti.com/security

Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense

Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video

RFID www.ti-rfid.com

OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com

Wireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265