Bipolar Transistor Pin Configuration: 1. Base 2. Collector 3. Emitter 4. Collector Features: * * * High DC Current Gain Collector-Emitter Sustaining Voltage: V = 100V Min Monolithic Construction with Built-in Base-Emitter Shunt Resistors Absolute Maximum Ratings: Parameters Symbol Unit Collector Emitter Voltage Vceo Collector-Base Voltage Vcbo Emitter-Base Voltage Vebo 5V Collector Current Ic 8A Collector Peak Current Icm 16A Ib 120mA Base Current Total Power Dissipation upto TC = 25C Derate above 25C Total Power Dissipation upto T = 25C Derate above 25C 100V 75W 0.6W/C Ptot 2.2W 0.0175W/C Operating Junction Temperature Range Tj -65 to +150C Storage Temperature Range Tstg -65 to +150C Thermal Resistance, Junction-to-Case Rth (j-c) 1.67C/W Thermal Resistance, Junction-to-Ambient Rth (j-a) 57C/W www.element14.com www.farnell.com www.newark.com Page <1> 23/01/13 V1.1 Bipolar Transistor Electrical Characteristics: (Ta = +25C unless otherwise specified) Parameter Symbol Test Conditions Min. Typ. Max. Unit Vceo(sus) Ic = 100mA, Ib = 0 100 - - V OFF Characteristics Collector-Emitter Sustaining Voltage IC = 0; VEB = 100V - - 20 uA Vce = 100V, Vbe(off) = 1.5V - - 20 A Icex Vcb = 100V, Vbe(off) = 1.5V Tc = 150C - - 0.2 mA Iebo Vbe = 5V, Ic = 0 - - 2 mA Ic = 3A, Vce = 4V 1,000 - 20,000 - Ic = 8A, Vce = 4V 100 - - - Ic = 3A, Ib = 12mA - - 2 V Ic = 8A, Ib = 80mA - - 4 V Iceo Collector Cutoff Current Emitter Cutoff Current ON Characteristics DC Current Gain hfe Collector-Emitter Saturation Voltage Vce(sat) Base-Emitter ON Voltage Vbe(on) Ic = 4A, Vce = 4V - - 2.8 V Small-Signal Current Gain |hef| Ic = 3A, Vce = 4V, f =1MHz 4 - - - Output Capacitance Cob Vcb = 10V, Ie = 0, f = 0.1MHz - - 300 pF Dynamic Characteristics PNP Pin Configuration: 1. Base 2. Collector 3. Emitter 4. Collector Part Number Table Description Part Number Bipolar Transistor, PNP, TO-220 2N6042 Dimensions Min. Max. A 14.42 16.51 B 9.63 10.67 C 3.56 4.83 D - 0.9 E 1.15 1.4 F 3.75 3.88 G 2.29 2.79 H 2.54 3.43 J - 0.56 K 12.7 14.73 L 2.8 4.07 M 2.03 2.92 N - O 31.24 7 Dimensions : Millimetres Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 23/01/13 V1.1