Bulletin PD-20300 rev. D 07/04 30CTQ060 30CTQ060S 30CTQ060 -1 30 Amp SCHOTTKY RECTIFIER IF(AV) = 30Amp VR = 50 - 60V Major Ratings and Characteristics Description/ Features Characteristics 30CTQ Units IF(AV) Rectangular 30 A 50 - 60 V IFSM @ tp = 5 s sine 1000 A VF @ 15 Apk, TJ = 125C 0.56 V TJ range - 55 to 150 C This center tap Schottky rrectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. waveform VRRM 150 C TJ operation Center tap configuration Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance (per leg) High frequency operation Guard ring for enhanced ruggedness and long term reliability Case Styles 30CTQ... 30CTQ... S Base Common Cathode Base Common Cathode 2 1 Anode 2 Common Cathode 30CTQ... -1 Base Common Cathode 2 3 Anode TO-220 Document Number: 93306 1 Anode 2 Common Cathode D2PAK 2 3 Anode 1 Anode 2 Common Cathode 3 Anode TO-262 www.vishay.com 1 30CTQ... Series Bulletin PD-20300 rev. D 07/04 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) 30CTQ050 30CTQ060 50 60 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM * See Fig. 5 Values Units 15 A 50% duty cycle @ TC = 105C, rectangular wave form A 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated V RRM applied (Per Leg) (Per Device) 30 Max. Peak One Cycle Non-Repetitive 1000 Surge Current (Per Leg) 260 * See Fig. 7 EAS Non-Repetitive Avalanche Energy (Per Leg) IAR Repetitive Avalanche Current (Per Leg) Conditions 13 mJ TJ = 25 C, I AS = 1.50 Amps, L = 11.5 mH 1.50 A Values Units 0.62 0.82 0.56 V V V @ 15A @ 30A @ 15A 0.71 V @ 30A 0.80 mA TJ = 25 C 45 mA TJ = 125 C TJ = TJ max. Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) Conditions TJ = 25 C TJ = 125 C VR = rated VR VF(TO) Threshold Voltage 0.39 V rt Forward Slope Resistance 8.47 m CT Max. Junction Capacitance (Per Leg) 720 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25C LS Typical Series Inductance (Per Leg) 8.0 nH Measured lead to lead 5mm from package body 10000 V/ s dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters Values Units C TJ Max. Junction Temperature Range -55 to 150 Tstg Max. Storage Temperature Range -55 to 150 Conditions C RthJC Max. Thermal Resistance Junction to Case (Per Leg) 3.25 C/W DC operation RthJC Max. Thermal Resistance Junction to Case (Per Package) 1.63 C/W DC operation RthCS Typical Thermal Resistance, Case to Heatsink 0.50 C/W Mounting surface , smooth and greased (only for TO-220) wt Approximate Weight T Mounting Torque Document Number: 93306 2 (0.07) g (oz.) Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) www.vishay.com 2 30CTQ... Series Bulletin PD-20300 rev. D 07/04 1000 Reverse Current - IR (mA) 1000 TJ = 125C 100 125C 10 100C 1 75C 0.1 50C 25C 0.01 TJ = 25C 0.001 0 10 20 30 40 50 60 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 Junction Capacitanc e - C T (pF) Instanta neous Forward Current - IF (A) TJ = 150C TJ = 150C 100 10 1 TJ = 25C 100 0 0.4 0.8 1.2 1.6 2 0 10 20 30 40 50 60 Reverse Voltag e - VR (V) Forward Voltage Drop - V FM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Thermal Impedance Z thJC (C/ W) 10 1 D = 0.75 D = 0.50 D = 0.33 0.1 D = 0.25 D = 0.20 P DM Notes: 0.01 Single Pulse (Thermal Resistance) 0.001 0.00001 0.0001 0.001 0.01 t1 t2 1. Duty fac tor D = t 1/ t 2 2. Peak TJ = PDM x Z thJC+ TC 0.1 1 10 100 t 1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 93306 www.vishay.com 3 30CTQ... Series Bulletin PD-20300 rev. D 07/04 14 150 Average Power Loss - (Watts) Allowable Case Temperature - (C) 160 140 130 DC 120 110 Square wave (D = 0.50) 80% Ra ted VR a p plied 100 90 80 70 60 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 12 10 8 DC RMS Limit 6 4 2 see note (2) 0 5 10 15 20 0 25 0 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) 5 10 15 20 25 Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L IRFP460 DUT Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 10 V Document Number: 93306 www.vishay.com 4 30CTQ... Series Bulletin PD-20300 rev. D 07/04 Outline Table Conform to JEDEC outline TO-220AB Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) Document Number: 93306 www.vishay.com 5 30CTQ... Series Bulletin PD-20300 rev. D 07/04 Outline Table Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) Tape & Reel Information Dimensions in millimeters and (inches) Document Number: 93306 www.vishay.com 6 30CTQ... Series Bulletin PD-20300 rev. D 07/04 Part Marking Information TO-220 EXAMPLE: THIS IS A 30CTQ060 LOT CODE 1789 ASSEMBLED ON WW 19, 2000 IN THE ASSEMBLY LINE "C" PART NUMBER INTERNATIONAL RECTIFIER LOGO DATE CODE YEAR 0 = 2000 WEEK 19 LINE C ASSEMBLY LOT CODE D2PAK INTERNATIONAL THIS IS A 30CTQ060S RECTIFIER LOT CODE 8024 LOGO ASSEMBLED ON WW 02, 2003 IN ASSEMBLY LINE "C" ASSEMBLY LOT CODE PART NUMBER 30CTQ060S DATE CODE YEAR 3 = 2003 WEEK 02 LINE C TO-262 INTERNATIONAL EXAMPLE: THIS IS A 30CTQ060-1 RECTIFIER LOT CODE 1789 LOGO ASSEMBLED ON WW 19, 2002 IN ASSEMBLY LINE "C" ASSEMBLY LOT CODE Document Number: 93306 PART NUMBER DATE CODE YEAR 2 = 2002 WEEK 19 LINE C www.vishay.com 7 30CTQ... Series Bulletin PD-20300 rev. D 07/04 Ordering Information Table Device Code 30 C T Q 060 S TRL - 1 2 3 4 5 6 7 8 1 - Current Rating (30A) 2 - Circuit Configuration 3 - T = TO-220 4 - Schottky "Q" Series 050 = 50V 5 - Voltage Ratings 060 = 60V 6 - y S = D2Pak 7 - C = Common Cathode y -1= TO-262 y none = Tube (50 pieces) y TRL = Tape & Reel (Left Oriented - for D 2Pak only) y TRR = Tape & Reel (Right Oriented - for D 2Pak only) 8 - y none = Standard Production y PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 07/06 Document Number: 93306 www.vishay.com 8 Legal Disclaimer Notice Vishay Notice The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of International Rectifier's Power Control Systems (PCS) business, which closed in April 2007. Specifications of the products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. International Rectifier(R), IR(R), the IR logo, HEXFET(R), HEXSense(R), HEXDIP(R), DOL(R), INTERO(R), and POWIRTRAIN(R) are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product names noted herein may be trademarks of their respective owners. Document Number: 99901 Revision: 12-Mar-07 www.vishay.com 1