Plastic Film Capacitors Metallized Polypropylene Film Capacitor Type: ECWH(C) Designed for high frequency and pulse applications. Features *Excellent electrical characteristics *Low loss *Flame-retardant epoxy resin coating *RoHS directive compliant Recommended Applications *General resonance circuit (630 VDC) *Resonance circuits for microwave oven and IH cooker (630 VDC) *Resonance circuits for microwave oven (630 VDC, 1250 VDC) *General high voltage circuit (3000 VDC) Explanation of Part Numbers (630 VDC) 1 2 3 4 E C W H Product code Dielectric & construction 5 6 7 8 9 10 11 C Rated voltage Capacitance Cap. Tol. Suffix H 3 % Suffix Suffix Blank B C 6 630VDC Lead Form Straight Crimped lead Cut lead Explanation of Part Number for Odd Size Taping (630 VDC) E C Product code W H Dielectric & construction R Rated voltage Capacitance C Ammo Cap.tol 7.5mm Suffix Explanation of Part Numbers (1250 VDC) 1 2 3 4 5 6 7 8 9 10 11 12 E C W H C 3 B 1 0 4 J A Product code Dielectric & construction Rated voltage Capacitance 3B 1250VDC Cap. Tol. Suffix Suffix A 5 % J Lead Form Cut lead Explanation of Part Numbers (3000 VDC) 1 2 3 4 5 6 7 E C W H C 3 F Product code Dielectric & construction 8 10 11 12 J Rated voltage 3F 3000VDC 9 Capacitance J 5 % Cap. Tol. Suffix Suffix Blank Q D Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. - FC70 - Lead Form Straight Crimped lead Cut lead Plastic Film Capacitors Specifications 630 VDC Category temp. range (Including temperature-rise on unit surface) 1250 VDC -40 C to 105 C : General resonance circuit -40 C to 85 C : When using compulsive air cooling for a resonance circuit -40 C to 85 C : When using compulsive air cooling for a resonance circuit Rated voltage 3000 VDC -40 C to 85 C : General high voltage circuit 630 VDC, 1250 VDC, 3000 VDC 630 VDC 0.18 F to 0.33 F Capacitance range 1250 VDC 0.10 F 3000 VDC 1250 VDC 0.0024 F to 0.01 F 3 %(H) 5 %(J) 3000 VDC 5 %(J) 630 VDC 630 VDC 1250 VDC Dissipation factor (tan ) 3000 VDC Withstand voltage Insulation resistance (IR) tan0.05 % (20 C,1 kHz), tan0.1 % (20 C,10 kHz) tan0.1 % (20 C,1 kHz), tan0.1 % (20 C,10 kHz) Between terminals : Rated volt. (VDC)x150 % 60 s 630 VDC IR9000 M (20 , 500 VDC, 60 s) 1250 VDC 3000 VDC IR50000 M (20 , 500 VDC, 60 s) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of "Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage". Dimensions in mm (not to scale) Q C Cut lead D Cut lead A G max. Cut lead Packaging Specifications for Bulk Package Packing quantity : 100 pcs./bag Taping Specifications for Automatic Insertion Taping style Refer to the page of taping specifications. Packaging Specifications Type Rated volt. Cap. range (F) ECWH(C) 630 VDC 0.18 to 0.33 Lead Spacing Taping style AD AS B C D E Packing Ammo See the column "Rating, Dimensions & Quantity Box " for packing quantity. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. - FC71 - Style E Lead Spacing 7.5 mm Metallized Film Capacitance tolerance Plastic Film Capacitors Rating & Dimensions Rated voltage : 630 VDC Capacitance tolerance : 3 %(H) Part No. ECWH6184HC( ECWH6284HC( ECWH6304HC( ECWH6324HC( ECWH6334HC( ) ) ) ) ) Cap (F) L max T max 0.18 0.28 0.30 0.32 0.33 20.7 20.7 20.7 20.7 20.7 11.5 14.3 14.8 14.5 14.7 Dimensions (mm) H max. S F Crimped lead Crimped lead Straight (Suffix B) (Suffix B) 17.5 21.3 16.3 10.0 17.5 24.1 19.1 10.0 17.5 24.6 19.6 10.0 17.5 25.9 20.9 10.0 17.5 26.1 21.1 10.0 Min. order Q'ty G max. d 1.5 1.5 1.5 1.5 1.5 0.8 0.8 0.8 0.8 0.8 Taping 7.5 mm Bulk 250 1000 200 700 Rated voltage : 1250 VDC Capacitance tolerance : 5 %(J) Dimensions (mm) Min. order Q'ty Part No. Cap (F) L max T max H max. F G max. d Bulk ECWHC3B104JA 0.10 20.7 13.5 20.6 17.5 1.5 0.8 700 Rated voltage : 3000 VDC Capacitance tolerance : 5 %(J) Dimensions (mm) Part No. ECWHC3F242J( ECWHC3F362J( ECWHC3F392J( ECWHC3F432J( ECWHC3F562J( ECWHC3F822J( ECWHC3F103J( ) ) ) ) ) ) ) Cap (F) L max T max 0.0024 0.0036 0.0039 0.0043 0.0056 0.0082 0.01 25.8 25.8 25.8 25.8 25.8 25.8 25.8 6.1 7.2 7.5 6.5 7.3 7.5 8.2 H Min. order Q'ty S max. Straight Crimped lead (Suffix Q) F Crimped lead (Suffix Q) G max. d Bulk 10.9 11.9 12.2 11.2 12.0 15.3 16.1 17.9 18.9 19.2 18.2 19.0 22.3 23.1 22.5 22.5 22.5 22.5 22.5 22.5 22.5 23.0 23.0 23.0 23.0 23.0 23.0 23.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1000 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. - FC72 - ECWH C Type DC630V series Metallized Polypropylene Film Electrical Characteristics <Typical Data > Temperature Characteristics at 1kHz 10 Capacitance change(%) 10 Capacitance change(%) Frequency Characteristics 5 0.33uF 0.18uF 0 -5 0.33uF 0.28uF 5 0.18uF 0 -5 -10 -10 -40 -20 0 20 40 60 80 100 1 10 Temperature() at 1kHz 0.4 0.3 0.2 0.1 0.33uF 0.18uF 10000 1 0.33uF 0.28uF 0.18uF 0 0 -40 -20 0 20 40 60 80 100 1 Temperature() 1.E+13 at DC100V 10 100 1000 Frequency(kHz) 10000 100000 10000 0.18uF 1.E+12 1.E+11 Impedance(ohm) Insulation resistance(ohm) 1000 2 Dissipation factor(%) Dissipation factor(%) 0.5 100 Frequency(kHz) 0.33uF 1.E+10 1.E+09 1.E+08 1000 0.18uF 100 0.28uF 0.33uF 10 1 0.1 0.01 0.001 1.E+07 -40 -20 0 20 40 60 80 Temperature() 100 1 10 100 1000 Frequency(kHz) 10000 ECWH C Type DC630V series Metallized Polypropylene Film Applicable Specifications PermissiblePermissible Current Derating by Temperature Voltage Permissible Current Percentage to the permissible current Effective value 12.0 0.33uF 0.32uF 0.30uF 0.28uF 8.0 0.18uF 6.0 4.0 2.0 0.01uF to 0.047uF 80 60 40 20 0 0.0 10 100 Frequency(kHz) -40 1000 -20 0 20 40 60 80 100 120 Temperature of capacitor surface () Pulse Handling Capability (dv/dt) Voltage Derating by Temperature (Max 10000cycles) Rated Voltage DC 630V dV/dt (V/s) Capacitance (F) Code 0.180 184 90 0.280 284 140 0.300 304 0.320 324 160 0.330 334 165 500 Current (A0-P) 150 Percentage to the rated voltage (%) Effective value (Arms) 10.0 100 110 100 0.01uF to 0.047uF 90 80 70 60 50 -40 -20 0 20 40 60 80 100 120 Temperature of capacitor surface () *Please consult Panasonic if your condition exceeds the above *P When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P) value is calculated using nominal capacitance. ECWH C Type DC1250V seriesMetallized Polypropylene Film Electrical Characteristics <Typical Data 0.1F > Temperature Characteristics at 1kHz 10 Capacitance change(%) 10 Capacitance change(%) Frequency Characteristics 5 0 -5 5 0 -5 -10 -10 -40 -20 0 20 40 60 80 100 1 10 Temperature() at 1kHz 0.4 0.3 0.2 0.1 0 10000 1 0 -40 -20 0 20 40 60 80 100 1 Temperature() 1.E+13 at DC500V 10 100 1000 Frequency(kHz) 10000 100000 10000 1.E+12 Impedance(ohm) Insulation resistance(ohm) 1000 2 Dissipation factor(%) Dissipation factor(%) 0.5 100 Frequency(kHz) 1.E+11 1.E+10 1.E+09 1.E+08 1000 100 10 1 0.1 0.01 0.001 1.E+07 -40 -20 0 20 40 60 80 Temperature() 100 1 10 100 1000 Frequency(kHz) 10000 ECWH C Type DC1250V series Metallized Polypropylene Film Applicable Specifications PermissiblePermissible Current Derating by Temperature Voltage Permissible Current Percentage to the permissible current Effective value 9.0 8.0 6.0 5.0 4.0 3.0 2.0 1.0 0.01uF to 0.047uF 80 60 40 20 0 0.0 10 100 -40 1000 Frequency(kHz) -20 0 20 40 60 80 100 120 Temperature of capacitor surface () Pulse Handling Capability (dv/dt) Voltage Derating by Temperature (Max 10000cycles) Rated Voltage Capacitance (F) Code dV/dt (V/s) DC1250V 0.100 104 500 Current (A0-P) 50 Percentage to the rated voltage (%) Effective value (Arms) 7.0 100 110 100 90 80 70 60 50 -40 -20 0 20 40 60 80 100 120 Temperature of capacitor surface () *Please consult Panasonic if your condition exceeds the above *P When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P) value is calculated using nominal capacitance. DC3000V seriesMetallized Polypropylene Film ECWHC Type Electrical Characteristics <Typical Data > Temperature Characteristics at 1kHz 10 5 Capacitance change(%) 10 Capacitance change(%) Frequency Characteristics 0.01uF 0.0082uF 0.0043uF 0.0024uF 0 -5 0.01uF 0.0082uF 0.0043uF 0.0024uF 5 0 -5 -10 -10 -40 -20 0 20 40 60 80 100 1 10 Temperature() at 1kHz 0.4 0.3 0.2 0.01uF 0.0082uF 0.0043uF 0.0024uF 0.1 0 10000 0.01uF 0.0082uF 0.0043uF 0.0024uF 1 0 -40 -20 0 20 40 60 80 100 1 Temperature() 1.E+13 at DC500V 10 100 1000 Frequency(kHz) 10000 100000 10000 1.E+12 Impedance(ohm) Insulation resistance(ohm) 1000 2 Dissipation factor(%) Dissipation factor(%) 0.5 100 Frequency(kHz) 0.01uF 0.0082uF 0.0043uF 0.0024uF 1.E+11 1.E+10 1.E+09 1.E+08 0.0024uF 0.0043uF 0.0082uF 0.01uF 1000 100 10 1 0.1 0.01 0.001 1.E+07 -40 -20 0 20 40 60 80 Temperature() 100 1 10 100 1000 Frequency(kHz) 10000 DC3000V series Metallized Polypropylene Film ECWHC Type Applicable Specifications PermissiblePermissible Current Derating by Temperature Voltage Permissible Current 0.01uF 0.0082uF 2.0 1.5 0.0043u 0.0024u 1.0 0.5 100 0.01uF to 0.047uF 80 60 40 20 0 0.0 10 100 Frequency(kHz) -40 1000 -20 0 20 40 60 80 100 120 Temperature of capacitor surface () Pulse Handling Capability (dv/dt) Voltage Derating by Temperature (Max 10000cycles) Rated Voltage DC 3000V dV/dt (V/s) Capacitance (F) Code 0.0024 242 4.8 0.0036 362 7.2 0.0039 392 0.0043 432 0.0056 562 11.2 0.0082 822 16.4 0.0100 103 20.0 Current (A0-P) 7.8 2000 8.6 Percentage to the rated voltage (%) Effective value (Arms) 2.5 Percentage to the permissible current Effective value 3.0 110 100 0.01uF to 0.047uF 90 80 70 60 50 -40 -20 0 20 40 60 80 100 120 Temperature of capacitor surface () *Please consult Panasonic if your condition exceeds the above *P When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P) value is calculated using nominal capacitance.