FE30-005 THRU FE30-06 FRONTIER ELECTRONICS CO., LTD. 3A FAST EFFICIENT RECTIFIER FEATURES ! LOW POWER LOSS, HIGH EFFICIENCY ! LOW LEAKAGE ! LOW FORWARD VOLTAGE DROP ! HGH CURRENT CAPABILITY ! HIGH SPEED SWITCHING ! HIGH RELIABILITY ! HIGH CURRENT SURGE ! GLASS PASSIVATED CHIP JUNCTION 1.0(25.4) MIN .052(1.3) .048(1.2) .375(9.5) .335(8.5) .220(5.6) .197(5.0) MECHANICAL DATA ! CASEMOLDED PLASTIC ! EPOXYUL 94V-0 RATE FLAME RETARDANT ! LEADMIL-STD-202E METHOD 208C GUARANTEED ! MOUNTING POSITIONANY ! WEIGHT1.20 GRAMS 1.0(25.4) MIN CASE-DO201AD DIMENSIONS IN INCHES AND (MILLIMETERS) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT .375(9.5mm) LEAD LENGTH AT TA=55C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) TYPICAL THERMAL RESISTANCE (NOTE 2) STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE SYMBOL -005 VRRM 50 VRMS 35 VDC 50 -01 100 70 100 -015 150 105 150 -02 200 140 200 -03 300 210 300 -04 400 280 400 -05 500 350 500 -06 600 420 600 UNITS V V V IO 3.0 A IFSM 60 A CJ 70 30 - 55 TO + 150 - 55 TO + 150 Rja TSTG TOP PF /W ELECTRICAL CHARACTERISTICS (AT TA =25C UNLESS OTHERWISE NOTED) CHARACTERISTICS MAXIMUM FORWARD VOLTAGE AT IO DC MAXIMUM REVERSE CURRENT AT 25 MAXIMUM REVERSE CURRENT AT 100 MAXIMUM REVERSE RECOVERY TIME (NOTE 3) SYMBOL VF IR IR TRR -005 -01 -015 -02 -03 0.98 1 50 25 NOTE 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. BOTH LEADS ATTATCHED TO HEATSINK 20x 20x 1t(mm) COPPER PLATE AT LEAD LENTH 5mm 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A 6-45 -04 1.25 -05 -06 1.85 UNITS V A A nS RATINGS AND CHARACTERISTIC CURVE FE30-005 THRU FE30-06 FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 100 NONINDUCTIVE (-) D.U.T. PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 1 NON INDUCTIVE (-) FIG. 2-TYPICAL FORWARD CURRENT DERATING CURVE Trr OSCILLOSCOPE ( NOTE 1 ) (+) +0.5A 0 -0.25A -1.0A NOTE: 1. RISETIME=7ns MAX. INPUT IMPEDANCE=1 MEGOHM 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS INSTANTANEOUS FORWARD CURRENT (A) 1 TJ=80oC 0.1 TJ=25oC .01 80 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE (oC) 100 120 10.0 FE30-005~30-02 1.0 FE30-03~30-04 .1 .01 FE30-06 .001 .4 140 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 6-TYPICAL JUNCTION CAPACITANCE FIG. 5-MAXIMUN NON-REPETITIVE FORWARD SURGE CURRENT 200 70 8.3 ms Single Half Sine Wave (JEDEC Method) 100 (pF) 60 50 JUNCTION CAPACITANCE PEAK FORWARD SURGE CURRENT (A) INSTANTANEOUS REVERSE CURENT (uA) TJ=125oC 60 1 FIG. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 40 2 SET TIME BASE FOR 10/20 ns/cm 1000 20 Single Phase Half Wave 60 Hz Resistive or Inductive Load 4 3 1cm FIG. 3-TYPICAL REVERSE CHARACTERISTICS 10 6 5 AVERAGE FORWARD CURRENT (A) 50 NONINDUCTIVE 40 30 20 10 TJ=25oC 40 20 10 6 4 2 1 0 1 5 10 20 50 .1 100 .2 .4 1.0 2 4 10 REVERSE VOLTAGE (V) NUMBER OF CYCLES AT 60 Hz 6-46 20 40 100