SF10-005 THRU SF10-06 FRONTIER ELECTRONICS CO., LTD. 1A SUPER FAST RECOVERY RECTIFIER FEATURES ! LOW FORWARD VOLTAGE ! HIGH SURGE CAPABILITY ! SUPER FAST SWITCHING SPEED ! GOOD FOR SWITCHING MODE CIRCUIT 1.0(25.4) MIN .034(0.9) .028(0.7) .205(5.2) .166(4.2) .107(2.7) .080(2.0) MECHANICAL DATA ! CASEMOLDED PLASTIC ! EPOXYUL 94V-0 FLAME RETARDANT PLASTIC CASE ! LEADSAXIAL LEADS, SOLDERABLE PER MIL-STD-202, METHOD 208 ! MOUNTING POSITIONANY ! WEIGHT0.34 GRAMS 1.0(25.4) MIN CASE-DO41 DIMENSIONS IN INCHES AND (MILLIMETERS) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT .375(9.5mm) LEAD LENGTH AT TA=55C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) TYPICAL THERMAL RESISTANCE (NOTE 2) STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE SYMBOL VRRM VRMS VDC SF10005 50 35 50 SF1001 100 70 100 SF10015 150 105 150 SF1002 200 140 200 SF1003 300 210 300 SF1004 400 280 400 SF1005 500 350 500 SF10UNITS 06 600 V 420 V 600 V IO 1.0 A IFSM 30 A CJ Rja TSTG TOP 15 10 50 - 55 TO + 150 - 55 TO + 150 ELECTRICAL CHARACTERISTICS (AT TA =25C UNLESS OTHERWISE NOTED) SF10- SF10- SF10- SF10- SF10- SF10CHARACTERISTICS SYMBOL 005 01 015 02 03 04 MAXIMUM FORWARD VOLTAGE AT IO DC VF 0.95 1.25 MAXIMUM REVERSE CURRENT AT 25 IR 10 MAXIMUM REVERSE CURRENT AT100 IR 100 MAXIMUM REVERSE RECOVERY TIME (NOTE 3) TRR 35 NOTE 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. BOTH LEADS ATTATCHED TO HEATSINK 20x 20x 1t(mm) COPPER PLATE AT LEAD LENTH 5mm 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A 5-1 PF /W SF10- SF10UNITS 05 06 1.85 V A A nS RATINGS AND CHARACTERISTIC CURVE SF10-005 THRU SF10-06 FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 100 NONINDUCTIVE FIG. 2-TYPICAL FORWARD CURRENT DERATING CURVE Trr (-) D.U.T. 2.0 +0.5A AVERAGE FORWARD CURRENT (A) 50 NONINDUCTIVE PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 0 1 NON INDUCTIVE (-) (+) OSCILLOSCOPE -0.25A ( NOTE 1 ) NOTE: 1. RISETIME=7ns MAX. INPUT IMPEDANCE=1 MEGOHM 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS 10 o TJ=25 C 1.0 0.1 60 80 100 120 140 INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURENT (uA) 100 40 25 50 75 100 125 150 AMBIENT TEMPERATURE (oC) FIG. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 20 0 SET TIME BASE FOR 10/20 ns/cm 1000 0 1.0 1cm FIG. 3-TYPICAL REVERSE CHARACTERISTICS Single Phase Half Wave 60 Hz Resistive or Inductive Load SF10-005~10-02 1.0 SF10-03~10-04 .1 .01 SF10-06 .001 .2 0 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) .4 .6 .8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE (V) FIG. 6-TYPICAL JUNCTION CAPACITANCE 200 40 100 8.3 ms Single Half Sine Wave (JEDEC Method) 30 JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) FIG. 5-MAXIMUN NON-REPETITIVE FORWARD SURGE CURRENT 25 20 15 10 5 0 40 5 10 20 50 NUMBER OF CYCLES AT 60 Hz 100 SF10-005~10-02 20 10 6 4 SF10-03~10-06 2 1 1 TJ=25oC .1 .2 .4 1.0 2 4 10 REVERSE VOLTAGE (V) 5-2 20 40 100