https://www.phoenixcontact.com/gb/products/1424195
01/06/2015Page1/6
Flush-type connector-SACC-CI-M12FS-12CON-L90-1424195
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type socket, 12-pos. without shroud, A-coded, with angled solder connection, contact
insert only
Why buy this product
Key commercial data
Packing unit 20 pc
Minimum order quantity 20 pc
GTIN
Weight per Piece (excluding packing) 6.01 g
Custom tariff number 85366990
Country of origin Germany
Product key ABQCBD
Note Made to Order (non-returnable)
Technical data
Ambient conditions
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
Degree of protection IP67
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C 1.5 A
Rated voltage 30 V
https://www.phoenixcontact.com/gb/products/1424195
01/06/2015Page2/6
Flush-type connector-SACC-CI-M12FS-12CON-L90-1424195
Technical data
General
Rated surge voltage 0.8 kV
Number of positions 12
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Coding A - standard
Standards/regulations M12 connector IEC61076-2-101
Status display No
Surge voltage category III
Pollution degree 3
Connection method Solder pins
Insertion/withdrawal cycles > 100
Torque 3 Nm ... 4 Nm (Installation-side)
Mounting type PCB mounting
Material
Inflammability class according to UL 94 V0
Contact material CuZn
Contact surface material Au
Contact carrier material PA6T
Sealing material FKM
Cable
Conductor cross section 0.14 mm²
Conductor structure signal line 7x 0.16 mm
Core diameter including insulation 1.1 mm ±0.05 mm
Thickness, insulation 0.21 mm
Insulation resistance ≥ 20 MΩ*km
Conductor resistance ≤ 57.6 mΩ/m
Nominal voltage, cable 300 V
Test voltage, cable 2000 V AC
Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (cable, flexible installation)
Classifications
eCl@ss
eCl@ss 4.0 27060306
eCl@ss 4.1 27060306
eCl@ss 5.0 27061801
eCl@ss 5.1 27143423
eCl@ss 6.0 27143423
eCl@ss 7.0 27449001
https://www.phoenixcontact.com/gb/products/1424195
01/06/2015Page3/6
Flush-type connector-SACC-CI-M12FS-12CON-L90-1424195
Classifications
eCl@ss
eCl@ss 8.0 27440103
ETIM
ETIM 3.0 EC002061
ETIM 4.0 EC002062
ETIM 5.0 EC002061
UNSPSC
UNSPSC 6.01 31251501
UNSPSC 7.0901 31251501
UNSPSC 11 31251501
UNSPSC 12.01 31251501
UNSPSC 13.2 31251501
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approvals submitted
Approval details
EAC
Accessories
Accessories
Panel mounting base
Housing screw connection-SACC-M12-SCO NUT-1552243
M12 SPEEDCON housing screw connection for M12 female inserts, with O-ring, for all SPEEDCON-capable THR
and wave soldering contact carriers
https://www.phoenixcontact.com/gb/products/1424195
01/06/2015Page4/6
Flush-type connector-SACC-CI-M12FS-12CON-L90-1424195
Accessories
Housing screw connection-SACC-DSIV-M12-NUT-1416144
Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier
and for the two-piece angled M12 contact carrier
Housing screw connection-SACC-M12-SCO NUT L 90-1432460
M12-SPEEDCON housing screw connection for M12 female inserts, with flat gasket, for all Speedcon-compatible
THR and wave soldering contact carriers
Housing screw connection-SACC-BP-F-M12/M15-6-THR-1414004
Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1
Housing screw connection-SACC-BP-F-M12/M15-7-THR-1414003
Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1
Housing screw connection-SACC-BP-F-M12/M15-6-THR SCO-1414020
Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1
https://www.phoenixcontact.com/gb/products/1424195
01/06/2015Page5/6
Flush-type connector-SACC-CI-M12FS-12CON-L90-1424195
Accessories
Housing screw connection-SACC-BP-F-M12/M15-7-THR SCO-1414005
Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1
Housing screw connection-SACC-M12 NUT PRESS-1437889
Housing screw connection for two-piece M12 connectors for the reflow soldering process.
Protective cap
Screw plug-PROT-M12-1680539
An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors
Screw plug-PROT-M12 SH-1503302
An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type
connectors
Screw plug-PROT-M12 FB-1555538
M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type
connectors for the food industry
Drawings
https://www.phoenixcontact.com/gb/products/1424195
01/06/2015Page6/6
Flush-type connector-SACC-CI-M12FS-12CON-L90-1424195
Drilling
diagram
Drilling
diagram
only
valid
in
connection
with
the
SACC-
M12-
SCO
NUT
L90
housing
(order
no.
1432460)
Schematic diagram
23
4
5
6
7
8
1
9
10 11
12
Pin assignment M12, 12-pos., female side view
Dimensional drawing
8,5
15,9
Ø0,8
29
M12 flush-type socket, angled
Dimensional drawing
Ø7
Ø1
Optionally with O-ring (green) for tight seal when plugged in.
- the axial mating force of 80 N per connector may not be exceeded when
using with assembled O-ring!
- Avoid radial forces!
Phoenix Contact 2015 © - all rights reserved
http://www.phoenixcontact.com