https://www.phoenixcontact.com/gb/products/1424195 Flush-type connector - SACC-CI-M12FS-12CON-L90 - 1424195 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 12-pos. without shroud, A-coded, with angled solder connection, contact insert only Why buy this product Key commercial data Packing unit 20 pc Minimum order quantity 20 pc GTIN Weight per Piece (excluding packing) 6.01 g Custom tariff number 85366990 Country of origin Germany Product key ABQCBD Note Made to Order (non-returnable) Technical data Ambient conditions Ambient temperature (operation) -25 C ... 85 C (Plug / socket) -40 C ... 85 C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40C 1.5 A Rated voltage 30 V 01/06/2015 Page 1 / 6 https://www.phoenixcontact.com/gb/products/1424195 Flush-type connector - SACC-CI-M12FS-12CON-L90 - 1424195 Technical data General Rated surge voltage 0.8 kV Number of positions 12 Contact resistance 3 m Insulation resistance 100 M Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category III Pollution degree 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type PCB mounting Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA6T Sealing material FKM Cable Conductor cross section 0.14 mm Conductor structure signal line 7x 0.16 mm Core diameter including insulation 1.1 mm 0.05 mm Thickness, insulation 0.21 mm Insulation resistance 20 M*km Conductor resistance 57.6 m/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 C ... 85 C (cable, fixed installation) -25 C ... 85 C (cable, flexible installation) Classifications eCl@ss eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 01/06/2015 Page 2 / 6 https://www.phoenixcontact.com/gb/products/1424195 Flush-type connector - SACC-CI-M12FS-12CON-L90 - 1424195 Classifications eCl@ss eCl@ss 8.0 27440103 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals EAC Ex Approvals Approvals submitted Approval details EAC Accessories Accessories Panel mounting base Housing screw connection - SACC-M12-SCO NUT - 1552243 M12 SPEEDCON housing screw connection for M12 female inserts, with O-ring, for all SPEEDCON-capable THR and wave soldering contact carriers 01/06/2015 Page 3 / 6 https://www.phoenixcontact.com/gb/products/1424195 Flush-type connector - SACC-CI-M12FS-12CON-L90 - 1424195 Accessories Housing screw connection - SACC-DSIV-M12-NUT - 1416144 Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier and for the two-piece angled M12 contact carrier Housing screw connection - SACC-M12-SCO NUT L 90 - 1432460 M12-SPEEDCON housing screw connection for M12 female inserts, with flat gasket, for all Speedcon-compatible THR and wave soldering contact carriers Housing screw connection - SACC-BP-F-M12/M15-6-THR - 1414004 Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1 Housing screw connection - SACC-BP-F-M12/M15-7-THR - 1414003 Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1 Housing screw connection - SACC-BP-F-M12/M15-6-THR SCO - 1414020 Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1 01/06/2015 Page 4 / 6 https://www.phoenixcontact.com/gb/products/1424195 Flush-type connector - SACC-CI-M12FS-12CON-L90 - 1424195 Accessories Housing screw connection - SACC-BP-F-M12/M15-7-THR SCO - 1414005 Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1 Housing screw connection - SACC-M12 NUT PRESS - 1437889 Housing screw connection for two-piece M12 connectors for the reflow soldering process. Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry Drawings 01/06/2015 Page 5 / 6 https://www.phoenixcontact.com/gb/products/1424195 Flush-type connector - SACC-CI-M12FS-12CON-L90 - 1424195 Drilling diagram Schematic diagram 10 2 3 11 4 1 Drilling diagram only valid in assignment M12, 12-pos., female side view Pin connection with the SACCM12SCO NUT L90 housing (order no. 1432460) Dimensional drawing 5 9 12 8 6 7 Dimensional drawing 15,9 8,5 29 O0,8 M12 flush-type socket, angled O7 O1 Optionally with O-ring (green) for tight seal when plugged in. - the axial mating force of 80 N per connector may not be exceeded when using with assembled O-ring! - Avoid radial forces! Phoenix Contact 2015 (c) - all rights reserved http://www.phoenixcontact.com 01/06/2015 Page 6 / 6