Solid State Devices, Inc.
14701 Firestone Blvd * La Mira da, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information 1/
SPD __ __ __
Screening 2/
__ = Not Screened
TX = TX Level
TXV = TXV
S = S Level
Package Type
__ = Axial Leaded
SMS = Surface Mount Square Tab
Family/Voltage
0802 = 80 V
0902 = 90 V
1002 = 100 V
SPD0802 and SMS
thru
SPD1002 and SMS
2 AMP
80 - 100 VOLTS
SCHOTTKY
RECTIFIER
Features:
PIV to 100 Volts
Extremely Low Forward Voltage Drop
Low Reverse Leakage Current
• High Surge Capacity
HV/Replacement for 1N5817 - 1N58 19 Series
• Hermetically Sealed
TX, TXV, and Space Level Screening Available2/
Category III metallurgical bond per MIL PRF
19500 appendix A
Maximum Ratings Symbol Value Units
Reverse Voltage SPD0802 & SMS
SPD0902 & SMS
SPD1002 & SMS
VRRM
VRWM
VR
80
90
100 Volts
Average Rectified Forward Current
(Resistive Load, 60Hz, Sine Wave, TL or TE = 55 oC) Io 2 Amps
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave Superimposed on Io, allow
junction to reach equilibrium between pulses, TA = 25oC) IFSM 40 Amps
Operating and Storage Temperature Range TOP & TSTG -55 to +250 ºC
Maximum Thermal Resistance
Junction to Lead, L = .25" (Axial Lead)
Junction to End Tab (Surface Mount)
RθJL
RθJE 15
12 ºC/W
NOTES:
1/ For Ordering Information, Price, and Availability- Contact Factory.
2/ Screening Based on MIL-PRF-19500. Screening Flows Available on
Request.
Axial Lead
Surface Mount
Square Tab
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0006E DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mira da, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
s
sdi@ssdi-power.com * www.ssdi-power.com
SPD0802 and SMS
thru
SPD1002 and SMS
Electrical Characteristic Symbol Min Max Units
Instantaneous Forward Voltage Drop
(Tj = 25ºC, 300 - 500 µsec pulse)
If = 0.5A
If = 1A
If = 2A
Vf1
Vf2
Vf3
---
---
---
0.73
0.85
0.95
Volts
Instantaneous Forward Voltage Drop
(IF = 1A, 300 - 500 µsec pulse) TA = -55C
TA = 100C Vf4
Vf5 ---
--- 0.88
0.78 Volts
Reverse Leakage Current
(Vr = Rated Vr, TA = 25ºC, 300 µsec min pulse) Ir1 --- 100 µA
Reverse Leakage Current
(Vr = Rated Vr, TA = 100ºC, 300 µsec min pulse) Ir2 --- 2 mA
Junction Capacitance
(Vr=10 Vdc, TA=25ºC, f=1MHz) Cj --- 40 pF
Consult manufacturing for operating curves
DIMENSIONS
DIM MIN MAX
A 0.155” 0.185”
B 0.080” 0.107”
C 1.00” --
D .028” 0.32”
DIMENSIONS
DIM MIN MAX
A 0.200” 0.235”
B 0.125” 0.135”
C 0.020” 0.030”
D 0.002” --
Dimensions prior to solder dip
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0006E DOC