SACC-BP-F-M12/M15-6-THR - PHOENIX CONTACT

https://www.phoenixcontact.com/us/products/1414004

10/10/2016Page1/3

Housing screw connection-SACC-BP-F-M12/M15-6-THR-1414004

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1

Why buy this product

Easy device integration, thanks to mechanical port screw connections with threaded fastening

Flexible PCB assembly: two-piece connectors for wave and THR soldering

Key Commercial Data

Packing unit 1 STK

Minimum order quantity 20 STK

Weight per Piece (excluding packing) 10.000 g

Custom tariff number 79070000

Country of origin Germany

Technical data

Ambient conditions

Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)

-40 °C ... 85 °C (without mechanical actuation)

Degree of protection IP67

General

Note

The electrical and mechanical data specified assume that the connector

pair is correctly locked and mounted. If the connector is unlocked and if

there is a danger of contamination, the connector must be sealed using

a protective cap > IP54. Influences arising from litz wires, cables or PCB

assembly must also be taken into consideration.

Standards/regulations M12 connector IEC61076-2-101 In line with

Insertion/withdrawal cycles > 100

https://www.phoenixcontact.com/us/products/1414004

10/10/2016Page2/3

Housing screw connection-SACC-BP-F-M12/M15-6-THR-1414004

Technical data

General

Torque 1.5 Nm ... 2 Nm (Installation-side)

Mounting type Rear mounting M15 x 1 Spacing between the top edge of the PCB and the

back of the front plate: 6 mm

Material

Material, knurls Zinc die-cast, nickel-plated

Material Zinc die-cast (nickel-plated)

Sealing material FKM (O-ring on housing)

FKM (O-ring (pin connector pattern))

Additional material specifications Brass, nickel-plated (Locking nut)

Cable

Standards/specifications M12 connector IEC61076-2-101 In line with

Standards and Regulations

Standard designation M12 connector

Standards/regulations IEC61076-2-101

Drawings

Dimensional drawing

Ø13,5

M15x1

M12x1

13,8

1,5

Classifications

eCl@ss

eCl@ss 5.1 27143423

eCl@ss 6.0 27143423

eCl@ss 8.0 23100602

eCl@ss 9.0 23100602

ETIM

ETIM 4.0 EC001855

ETIM 5.0 EC002350

https://www.phoenixcontact.com/us/products/1414004

10/10/2016Page3/3

Housing screw connection-SACC-BP-F-M12/M15-6-THR-1414004

Approvals

EAC

Ex Approvals

Approval details

EACB.01742

Accessories

Panel mounting base

Sample set-SACC-BP-F-M12/M15-6-THR SP-1421801

Sample set, SocketLink:M12, Rear mounting, M15 x 1



http://www.phoenixcontact.com