https://www.phoenixcontact.com/us/products/1414004 Housing screw connection - SACC-BP-F-M12/M15-6-THR - 1414004 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1 Why buy this product Easy device integration, thanks to mechanical port screw connections with threaded fastening Flexible PCB assembly: two-piece connectors for wave and THR soldering Key Commercial Data Packing unit 1 STK Minimum order quantity 20 STK Weight per Piece (excluding packing) 10.000 g Custom tariff number 79070000 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 C ... 85 C (Plug / socket) -40 C ... 85 C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Standards/regulations M12 connector IEC 61076-2-101 In line with Insertion/withdrawal cycles > 100 10/10/2016 Page 1 / 3 https://www.phoenixcontact.com/us/products/1414004 Housing screw connection - SACC-BP-F-M12/M15-6-THR - 1414004 Technical data General Torque 1.5 Nm ... 2 Nm (Installation-side) Mounting type Rear mounting M15 x 1 Spacing between the top edge of the PCB and the back of the front plate: 6 mm Material Material, knurls Zinc die-cast, nickel-plated Material Zinc die-cast (nickel-plated) Sealing material FKM (O-ring on housing) FKM (O-ring (pin connector pattern)) Additional material specifications Brass, nickel-plated (Locking nut) Cable Standards/specifications M12 connector IEC 61076-2-101 In line with Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Drawings Dimensional drawing 18 O13,5 M15x1 13,8 M12x1 14 1,5 Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 8.0 23100602 eCl@ss 9.0 23100602 ETIM ETIM 4.0 EC001855 ETIM 5.0 EC002350 10/10/2016 Page 2 / 3 https://www.phoenixcontact.com/us/products/1414004 Housing screw connection - SACC-BP-F-M12/M15-6-THR - 1414004 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC B.01742 Accessories Accessories Panel mounting base Sample set - SACC-BP-F-M12/M15-6-THR SP - 1421801 Sample set, SocketLink:M12, Rear mounting, M15 x 1 Phoenix Contact 2016 (c) - all rights reserved http://www.phoenixcontact.com 10/10/2016 Page 3 / 3