ADVANCE INFORMATION TCXO (optional Voltage Control) 3V Ceramic SMD Technical Data S69 Series ACTUAL SIZE Description A surface mountable, temperature compensated crystal oscillator with voltage control option for 3 Volt operation. The miniature size, extremely low profile and low power consumption of this (V)TCXO make it ideally suited for compact or portable wireless/microwave networking and telecommunications. The hermetically sealed ceramic package is fully compatible with standard surface mounting processes. Frequency Range: 12.6 MHz to 26 MHz Frequency Stability: vs. temperature: 2.5ppm (as specified) vs. supply voltage (10% change): 0.3 ppm vs. aging: 1ppm @40C for one year vs. load: 0.3 ppm, (CL: 10pF 10%) vs. hysteresis: 0.2ppm (/t = 1C/min) vs. temp. cycles: 0.1ppm (10 cycles min-max storage temp.) vs. reflow: 1.5ppm max (room temp., nominal VC, second reflow) Perturbations: 0.5ppm peak-to-peak max Temperature Range: Operating: Storage: -30C to +85C (as specified) -40 to +90C Supply Voltage: 3.0V 10% Supply Current: 1.5mA max Output: Clipped Sinewave Level: Load: Pull Characteristics (if applicable): Rated Control Voltage (VC): Relative Pull Range (VC = 1.5V 1V): Input Impedance (pin 1): Modulation Bandwidth: Transfer Function: Applications & Features Phase Noise (typical): (offset from carrier) * * * * * * * * Mechanical: * * * * GPS/Navigation Mobile and Portable Radio/Telephone Communications Transceivers Commercial SATCOM Microwave transceivers Wireless networking/Digital datalinks 3 Volt operation Analog compensation for superb phase noise and tight stabilities Miniature 3.2 x 5 mm, very low profile 1.5 mm max height package Optional voltage control pin for frequency tuning Advanced lead-free design and manufacturing techniques Available on tape & reel; 16mm tape, 1000pcs per reel Environmental: Gross Leak Test: Fine Leak Test: Thermal Shock: Moisture Resistance: Part Numbering Guide 0.5V to 2.5V 5ppm(min) to 12ppm(max) 1M min, 2M typ 1 kHz min Frequency increases when control voltage increases < 15 MHz -75 dBc/Hz @ 10Hz -110 dBc/Hz @ 100Hz -130 dBc/Hz @ 1kHz -145 dBc/Hz @ 10kHz -145 dBc/Hz @ 100kHz MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2 (RI = 2x10-8 atm cc/s) MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 S69 6 9 S S V - 19.2000 (T) Temperature Stability 6 = 2.5ppm max Operating Temperature 9 = -30 to +85C Package Type S = Surface Mount 3.2 x 5mm ceramic 15MHz -70 dBc/Hz @ 10Hz -105 dBc/Hz @ 100Hz -125 dBc/Hz @ 1kHz -140 dBc/Hz @ 10kHz -145 dBc/Hz @ 100kHz MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J MIL-STD-883, Method 2004, Condition D Product Series Solder Reflow Guide Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: Terminal Strength: 0.8V peak-to-peak min 10K // 10pF Packaging Nominal Blank = Bulk Frequency, MHz (T) = Tape & Reel* *full reel increments only Relative Pulling Range Blank = TCXO, No Control Voltage V = Voltage Control on pin #1 (as rated) Output S = Clipped Sinewave www.pericom.com/saronix DS-251 REV 02 ADVANCE INFORMATION TCXO (optional Voltage Control) 3V Ceramic SMD Technical Data S69 Series Test Circuit Package Details 5.0 0.15 .197 .006 3.2 0.15 .126 .006 1.5 max .060 1.1 .043 0.8 .031 c 0.3 .012 1 1.6 .063 2 4 3 0.8 .031 0.2 CR .008 2.80 .110 Pin Functions: Pin 1: Control Voltage (TCXO- NC) Pin 2: GND Pin 3: Output Pin 4: VCC Recommended Land Pattern *All specfications subject to changes without notice www.pericom.com/saronix DS-251 REV 02