LITE-ON SEMICONDUCTOR SBL1630PT thru 1660PT REVERSE VOLTAGE - 30 to 60 Volts FORWARD CURRENT - 16 Amperes SCHOTTKY BARRIER RECTIFIERS TO-3P FEATURES Metal of silicon rectifier,majority carrier conducton Guard ring for transient protection Low power loss, high efficiency High current capability, low VF High surge capacity Plastic package has UL flammability classification 94V-0 For use in low voltage,high frequency inverters,free whelling,and polarity protection applications F E A P G Q O K PIN 2 1 B 3 D H C I N MECHANICAL DATA Case : TO-3P molded plastic Polarity : As marked on the body Weight : 0.2 ounces, 5.6 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) J L M L PIN 1 PIN 2 CASE PIN 3 TO-3P MIN. MAX. 15.75 16.25 21.25 21.75 20.10 19.60 3.78 4.38 1.88 2.08 4.87 5.13 4.4TYP. 1.90 2.16 2.93 3.22 1.12 1.22 2.90 3.20 5.20 5.70 2.10 2.40 0.76 0.51 2.18 1.93 DIM. A B C D E F G H I J K L M N O P Q 20 TYP 10 TYP All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TC=95 C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum forward Voltage at 8A DC ( Note 3) Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ =25 C @TJ =100 C Typical Thermal Resistance (Note 2) Storage Temperature Range SBL 1635PT 35 24.5 35 SBL 1640PT 40 28 40 SBL 1645PT 45 31.5 45 SBL 1650PT 50 35 50 SBL 1660PT 60 42 60 UNIT V V V I(AV) 16 A IFSM 175 A VF Typical Junction Capacitance per element (Note1) Operating Temperature Range VRRM VRMS VDC SBL 1630PT 30 21 30 0.70 0.55 V IR 0.5 50 mA CJ 500 pF R0JC 3.5 C/W TJ -55 to +125 C TSTG -55 to +150 C NOTES : 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Thermal Resistance Junction to Case. 3. 300us Pulse Width, 2% Duty Cycle. REV. 5,Oct-2010, KTHD01 RATING AND CHARACTERISTIC CURVES SBL1630PT thru SBL1660PT FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 16 12 8 4 RESISTIVE OR INDUCTIVE LOAD 0 25 50 75 100 125 150 175 175 150 125 100 75 50 8.3ms Single Half-Sine-Wave 25 1 2 5 CASE TEMPERATURE , C 50 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL REVERSE CHARACTERISTICS FIG.4 - TYPICAL FORWARD CHARACTERISTICS 1000 INSTANTANEOUS FORWARD CURRENT ,(A) 100 100 10 TJ = 100 C TJ = 75 C 1.0 0.1 TJ = 25 C 0.01 SBL1630PT ~ SBL1645PT 10 SBL1650PT ~ SBL1660PT 1.0 TJ = 25 C PULSE WIDTH 300us 2% Duty cycle 0.1 0 20 40 60 80 100 140 120 0.1 0.2 0.3 0.4 FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 100 TJ = 25 C, f= 1MHz 10 0.1 1 0.5 0.6 0.7 0.8 0.9 INSTANTANEOUS FORWARD VOLTAGE , VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE (%) CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(mA) 20 10 4 10 REVERSE VOLTAGE , VOLTS 100 1.0 Legal Disclaimer Notice SBL1630PT thru SBL1660PT Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.