7mm
9mm
1
Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
UX60S Series
2008.4
■Features
1. USB 2.0 Standard data transmission rate
Max. data transmission rate of 480 Mbps.
2. Reduced size – less board space
Reduction in the overall length (as compared with other
HRS versions) of the receptacle (7.0 mm) translates into
less board mounting space.
3. Board placement with automatic equipment
Flat top areas and packaging on tape-and-reel allows
use of vacuum pick-up nozzles.
Versions with heat resistant pick-up tape can be also
supplied.
4. RoHS compliant
All components and materials comply with the
requirements of EU Directive 2002/95/EC
■Applications
Personal computer peripheral equipment, data terminals,
portable terminals, digital cameras, and MP3 players and
other devices requiring use of Mini-B receptacles complying
with all requirements of USB 2.0 Standard.
Meets requirements of USB 2.0 Standard
USB 2.0 certified
Smaller size
Other HRS version
22% Volume Reduction
Ideal for the connection of personal computer peripherals
NEW
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
1.Contact resistance
2.Insulation resistance
3.
Withstanding voltage
4.Capacitance
5.Total insertion/
withdrawal force
6.Durability
(mating/unmating)
7.Vibration
8.Random vibration
9.Shock
10.Heat Shock
11.Temperature cycle
12.Salt spray
13.Solderablity
2
UX60S Series●Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
■Materials and Finish
100 mA
100 V DC
100 V AC / one minute
Measure between adjacent contacts at 1,000 ±10Hz
Measure with an applicable connector.
5,000 cycles
Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in
each of the 3 axial directions
Frequency 50 to 2,000 Hz, 3 directions for 15 minutes each.
Acceleration of 490m/s2, 11 ms continuous time, sine half-wave,
3 cycles in each of the 6 directions
7 cycles (168 hours) at -10 to 65ç, humidity of 90 to 98%
48 hours, 5% solution of salt water
Solder temperature 245ç, immersion time 2 to 3 seconds
50 mø max.
100 Mø min.
No flashover or insulation breakdown
2 pF max.
Insertion force : 35 N max.
Withdrawal force : 7 N min.
With corresponding HRS connector.
Contact resistance: 70 mø max.
Withdrawal force: 3 N min.
No electrical discontinuity of 1 μs or longer
No damage, cracks or parts dislocation.
Contact resistance: 70 mø max.
Insulation resistance: 10 Mø min. (when dry)
Contact resistance: 70 mø max.
Wet state, solder coverage area 95% min.
Item Specification Conditions
■Specifications
Temperature:-55
ç
/
+20
ç
to 35
ç
/
+85
ç
/
+20
ç
to 35
ç
Time: 30min.
/
2 to 3 min.
/
30 min.
/
2 to 3 minutes
10 cycles
Ratings Voltage rating 5 V AC
Current rating 1 A
Operating temperature range
Storage temperature range
-30 to +75ç
-40 to +85ç(Note 1)
Part
Insulator
Contacts
Shell
Synthetic resin
Copper alloy
Copper alloy
Color: Black
Contact area: Gold plated
Lead area: Gold plated
Tin plated
UL94V-0
---------------
---------------
Material Finish Remarks
Note 1: The term “storage” refers to connectors stored for a long period of time prior to mounting and use.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3
UX60S Series●Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
■Ordering information
●Latest Engineering Drawings containing more information may be requested using exact part numbers from individual
pages of this catalog.
UX60S C - MB - 5 S T
1 2 3 4 5 6
Series name UX60S (Mini - USB, Receptacle, reduced size)
Mating side configuration C : Standard
A : With interface entry angle
Connector style MB : Mini-B receptacle
Number of contacts 5
Contact type S : Female
Shell termination style T : SMT
8 : Solder, through hole (solder tab length 0.8mm)
1
2
3
4
5
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
4
UX60S Series●Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
(1.6)
(0.5) (1.5)
Vacuum pick-up area
1
1
1.8
5.1
7.7
(8.7)
9.9
3.9
(4.9)
6.5(0.64)
Contact
No.1 Contact
No.5
0.8
1.61.6
0.8
0.3
PCB edge
(0.5)
0.5
Outline of the
connector
1.6
0.8 0.8
1.6
3
7.7
5.9
10.9
4.9
8.7
1.3
0.8
1.8
5
5.6
6.5
5.1 1.4
2.1
3.6
: No conductive traces
B
Recommended PCB mounting pattern
■Recommended clearance areas
Dimensions shown in the shaded areas (in the illustrations below) must be free of any materials or components, as
this may interfere with the free movement of the ground contacts.
●Receptacle -With interface entry angle
Part No. CL No. RoHS
UX60SA-MB-5ST 240-0015-3 YES
BMated Assembly – Receptacle - with interface entry angle
Note 1: Tape and reel packaging (1,000 pieces/reel).
Order by number of reels.
(1.5)
Receptacle
Plug
(0.86)
2.3MIN
1MIN
4.7
Section A-A
0.35MIN
0.4MIN
5MIN
1.1MIN
A
A
A-A
All dimensions: mm
All dimensions: mm
●Shown for Reference
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
UX60S Series●Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
●Receptacle - Standard – Shell SMT
Part No. CL No. RoHS
UX60SC-MB-5ST 240-0016-6 YES
Note 1: Tape and reel packaging (1,000 pieces/reel).
Order by number of reels.
Vacuum pick-up area
(1.6)
(0.5) (1.5)
1
3.3 1
5.1
9.8
3.95
7
0.3
0.8
1.6
0.8
1.6
7.7
Contact
No.1 Contact
No.5
: No conductive traces
PCB edge
Outline of the
connector
3
5.9
10.9
(0.5)
1.3
0.8
1.8
5.6
7.7
2.1
3.6
5.4 1.4
0.5
0.80.8
1.6 1.6
B
Recommended PCB mounting pattern
Vacuum pick-up area
(1.6)
(1.5)
(0.5)
7.3
0.4
0.8
7.7
0.3
0.8
1.6
0.8
1.6
3.9
2.8
4.2
7
Contact
No.1 Contact
No.5
0.5
0.8
1.61.6
0.8
(0.5)
0.8
1.3
3.6
(Land)
0.7(Through hole)
1.1(Land)
5.4 1.4
3.6
R0.55(Land)
R0.35
(Through hole)
3.7
7.3
3.2
(Through hole)
3
7.7
5.9
2.1
: No conductive traces
PCB edge
Outline of the
connector
B
Recommended PCB mounting pattern
●Receptacle - Standard - Shell through Hole
Part No. CL No. RoHS
UX60SC-MB-5S8 240-0020-3 YES
Note 1: Tape and reel packaging (1,000 pieces/reel).
Order by number of reels.
All dimensions: mm
All dimensions: mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6
UX60S Series●Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
■Recommended clearance areas
Dimensions shown in the shaded areas (in the illustrations below) must be free of any materials or components, as
this may interfere with the free movement of the ground contacts.
(1.5)
Plug
Receptacle
0.35MIN
4.7
1MIN
2.3MIN
0.4MIN
5MIN
1.1MIN
BMated Assembly – Receptacle
All dimensions: mm
●Shown for Reference
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
7
UX60S Series●Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
BPackaging Specifications
BRecommended temperature profile
2
Ø1.5
12
11.5
1.75
22.25
24
4
Unreeling direction
●Embossed carrier tape dimensions
(Ø13)
(24.4)
(30.4)
(Ø380)
Unreeling direction
●Reel Dimensions
●Lead-free solder paste
Average slope
2ç / sec.
170±10ç
80~110S
230ç min.
MAX 50S
200ç min.
MAX 80S
Temperature:(ç)
250
230
200
170
Time (Seconds)
0
●HRS test condition
Solder composition : Paste Cu/ 96.5% Sn/3.0% Ag/0.5%
Test board : Glass epoxy 35mm
∞
35mm
∞
0.8mm thick
The temperature profile is based on the shown conditions. In
individual applications the temperature may vary, depending on
solder paste type, volume/thickness and board size/thickness.
Consult your solder paste and equipment manufacturer for
specific recommendations.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
