The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features Smaller size 1. USB 2.0 Standard data transmission rate Max. data transmission rate of 480 Mbps. 9mm 2. Reduced size - less board space Reduction in the overall length (as compared with other HRS versions) of the receptacle (7.0 mm) translates into less board mounting space. 3. Board placement with automatic equipment Flat top areas and packaging on tape-and-reel allows use of vacuum pick-up nozzles. Versions with heat resistant pick-up tape can be also supplied. 4. RoHS compliant 7mm Other HRS version 22% Volume Reduction All components and materials comply with the requirements of EU Directive 2002/95/EC Applications Ideal for the connection of personal computer peripherals Personal computer peripheral equipment, data terminals, portable terminals, digital cameras, and MP3 players and other devices requiring use of Mini-B receptacles complying with all requirements of USB 2.0 Standard. 2008.4 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeriesMini-B have been discontinued, or will be discontinued Pleasereceptacles check the products status onrequirements the Hirose website RoHS search2.0 at www.hirose-connectors.com, or contact your Hirose sales representative. UX60S Connectors, SMT soon. mount meeting of USB Standard Specifications Voltage rating 5 V AC Operating temperature range -30 to +75c Current rating 1A Storage temperature range -40 to +85c (Note 1) Ratings Item Specification Conditions 1.Contact resistance 50 mo max. 100 mA 2.Insulation resistance 100 Mo min. 100 V DC 3.Withstanding voltage No flashover or insulation breakdown 100 V AC / one minute 4.Capacitance 2 pF max. Measure between adjacent contacts at 1,000 10Hz 5.Total insertion/ withdrawal force Insertion force Withdrawal force 6.Durability (mating/unmating) With corresponding HRS connector. Contact resistance: 70 mo max. Withdrawal force: 3 N min. : 35 N max. : 7 N min. Measure with an applicable connector. 5,000 cycles Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axial directions 7.Vibration 8.Random vibration No electrical discontinuity of 1 s or longer No damage, cracks or parts dislocation. Frequency 50 to 2,000 Hz, 3 directions for 15 minutes each. Acceleration of 490m/s2, 11 ms continuous time, sine half-wave, 3 cycles in each of the 6 directions 9.Shock 10.Heat Shock Contact resistance: 70 mo max. Temperature:-55c / +20c to 35c / +85c / +20c to 35c Time: 30min. / 2 to 3 min. / 30 min. / 2 to 3 minutes 10 cycles 11.Temperature cycle Insulation resistance: 10 Mo min. (when dry) 7 cycles (168 hours) at -10 to 65c , humidity of 90 to 98% 12.Salt spray Contact resistance: 70 mo max. 48 hours, 5% solution of salt water 13.Solderablity Wet state, solder coverage area 95% min. Solder temperature 245c, immersion time 2 to 3 seconds Note 1: The term "storage" refers to connectors stored for a long period of time prior to mounting and use. Materials and Finish 2 Part Material Insulator Synthetic resin Contacts Shell Finish Remarks Color: Black UL94V-0 Copper alloy Contact area: Gold plated Lead area: Gold plated --------------- Copper alloy Tin plated --------------- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.SeriesMini-B Please check the products status on the SMT Hirose website search at www.hirose-connectors.com, or contact Hirose representative. UX60S Connectors, mountRoHS receptacles meeting requirements ofyour USB 2.0sales Standard Ordering information UX60S C - MB - 5 S T 1 2 3 4 5 6 1 Series name UX60S (Mini - USB, Receptacle, reduced size) 2 Mating side configuration C : Standard A : With interface entry angle 3 Connector style MB : Mini-B receptacle 4 Number of contacts 5 5 Contact type S : Female 6 Shell termination style T : SMT 8 : Solder, through hole (solder tab length 0.8mm) Latest Engineering Drawings containing more information may be requested using exact part numbers from individual pages of this catalog. 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeriesMini-B have been discontinued, or will be discontinued Pleasereceptacles check the products status onrequirements the Hirose website RoHS search2.0 at www.hirose-connectors.com, or contact your Hirose sales representative. UX60S Connectors, SMT soon. mount meeting of USB Standard Receptacle -With interface entry angle Part No. CL No. RoHS UX60SA-MB-5ST 240-0015-3 YES Note 1: Tape and reel packaging (1,000 pieces/reel). (0.5) BRecommended PCB mounting pattern 5.1 1 (1.5) 1.8 1 Order by number of reels. Vacuum pick-up area (1.6) 9.9 Contact No.1 : No conductive traces (0.64) 6.5 Contact No.5 (8.7) 7.7 3.9 (4.9) 0.8 0.5 Outline of the connector 3 5.9 7.7 10.9 6.5 0.8 1.3 PCB edge (0.5) 1.8 5.1 3.6 2.1 5 5.6 1.4 0.8 8.7 4.9 1.6 1.6 0.3 0.8 1.6 0.8 1.6 All dimensions: mm Recommended clearance areas Dimensions shown in the shaded areas (in the illustrations below) must be free of any materials or components, as this may interfere with the free movement of the ground contacts. A A 1MIN 2.3MIN 0.35MIN 1.1MIN 4.7 A-A 0.4MIN 5MIN Section A-A BMated Assembly - Receptacle - with interface entry angle Shown for Reference (1.5) (0.86) Receptacle Plug All dimensions: mm 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.SeriesMini-B Please check the products status on the SMT Hirose website search at www.hirose-connectors.com, or contact Hirose representative. UX60S Connectors, mountRoHS receptacles meeting requirements ofyour USB 2.0sales Standard Receptacle - Standard - Shell SMT Part No. CL No. RoHS UX60SC-MB-5ST 240-0016-6 YES Note 1: Tape and reel packaging (1,000 pieces/reel). BRecommended PCB mounting pattern 1.6 1.6 : No conductive traces 0.8 0.5 Contact No.1 5.1 1 3.3 Vacuum pick-up area (1.6) Contact No.5 9.8 7.7 7 3 5.9 7.7 10.9 Outline of the connector 0.8 (0.5) PCB edge 1.3 1.8 5.4 3.6 2.1 5.6 3.95 1.4 0.8 (0.5) (1.5) 1 Order by number of reels. 0.3 0.8 1.6 0.8 1.6 All dimensions: mm Receptacle - Standard - Shell through Hole Part No. CL No. RoHS UX60SC-MB-5S8 240-0020-3 YES Note 1: Tape and reel packaging (1,000 pieces/reel). BRecommended PCB mounting pattern : No conductive traces (0.5) (1.5) Order by number of reels. Vacuum pick-up area (1.6) Contact No.1 Contact No.5 7.7 7 0.4 7.7 0.8 1.3 3.7 7.3 (0.5) 3 5.9 3.2 (Through hole) 3.6 (Land) 7.3 0.7(Through hole) 1.1(Land) 0.8 1.6 0.8 R0 1.4 ) ole .35 ugh h 0 R ro (Th 5.4 3.6 2.1 PCB edge Outline of the connector 3.9 La nd 5( 0.8 0.5 .5 0.8 ) 1.6 1.6 0.3 0.8 1.6 2.8 4.2 All dimensions: mm 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeriesMini-B have been discontinued, or will be discontinued Pleasereceptacles check the products status onrequirements the Hirose website RoHS search2.0 at www.hirose-connectors.com, or contact your Hirose sales representative. UX60S Connectors, SMT soon. mount meeting of USB Standard Recommended clearance areas Dimensions shown in the shaded areas (in the illustrations below) must be free of any materials or components, as this may interfere with the free movement of the ground contacts. 4.7 0.4MIN 1.1MIN 0.35MIN 2.3MIN 5MIN 1MIN All dimensions: mm BMated Assembly - Receptacle Shown for Reference (1.5) Receptacle Plug 6 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.SeriesMini-B Please check the products status on the SMT Hirose website search at www.hirose-connectors.com, or contact Hirose representative. UX60S Connectors, mountRoHS receptacles meeting requirements ofyour USB 2.0sales Standard BPackaging Specifications Embossed carrier tape dimensions 12 Unreeling direction 1.75 4 .5 O1 22.25 24 11.5 2 Reel Dimensions (30.4) (O 13 ) (24.4) Unreeling direction (O 38 0) BRecommended temperature profile Lead-free solder paste Temperature:(c) 17010c 80~110S 230c min. MAX 50S 250 HRS test condition Solder composition : Paste Cu/ 96.5% Sn/3.0% Ag/0.5% Test board : Glass epoxy 35mm35mm0.8mm thick 230 200 170 200c min. MAX 80S 0 The temperature profile is based on the shown conditions. In individual applications the temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. Time (Seconds) Average slope 2c / sec. 7