THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2001 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
The Connor-Winfield FTHD686
is a surface mount
Crystal Controlled Oscillator
(XO) with Sinewave output.
Based on a fundamental
crystal design the FTHD686 is
designed for applications
requiring low noise, low jitter
and tight frequency stability.
5.0V,
12
FTHD686 - 100.00 MHz
CLOCK
SERIES
CENTER
FREQUENCY
5.0V OPERATION
SINEWAVE OUTPUT
FREQUENCY STABILITY: ±35ppm
TEMPERATURE RANGE: -40 to 85°C
SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
RoHS COMPLIANT / LEAD FREE
5.0V
HF SINEWAVE OSCILLATOR
Surface Mount
FTHD686
Sw045 03 01/31/07
ORDERING INFORMATION
FEATURES
DESCRIPTION
0705
FTHD686
100M
ABSOLUTE MAXIMUM RATINGS TABLE 1.0
PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE
Storage Temperature -55 - 125 °C
Supply Voltage (Vcc) -0.5 - 7.0 Vdc
OPERATING SPECIFICATIONS TABLE 2.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
Center Frequency (Fo) 50 - 100 MHz
Total Frequency Tolerance -35 35 ppm 1
Operating Temperature Range -40 - 85 °C
Supply Voltage (Vcc) 4.75 5.00 5.25 Vdc
Supply Current (Icc) - - 50 mA
Start-up Time @ 25°C - - 10 mS
PHASE NOISE CHARACTERISTICS TABLE 3.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
SSB Phase Noise at 10Hz offset - -60 - dBc/Hz
SSB Phase Noise at 100Hz offset - -90 - dBc/Hz
SSB Phase Noise at 1KHz offset - -110 - dBc/Hz
SSB Phase Noise at 10KHz offset - -135 - dBc/Hz
SSB Phase Noise at 100KHz offset - -145 - dBc/Hz
SINEWAVE OUTPUT CHARACTERISTICS TABLE 4.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
LOAD - - 50 ohm
Voltage 2 3 4 dBm
Voltage vs. Supply Voltage Change -1 - 1 dBm
SPURIOUS CHARACTERISTICS TABLE 5.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
Harmonics - --20 dBm
Sub Harmonics - - -70 dBm
PACKAGE CHARACTERISTICS TABLE 6.0
Package Non-hermetic package consisting of an FR4 substrate with grounded metal
cover.
PROCESS RECOMMENDATIONS TABLE 7.0
Solder Reflow See solder profile page 2.
Wash Ultrasonic cleaning is not recommended.
Notes
1.0 Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and aging
fifteen years.
PRODUCT DATA SHEET
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2001 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
22
Sw045 03 01/31/07
N/C
HF OUTPUT
PIN
1
2
3
4
CONNECTION
GROUND
Vcc
N/C
50 ohm
FTHD686
100.00MHz
FTHD686
100.00MHz
DATE CODEDATE CODE
.140
(3.56mm)
MAX
Package Outline Pin Connections
1
2
3
4
Suggested Pad Layout Solder Profile
Test Circuit
120°C
150°C
180°C
260°C
0
220°C
360 Sec. Max.
120 S
Max. 10 S
60 S
Max.
Time
Temperature 260°C
PRODUCT DATA SHEET
