100W Constant Voltage + Constant Current LED Driver HVG-100 series
■Description
Wide input range 180 ~ 528VAC
Constant Voltage + Constant Current mode output
Metal housing with Class designⅠ
Built-in active PFC function
Class 2 power unit
IP67 / IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer;
3 in 1 dimming (dim-to-off); Timer dimming
Typical lifetime>50000 hours
5 years warranty
LED street lighting
LED high-bay lighting
Parking space lighting
LED fishing lamp
LED greenhouse lighting
Type HL for use in Class , Division 2Ⅰ
hazardous (Classified) location.
■Features ■Applications
DIP67 Built-in Smart timer dimming function by user request. By request
IP65 IP67
Type HL
HVG-100 series is a 100W AC/DC LED driver featuring the dual mode constant voltage and constant
current output. HVG-100 operates from VAC and offers models with different rated voltage180~528
ranging between 15V and 54V. Thanks to the high efficiency up to 91%, with the fanless design, the
entire series is able to operate for -40 ~ +90 case temperature under free air convection. The design℃℃
of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor
applications. HVG-100 is equipped with various function options, such as dimming methodologies, so as
to provide the optimal design flexibility for LED lighting system.
■Model Encoding
-20HVG - 100 A
Rated output voltage(15/20/24/30/36/42/48/54V)
Rated wattage
Series name
Function options
Type
A
B
IP Level
IP65
IP67
Io and Vo adjustable through built-in potentiometer.
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
Function Note
In Stock
In Stock
File Name:HVG-100-SPEC 2018-09-30
AB IP65 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
Io and Vo adjustable through built-in potentiometer & In Stock
SPECIFICATION
100W Constant Voltage + Constant Current LED Driver HVG-100 series
MODEL
DC VOLTAGE
RATED CURRENT
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
CURRENT ADJ. RANGE
LINE REGULATION
LOAD REGULATION
HOLD UP TIME (Typ.)
VOLTAGE RANGE Note.5
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVER CURRENT
OVER VOLTAGE
OVER TEMPERATURE
47 ~ 63Hz
0.38A / 347VAC 0.28A / 480VAC
<0.75mA / 480VAC
95 ~ 108%
20 ~ 95% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH℃
±℃ ℃0.03%/ (0 ~ 60 )
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
174.9K hrs min. MIL-HDBK-217F (25 )℃
236*68*38.8mm (L*W*H)
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
ENVIRONMENT
SAFETY &
EMC
PROTECTION
Shut down o/p voltage, recovers automatically after temperature goes down
SHORT CIRCUIT
18 ~ 21V 28 ~ 34V23 ~ 27V 34 ~ 38V 41 ~ 46V 54 ~ 60V
47 ~ 53V 59 ~ 65V
89% 91% 91% 91%90.5% 91%
±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
±1.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
±1.0%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%
15V
HVG-100-15 HVG-100-20 HVG-100-24 HVG-100-30 HVG-100-36 HVG-100-42 HVG-100-48 HVG-100-54
24V 30V 48V
150mVp-p 150mVp-p
13.5 ~ 17V 17 ~ 22V
150mVp-p
22 ~ 27V
200mVp-p
27 ~ 33V
200mVp-p
33 ~ 40V
200mVp-p
43 ~ 53V
54V
200mVp-p
49 ~ 58V
42V
200mVp-p
38 ~ 46V
Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
Shut down o/p voltage with auto-recovery or re-power on to recovery
2.75 ~ 5A 2.64 ~ 4.8A 2.2 ~ 4A 1.76 ~ 3.2A 1.45 ~ 2.65A 1.1 ~ 2A 0.97 ~ 1.77A
1.25 ~ 2.28A
5A 3.2A 2.65A 2A
75W 96W 96W 95.4W 96W
1.77A
95.58W
2.28A
95.76W
1.18Kg; 12pcs/15.2Kg/0.74CUFT
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
UL8750(type”HL”), CSA C22.2 No. 250.0-08, EAC TP TC 004 IP65 or IP67 approved,
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
90% 90.5%
20V 36V
4.8A 4A
96W
Compliance to EN55015, EN61000-3-2 Class C ( 50% load, 60% only for 15V model) ; EN61000-3-3, FCC Part 15 Subpart B,≧≧ EAC TP TC 020@ load @ load
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level surge immunity Line-Earth 4KV, Line-Line 2KV , EAC TP TC 020()
EMC IMMUNITY
EMC EMISSION
COLD START 25A(t =900 s measured at 50% I ) at 480VAC;
width peak Per NEMA 410
μ
TOTAL HARMONIC DISTORTION
MAX. No. of PSUs on 16A
CIRCUIT BREAKER 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 480VAC
CONSTANT CURRENT REGION
Note.4
9~15V 10~20V 12~24V 15~30V 18~36V 21~42V 24~48V 27~54V
THD< 20%(@ load 50%/230VAC, 277VAC, 347VAC [@ load 60% only for 15V model]; @ load 75%/480VAC)≧≧≧
(Please refer to “TOTAL HARMONIC DISTORTION ” section)(THD)
File Name:HVG-100-SPEC 2018-09-30
Adjustable for A/AB-Type only (via the built-in potentiometer)
Adjustable for A/AB-Type only (via the built-in potentiometer)
SETUP, RISE TIME Note.6
30ms/347VAC, 480VAC
500ms, 80ms /230VAC, 347VAC, 480VAC
180 ~ 528VAC 254VDC ~ 747VDC
(Please refer to "STATIC CHARACTERISTIC" section)
PF 0.98/230VAC, PF 0.98/277VAC, PF 0.97/347VAC, PF 0.93/480VAC @full load≧≧≧≧
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
Tcase=-40 ~ +90 (Please refer to "OUTPUT LOAD vs TEMPERATURE" section)℃
MAX. CASE TEMP. Tcase=+90℃
1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to "DRIVING METHODS OF LED MODULE".
5. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
8. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less.℃
9. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com.
10. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
11. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Block Diagram
100W Constant Voltage + Constant Current LED Driver HVG-100 series
File Name:HVG-100-SPEC 2018-09-30
DRIVING METHODS OF LED MODULE
Typical output current normalized by rated current (%)
※This series is able to work in either Constant Current mode (a direct drive way) or
Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.
Fosc : 80KHz
DIM+
(B Type)
DIM-
DETECTION
PWM & PFC CIRCUIT
O.L.P.
EMI FILTER
RECTIFIERS
POWER
SWITCHING
FILTER
&
RECTIFIERS +V
-V
I/P
FG
CONTROL
O.V.P.
&
O.L.P.
PFC
CIRCUIT
PFC
CONTROL
O.T.P.
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
Should there be any compatibility issues, please contact MEAN WELL.
Vo(%)
100
50 100 Io (%)
Constant
Voltage area Constant
Current region
(A) (B)
100W Constant Voltage + Constant Current LED Driver HVG-100 series
File Name:HVG-100-SPEC 2018-09-30
DIMMING OPERATION
◎Applying additive 0 ~ 10VDC
◎Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
◎Applying additive resistance:
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< out<8%.I
2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.Ω
+V
-V
DIM+
DIM-
++
+
--
-
“DO NOT connect "DIM- to -V"
Additive Voltage
+V
-V
DIM+
DIM-
++
--
“DO NOT connect "DIM- to -V"
Additive PWM signal
+V
-V
DIM+
DIM-
++
--
“DO NOT connect "DIM- to -V"
Additive Resistance
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
0%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
Dimming input: Additive voltage
Duty cycle of additive 10V PWM signal dimming input
※3 in 1 dimming function (for B/AB-Type)
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable with additional drivers.to be used
Dimming source current from power supply: 1 0 A (typ.)0μ
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Short
10K/N
Output current (%)
20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for synchronized )dimming operation
Dimming input: Additive resistance
HVG-100
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue) -V(Black)
+V(Red)
DIM+(Blue)
DIM-(White)
0
5
10
15
20
25
50% 60% 70% 80% 90% 100%
230VAC
277VAC
347VAC
480VAC
0.80
0.82
0.84
0.86
0.88
0.90
0.92
0.94
0.96
0.98
1.00
50% 60% 70% 80% 90% 100%
480V
347V
277V
230V
100W Constant Voltage + Constant Current LED Driver HVG-100 series
File Name:HVG-100-SPEC 2018-09-30
PF
LOAD (100W)
OUTPUT LOAD vs TEMPERATURE(Note.9)
STATIC CHARACTERISTIC
TOTAL HARMONIC DISTORTION (THD)
POWER FACTOR (PF) CHARACTERISTIC
Tcase ( )℃
LOAD (%)
(HORIZONTAL)
EFFICIENCY vs LOAD
HVG-100 series possess superior working efficiency that up to 91% can
be reached in field applications.
-40 -25 0 20 45 55 65 75 90
20
40
60
80
100
※48V Model, Tcase at 80℃※48V Model, Tcase at 80℃
EFFICIENCY(%)
LOAD
※Tcase at 80℃
THD(%)
LOAD
INPUT VOLTAGE (V) 60Hz
180 347 480 528
100
90
80
70
60
50
40
440
LOAD (%)
Constant Current Mode
LOAD (%)
-40 -25 -10 0 15 30 50 60 70
20
40
60
80
100
(HORIZONTAL)
0.60
0.64
0.68
0.72
0.76
0.80
0.84
0.88
0.92
0.96
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
480V
347V
277V
230V
AMBIENT TEMPERATURE,Ta ( )℃
100W Constant Voltage + Constant Current LED Driver HVG-100 series
File Name:HVG-100-SPEC 2018-09-30
LIFE TIME
0
20
40
60
80
100
120
20 30 40 50 60 70 80 90
Tc a s e )(℃
LIFETIME(Kh)
Case No. 994 Unit:mm
※B-Type
100W Constant Voltage + Constant Current LED Driver HVG-100 series
File Name:HVG-100-SPEC 2018-09-30
※A-Type
tc
tc
MECHANICAL SPECIFICATION
236
212
104.4
34
-V(Black)
+V(Red)
300 20±
FG (Green/Yellow)
SVT 18AWG 2C×
STW 18AWG 3C×
236
212
AC/L(Brown)
AC/N(Blue)
12
9.6
9.49.4 34.2
68
ψ×4.2 4PL
300 20±
38.8
Vo
ADJ.
Io
ADJ.
104.4
34
-V(Black)
+V(Red)
300 20±
38.8
STW 18AWG 3C×
12
9.6
9.49.4 34.2
68
ψ×4.2 4PL
300 20±
DIM+(Blue)
DIM-(White)
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
UL2517 18AWG 2C×
SVT 18AWG 2C×
: Max. Case Temperature
: Max. Case Temperature
tc
tc
※AB-Type
※D-Type
100W Constant Voltage + Constant Current LED Driver HVG-100 series
File Name:HVG-100-SPEC 2018-09-30
tc
tc
236
212
104.4
34
-V(Black)
+V(Red)
300 20±
FG (Green/Yellow)
SVT 18AWG 2C×
STW 18AWG 3C×
236
212
AC/L(Brown)
AC/N(Blue)
12
9.6
9.49.4 34.2
68
ψ×4.2 4PL
300 20±
38.8
104.4
34
-V(Black)
+V(Red)
300 20±
38.8
STW 18AWG 3C×
12
9.6
9.49.4 34.2
68
ψ×4.2 4PL
300 20±
DIM+(Blue)
DIM-(White)
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
UL2517 18AWG 2C×
SVT 18AWG 2C×
: Max. Case Temperature
: Max. Case Temperature
tc
tc
Vo
ADJ.
Io
ADJ.
100W Constant Voltage + Constant Current LED Driver HVG-100 series
File Name:HVG-100-SPEC 2018-09-30
Please refer to : http://www.meanwell.com/manual.html
INSTALLATION MANUAL
※Waterproof connector
Waterproof connector can be assembled on the output cable of HVG-100 to operate in dry/wet/damp or outdoor environment.
LED Lamp
※Cable Joiner
※Junction Box Option
Pin Configuration (Female) Pin Configuration (Female)
Size Size
M12 M15
4-PIN
5A/PIN
M12-04Order No. Order No.
10A max.Suitable Current Suitable Current
5-PIN
5A/PIN
M12-05
10A max.
2-PIN
12A/PIN
M15-02
12A max.
Up to four wires can be connected through this cable joiner by
soldering or clamping by tools.
66
26 20
ψ25
CJ04-2 suitable for 18AWG~22AWG
CJ04-1 suitable for 14AWG~16AWG
LED Lamp
WATERPROOF CONNECTION
◎CJ04 cable joiner can be purchased independently for user's own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
HVG-100
I/P
O/P
AC
source
O/P Wires
HVG-100
◎A- typeOptional junction box available for , please contact MEAW WELL for details.
150 20±
3- PF 1/2"
86
76
5
10
38.8
35
2- 5ψ
61
32 8.58.5
6
212
374
150 20±
3- PF 1/2"
68
SVT 18AWG 2C×
STW 18AWG 3C×
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue) +V(Red)
-V(Black)
