PNP High Power Silicon Transistor 2N3791 & 2N3792 Features * Available in JAN, JANTX, and JANTXV per MIL-PRF-19500/379 * TO-3 (TO-204AA) Package Maximum Ratings Symbol 2N3791 2N3792 Units Collector - Emitter Voltage Ratings VCEO 60 80 Vdc Collector - Base Voltage VCBO 60 80 Vdc Emitter - Base Voltage VEBO 7.0 Vdc Base Current IB 4.0 Adc Collector Current IC 10 Adc Total Power Dissipation @ TA = +25 C (1) @ TC = +100 C (2) PT 5.0 85.7 W W Top, Tstg -65 to +200 C Operating & Storage Temperature Range Thermal Characteristics Characteristics Thermal Resistance, Junction-to-Case Symbol Maximum Units RJC 1.1 C/W 1) Derate linearly @ 28.57 mW/C for TC > +25C Electrical Characteristics (TC = 25C unless otherwise noted) OFF Characteristics Symbol Mimimum Maximum Units V(BR)CEO 60 80 --- Vdc 2N3791 2N3792 ICEX --- 20 20 Adc 2N3791 2N3792 ICBO --- 20 20 Adc IEBO --- 5.0 mAdc Collector - Emitter Breakdown Voltage IC = 10 mAdc 2N3791 2N3792 Collector - Emitter Cutoff Current VCE = 60 Vdc, VBE = 1.5 Vdc VCE = 80 Vdc, VBE = 1.5 Vdc Collector - Base Cutoff Current VCB = 60 Vdc VCB = 80 Vdc Emitter - Base Cutoff Current VEB = 7.0 Vdc Revision Date: 1/5/2012 New Product 1 2N3791 & 2N3792 Electrical Characteristics -con't ON Characteristics (3) Symbol Minimum 50 150 HFE 30 120 10 --- 5 --- Forward Current Transfer Ratio IC = 1.0 Adc, VCE = 2.0 Vdc IC = 3.0 Adc, VCE = 2.0 Vdc IC = 5.0 Adc, VCE = 2.0 Vdc IC = 10.0 Adc, VCE = 4.0 Vdc Maximum Unit Collector - Emitter Saturation Voltage IC = 5.0 Adc, IB = 0.5 Adc IC = 10.0 Adc, IB = 2.0 Adc VCE(sat) ----- 1.0 2.5 Vdc Base - Emitter Saturation Voltage IC = 5.0 Adc, IB = 0.5 Adc IC = 10.0 Adc, IB = 2.0 Adc VBE(sat) --- 1.5 3.0 Vdc | hfe | 4 20 hfe 30 300 Cobo --- 500 DYNAMIC Characteristics Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 0.5 A, VCE = 10.0 Vdc, f = 1 MHz Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 0.5 Adc, VCE = 10.0 Vdc, f = 1.0 kHz Output Capacitance VCB = 10 Vdc, IE = 0, 100 kHz f 1.0 MHz pF SAFE OPERATING AREA DC Tests: TC = +25 C, 1 Cycle, t = 1.0 s Test 1: VCE = 15.0 Vdc, IC = 10.0 Adc VCE = 40 Vdc, IC = 3.75 Adc Test 2: Test 3: VCE = 55 Vdc, VCE = 65 Vdc, IC = 0.9 mAdc IC = 0.9 mAdc 2N3791 2N3792 (3) Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. 2 603-641-3800 * 888-641--SEMI (7364) * metelics-sales@aeroflex.com * www.aeroflex.com/metelics Revision Date: 1/5/2012 2N3791 & 2N3792 Outline Drawing NOTE: Dimensions in Inches [mm] Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001: 2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelics-hirelcomponents www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2011 Aeroflex / Metelics. All rights reserved. Revision Date: 1/5/2012 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.