19013 36th Ave. West Suite H Lynnwood, WA 98036, USA VC2, VC3 VCXO Series 6 Pad Leadless Surface Mount Voltage Controlled Xtal Oscillator CMOS/ TTL Compatible (VC2 without E/D, VC3 with E/D) 1.500 MHz - 200.00 MHz Standard Specifications Overall Frequency Stability Operating Temperature Range Supply Voltage (Vcc) Output Load Control Voltage Range (CVR) Pullablity over CVR Linearity VC3 Enable/Disable Option (E/D) 15, 25, 50, 100 PPM over Operating Temperature Range 0 to +70C is standard, but can be extended to - 40 to +85C for certain frequencies 5.0 volts and 3.3 volts available Std load is 15pF max., see Test Circuit 7 for VC2, TC 8 for VC3 (consult factory for heavier loads) 0.5 to 4.5 volts for 5.0 volt Supply; 0.3 to 3.0 volts for 3.3 volt Supply 25, 50, 100, 150, 200 PPM. Consult factory for 300 PPM. 10% (Consult factory for 5%) Output enabled when Pin #2 is open or at Logic "1"; Output disabled when Pin #2 is at Logic "0". Frequency Range (MHz) 1.500 - 20.001 - 30.001 - 50.001 - 60.001 - 20.000 30.000 50.000 60.000 200.00 Supply Current Icc (mA) Typical Maximum 10 15 20 25 25 30 30 35 Consult Factory for values Rise and Fall Time Tr & Tf (nS) Typical Maximum 3.5 3.0 3.0 2.5 5.0 4.5 4.0 3.5 Part Numbering Guide Packaging Tube or 24mm tape 16mm pitch 3 VC22H 100 A Z - 60.0M Supply Voltage Blank= 5.0 volts 5% 3= 3.3 volts 5% Frequency in MHz Model VC22H=without E/D VC32H=with E/D Frequency Deviation (Pullability) over CVR T: 25 PPM X: 150 PPM V: 50 PPM Y: 200 PPM W: 100 PPM Z: 300 PPM Frequency Stability 15: 15 PPM 25: 25 PPM 50: 50 PPM 100: 100 PPM Operating Temperature Range A: 0 to +50C D: -20 to +75C B: 0 to +70C E: -30 to +75C C: -10 to +70C F: -40 to +85C Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned. Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load Mechanical: inches (mm) not to scale VC3 Solder Pads VC2 Solder Pads Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code. PLE .560 (14.23) MAX 4 N.C. Vcc 5 6 6 3 2 1 GND * Vcon 5 4 .05 (1.3) 1 2 3 .200 (5.08) *VC32H: Pin 2 E/D *VC22H: Pin 2 N.C. (do NOT connect to Pin 2) 4 6 .12 .23 (3.0) (5.8) OUT .12 .23 (3.0) (5.8) .400 (10.16) MAX .195 (4.95) MAX .05 (1.3) 1 3 .200 (5.08) Jan 2002 Pl tronics, Inc. (425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com 25