VC2, VC3 VCXO Series
6 Pad Leadless Surface Mount Voltage Controlled Xtal Oscillator
CMOS/ TTL Compatible (VC2 without E/D, VC3 with E/D)
Standard Specifications
Overall Frequency Stability ± 15, 25, 50, 100 PPM over Operating Temperature Range
Operating Temperature Range 0 to +70°C is standard, but can be extended to -40 to +85°C for certain frequencies
Supply Voltage (Vcc) 5.0 volts and 3.3 volts available
Output Load Std load is 15pF max., see Test Circuit 7 for VC2, TC 8 for VC3 (consult factory for heavier loads)
Control Voltage Range (CVR) 0.5 to 4.5 volts for 5.0 volt Supply; 0.3 to 3.0 volts for 3.3 volt Supply
Pullablity over CVR ± 25, 50, 100, 150, 200 PPM. Consult factory for ± 300 PPM.
Linearity ± 10% (Consult factory for ± 5%)
Supply Current
Icc (mA) Rise and Fall Time
Tr & Tf (nS)
Frequency Range
(MHz) Typical Maximum Typical Maximum
1.500 – 20.000 10 15 3.5 5.0
20.001 – 30.000 20 25 3.0 4.5
30.001 – 50.000 25 30 3.0 4.0
50.001 – 60.000 30 35 2.5 3.5
Part Numbering Guide
Model
Frequency Stability
Frequency in MHz
Frequency Deviation (Pullability) over CVR
3 VC22H 100 A Z - 60.0M
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
T: ± 25 PPM
V: ± 50 PPM
W: ± 100 PPM
19013 36th Ave. West Suite H Lynnwood, WA 98036, USA
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com 25
Jan 2002
Pl tronics, Inc.
Mechanical: not to scale
inches (mm)
VC22H=without E/D
VC32H=with E/D X: ± 150 PPM
Y: ± 200 PPM
Z: ± 300 PPM
Operating Temperature Range
A: 0 to +50°C
B: 0 to +70°C
C: -10 to +70°C
D: -20 to +75°C
E: -30 to +75°C
F: -40 to +85°C
25: ± 25 PPM
50: ± 50 PPM
100: ± 100 PPM
15: ± 15 PPM
Supply Voltage
Blank= 5.0 volts ±5%
3= 3.3 volts ±5%
VC3 Enable/Disable Option (E/D) Output enabled when Pin #2 is open or at Logic “1”; Output disabled when Pin #2 is at Logic “0”.
60.001 – 200.00 Consult Factory for values
VC3 Solder Pads VC2 Solder Pads
Packaging
Tube or
24mm tape
16mm pitch
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
1.500 MHz – 200.00 MHz
.400 (10.16) MAX
.560 (14.23) MAX
Vcc
*VC22H: Pin 2 N.C. (do NOT connect to Pin 2)
GND
OUT
4 5 6
3 2 1
PLE 4
.200 (5.08)
5
1 2
N.C.
Vcon 3
6
.195 (4.95)
MAX
.23
(5.8)
.05
(1.3)
.12
(3.0)
*VC32H: Pin 2 E/D
*
4
.200 (5.08)
1 3
6
.23
(5.8)
.05
(1.3)
.12
(3.0)
