www.vishay.com For technical questions, contact: filmresistors.leaded@vishay.com Document Number: 28727
80 Revision: 10-Mar-08
MPR24
Vishay BCcomponents
High Precision Leaded Resistors
DESCRIPTION
A homogenous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting wires of electrolytic
copper are welded to the end-caps. The resistors are coated
with lacquer which provides electrical, mechanical, and
climatic protection.
FEATURES
•High precision resistors
(TCR up to ± 5 ppm/K, 0.01 % tol.)
•High stability (0.05 %)
•Low temperature coefficient (up to ± 5 ppm/K)
•Lead (Pb)-free solder contacts
•Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
•Compatible with “Restriction of the use of Hazardous
Substances” (RoHS) directive 2002/95/EC (issue 2004)
APPLICATIONS
•Test and measurement
•Telecom
TECHNICAL SPECIFICATIONS
DESCRIPTION MPR24
CECC Size, DIN Size B, 0207
Resistance Range 10 Ω to 1 MΩ
Resistance Tolerance ± 0.05 %; ± 0.02 %; ± 0.01 % ± 0.5 %; ± 0.25 %; ± 0.1 %
Temperature Coefficient ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K; ± 05 ppm/K
Climatic Category (LCT/UCT/Days) 55/125/56 55/155/56
Max. Rated Dissipation, P70 0.125 W 0.25 W
Operating Voltage, Umax. AC/DC 250 V
Film Temperature 125 °C 155 °C
Max. Resistance Change for Resistance Range,
ΔR max., After:
Load ± (0.05 % R+ 0.01 Ω)
Climatic Tests ± (0.05 % R+ 0.01 Ω)
Soldering ± (0.01 % R + 0.01 Ω)
Short Time Overload ± (0.01 % R + 0.01 Ω)
Permissible Voltage Against Ambient :
1 Min; Uins 500 V
Continuous 75 V
Failure Rate ≤ 0.3 x 10- 9/h
Document Number: 28727 For technical questions, contact: filmresistors.leaded@vishay.com www.vishay.com
Revision: 10-Mar-08 81
MPR24
High Precision Leaded Resistors Vishay BCcomponents
12NC INFORMATION
Components may be ordered by using either a simple clear
text ordering code, see “Type Description and Ordering
Code” or Vishay BCcomponents’ unique 12NC.
•The resistors have a 12-digit numeric code starting with
2322 14.
•The subsequent 3 digits indicate the resistor type,
specification and packaging; see the 12NC table.
•The remaining 3 digits indicate the resistance value. The
number is available upon request and is fixed by the
supplier.
12NC Example
The 12NC of an MPR24 resistor with tolerance of ± 0.02 %
and TCR ± 05 ppm/K, taped on bandolier in box of 100 units
starts with 2322 141 77...; the last 3 digits are available upon
request and are fixed by the supplier.
12NC - resistor type and packaging
DESCRIPTION
ORDERING CODE 2322 14. .....
BANDOLIER IN BOX BANDOLIER IN BOX BANDOLIER ON REEL
TYPE TCR TOL. 100 units 1000 units 5000 units
MPR24
± 25 ppm/K
± 0.5 % 1 00... 1 10... 3 10...
± 0.25 % 1 20... 1 30... 3 30...
± 0.1 % 1 40... 1 50... 3 50...
± 0.05 % 1 64... 3 64... -
± 0.02 % 1 74... 3 74... -
± 0.01 % 1 84... 3 84... -
± 15 ppm/K
± 0.5 % 1 05... 1 15... 3 15...
± 0.25 % 1 25... 1 35... 3 35...
± 0.1 % 1 45... 1 55... 3 55...
± 0.05 % 1 65... 3 65... -
± 0.02 % 1 75... 3 75... -
± 0.01 % 1 85... 3 85... -
± 10 ppm/K
± 0.5 % 1 06... 1 16... 3 16...
± 0.25 % 1 26... 1 36... 3 36...
± 0.1 % 1 46... 1 56... 3 56...
± 0.05 % 1 66... 3 66... -
± 0.02 % 1 76... 3 76... -
± 0.01 % 1 86... 3 86... -
± 5 ppm/K
± 0.5 % 1 07... 1 17... 3 17...
± 0.25 % 1 27... 1 37... 3 37...
± 0.1 % 1 47... 1 57... 3 57...
± 0.05 % 1 67... 3 67... -
± 0.02 % 1 77... 3 77... -
± 0.01 % 1 87... 3 87... -
www.vishay.com For technical questions, contact: filmresistors.leaded@vishay.com Document Number: 28727
82 Revision: 10-Mar-08
MPR24
Vishay BCcomponents High Precision Leaded Resistors
Notes:
(1) Please refer to table PACKAGING for complete information
• The PART NUMBER is shown to facilitate the introduction of a unified part numbering system for ordering products
DIMENSIONS
SCRIPT MARKING (2)
Note:
(2) Resistors of TCR ± 25 ppm/K in combination with tolerances ± 0.5 %, ± 0.25 % and ± 0.1 % are only available with color coding in accordance
with IEC 60062
.
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: MPR24000E1001DC100
MPR24000E1001DC100
MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PAC K AG ING (1) SPECIAL
MPR2400 0 = Neutral Z = ± 5 ppm/K
Y = ± 10 ppm/K
X = ± 15 ppm/K
E = ± 25 ppm/K
3 digit value
1 digit multiplier
MULTIPLIER
9 = *10-1 2 = *102
0 = *100 3 = *103
1 = *101 4 = *104
T = ± 0.01 %
H = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
RP
CU
C1
Up to 2 digits
00 = Standard
PRODUCT DESCRIPTION: MPR24 - 25 0.5 % C1 1K0
MPR24 25 0.5 % C1 1K0
MODEL/SIZE TCR TOLERANCE PACKAGING (1) RESISTANCE VALUE
MPR24 Z = 5 ppm
Y = 10 ppm
X = 15 ppm
E = 25 ppm
± 0.01 %
± 0.02 %
± 0.05 %
± 0.1 %
± 0.25 %
± 0.5 %
RP
CU
C1
1K0 = 1 kΩ
50R5 = 50.5 Ω
L
d
D
II
M
DIMENSIONS - leaded resistor types, mass and relevant physical dimensions
TYPE Dmax.
(mm)
Lmax.
(mm)
dnom.
(mm)
Imin.
(mm)
Mmin.
(mm)
MASS
(mg)
MPR 24 2.5 6.3 0.6 28.0 7.5 220
TEMPERATURE COEFFICIENT AND TOLERANCE - printed resistance value and letter coding
RESISTANCE
VALUE
TOL.
(%)
LETTER
CODE
TCR
(ppm/K)
LETTER
CODE
Clear text code for value
± 0.5 D ± 25 E
± 0.25 C ± 15 F
± 0.1 B ± 10 B
± 0.05 A ± 05 A
± 0.02 P - -
± 0.01 T - -
Document Number: 28727 For technical questions, contact: filmresistors.leaded@vishay.com www.vishay.com
Revision: 10-Mar-08 83
MPR24
High Precision Leaded Resistors Vishay BCcomponents
Notes:
(1) The temperature coefficient is specified over the temperature range + 20 °C to + 70 °C.
(2) Resistance values to be selected from E192 series, for other values please contact the factory.
FUNCTIONAL PERFORMANCE
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION RESISTANCE VALUE (2)
TCR (1) TOLERANCE MPR24
± 25 ppm/K
± 0.5 % 10 Ω to 1 MΩ
± 0.25 % 10 Ω to 1 MΩ
± 0.1 % 10 Ω to 1 MΩ
± 0.05 % 24 Ω to 100 kΩ
± 0.02 % 24 Ω to 100 kΩ
± 0.01 % 24 Ω to 100 kΩ
± 15 ppm/K
± 0.5 % 10 Ω to 1 MΩ
± 0.25 % 10 Ω to 1 MΩ
± 0.1 % 10 Ω to 1 MΩ
± 0.05 % 24 Ω to 100 kΩ
± 0.02 % 24 Ω to 100 kΩ
± 0.01 % 24 Ω to 100 kΩ
± 10 ppm/K
± 0.5 % 10 Ω to 1 MΩ
± 0.25 % 10 Ω to 1 MΩ
± 0.1 % 10 Ω to 1 MΩ
± 0.05 % 24 Ω to 100 kΩ
± 0.02 % 24 Ω to 100 kΩ
± 0.01 % 24 Ω to 100 kΩ
± 5 ppm/K
± 0.5 % 10 Ω to 1 MΩ
± 0.25 % 10 Ω to 1 MΩ
± 0.1 % 10 Ω to 1 MΩ
± 0.05 % 24 Ω to 100 kΩ
± 0.02 % 24 Ω to 100 kΩ
± 0.01 % 24 Ω to 100 kΩ
PACKAGING
MODEL REEL BOX
PIECES/REEL CODE PIECES/BOX CODE
MPR24 5000 RP 100
1000
CU
C1
••
– 0.5 %; – 0.25 %; – 0.1 %
– 0.05 %; – 0.02 %; – 0.01 %
C
100 150- 50 0 50 70
ϑ
Ambient Temperature amb
0
0.1
0.2
W
Power Dissipation
P
Derating - Depending on Resistance Tolerances
www.vishay.com For technical questions, contact: filmresistors.leaded@vishay.com Document Number: 28727
84 Revision: 10-Mar-08
MPR24
Vishay BCcomponents High Precision Leaded Resistors
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
following specifications:
EN 140000/IEC 60115-1, Generic specification (includes
tests)
EN 140100/IEC 60115-2, Sectional specification (includes
schedule for qualification approval)
CECC 40101-806, Detail specification (includes schedule for
conformance inspection)
Most of the components are approved in accordance with the
European CECC-system, where applicable. The following
table contains only the most important tests. For the full test
schedule refer to the documents listed above. The testing
also covers most of the requirements specified by
EIA/IS-703 and JIS-C-5202.
The tests are carried out in accordance with IEC 60 068 and
under standard atmospheric conditions in accordance with
IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category Temperature; damp heat, long term, 56 days) is
valid.
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
For testing the components are mounted on a test board in
accordance with IEC 60115-1, 4.31 unless otherwise
specified.
In the Test Procedures and Requirements table only the
tests and requirements are listed with reference to the
relevant clauses of IEC 60115-1 and IEC 60068-2; a short
description of the test procedure is also given.
TEST PROCEDURES AND REQUIREMENTS
IEC
60115-1
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
Stability for product
types: 24 Ω to 100 kΩ4.99 Ω to < 24 Ω;
> 100 kΩ to 1 MΩ
4.5
-resistance
(ΔR/R)-± 0.5 %; ± 0.25 %; ± 0.1 %;
± 0.05 %; ± 0.02 %; ± 0.01 % ± 0.5 %; ± 0.25 %; ± 0.1 %
4.8.4.2
-temperature
coefficient
at 20/70/20 °C ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K; ± 05 ppm/K
at 20/LCT/20 °C and
20/UCT/20 °C ± 25 ppm/K
4.25.1
-endurance at
70 °C
U= or
U = Umax.;
1.5 h ON;
0.5 h OFF
70 °C; 2000 h ± (0.05 % R + 0.01 Ω)
4.24
78 (Cab) damp heat,
steady state
(40 ± 2) °C; 56 days;
(93 ± 3) % RH ± (0.05 % R + 0.01 Ω)
4.23 climatic
sequence:
4.23.2 2 (Ba) dry heat 125 °C; 16 h
4.23.3
30 (Db) damp heat,
cyclic
55 °C; 24 h;
90 % to 100 % RH;
1 cycle
P70 x R
Document Number: 28727 For technical questions, contact: filmresistors.leaded@vishay.com www.vishay.com
Revision: 10-Mar-08 85
MPR24
High Precision Leaded Resistors Vishay BCcomponents
4.23.4 1 (Aa) cold - 55 °C; 2 h
4.23.5
13 (M) low air pressure 8.5kPa; 2h;
15 °C to 35 °C
4.23.6
30 (Db) damp heat,
cyclic
55 °C; 5 days;
95 % to 100 % RH;
5 cycles
± (0.05 % R + 0.01 Ω)
no visible damage
4.13
-short time
overload
Room temperature;
U= 2.5 x or
U = 2 x Umax.;
5 s
± (0.01 % R + 0.01 Ω)
no visible damage
4.19
14 (Na) rapid change of
temperature
30 min at LCT and
30 min at UCT; 5 cycles
± (0.01 % R + 0.01 Ω)
no visible damage
4.29
45 (XA)
component
solvent
resistance
Isopropyl alcohol
+ 23 °C; toothbrush
method
marking legible;
no visible damage
4.18.2
20 (Tb) resistance to
soldering heat
unmounted
components;
(260 ± 5) °C;
(10 ± 1) s
± (0.01 % R + 0.01 Ω)
no visible damage
4.17
20 (Ta) solderability + 235 °C; 2 s
solder bath method good tinning (≥ 95 % coverage);
4.22
6 (B4) vibration
6 h;
10 Hz to 2000 Hz
1.5 mm or 196 m/s2
± (0.01 % R + 0.01 Ω);
no visible damage
4.16 21 (Ua1)
21 (Ub)
21 (Uc)
robustness of
terminations
tensile, bending and
torsion
± (0.01 % R + 0.01 Ω);
no visible damage
4.7 - voltage proof URMS = Uins;
60 s no flashover or breakdown
4.12
- noise
IEC 60 195:
R ≤ 100 kΩmax. 0.25 µV/V
R > 100 kΩmax. 0.5 µV/V
TEST PROCEDURES AND REQUIREMENTS
IEC
60115-1
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
Stability for product
types: 24 Ω to 100 kΩ4.99 Ω to < 24 Ω;
> 100 kΩ to 1 MΩ
P70 x R
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
