VJ....W1BC Ultra Small Series 0201 Vishay Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES * High capacitance in unit size * High precision dimensional tolerances RoHS COMPLIANT * Suitably used in high-accuracy automatic mounting machine * Dry sheet manufacturing technology * Noble Metal Electrode system (NME) for C0G (NP0) * Base Metal Electrode system (BME) for X5R, X7R * Halogen-free according to IEC 61249-2-21 APPLICATIONS * Miniature microwave module * Portable equipment - Mobile phone, PDA * High frequency circuits ELECTRICAL SPECIFICATIONS Size 0201 Dielectric C0G (NP0) X7R X5R 0.5 pF to 100 pF 100 pF to 10 nF 100 pF to 0.10 F Cap. 5 pF: B ( 0.1 pF), C ( 0.25 pF) 5 pF < Cap. < 10 pF: C ( 0.25 pF), D ( 0.5 pF) Cap. 10 pF: F ( 1 %), G ( 2 %), J ( 5 %) K = ( 10 %) K ( 10 %) K ( 10 %) M ( 20 %) 16 V, 25 V 10 V, 16 V, 50 V 6.3 V, 10 V, 16 V, 50 V Cap. < 30 pF, Q 400 + 20 C Cap. 30 pF, Q 1000 10 V 5 % 16 V: 3.5 % 50 V: 3.0 % 6.3 V: 10 % 10 V: 5.0 % 16 V: 3.5 % 50 V: 3.0 % Capacitance Capacitance Tolerance (2) Rated Voltage (Vdc) tan /Q (1) 10 G Insulation Resistance at UR Operating Temperature 10 G or R x C 500 F, whichever is less - 55 C to + 125 C Capacitance Change - 55 % to + 85 C 30 ppm Termination 15 % Ni/Sn lead (Pb)-free termination Notes (1) Measured at 30 % ~ 70 % related humidity NP0: apply 1.0 Vrms 0.2 Vrms, 1.0 MHz 10 % at the conditions of 25 C ambient temperature X7R, X5R: apply 1.0 Vrms 0.2 Vrms, 1.0 kHz 10 % at the conditions of 25 C ambient temperature (2 )Preconditioning for X5R, X7R MLCC: Perform a heat treatment at 150 C 10 C for 1 h, then leave in ambient condition for 24 h 2 h before measurement. ORDERING INFORMATION VJ0201 A 100 J X X C W1BC SIZE CODE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION RATED VOLTAGE PACKAGING PROCESS CODE FOR BASIC COMMODITY C = 0.25 pF D = 0.5 pF J=5% K = 10 % M = 20 % X = Ni Barrier Y = 6.3 V Q = 10 V J = 16 V X = 25 V A = 50 V C = 7" reel/paper tape 0201 A = C0G (NP0) Two significant digits Y = X7R followed by the G = X5R number of zeros. R is in place of decimal point: 0R5 = 0.5 pF 1R0 = 1.0 pF 100 = 10 pF Document Number: 28538 Revision: 05-Aug-09 For technical questions, contact: mlcc@vishay.com www.vishay.com 1 VJ....W1BC Ultra Small Series 0201 Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications Vishay SELECTION CHART EIA SIZE 0201 DIELECTRIC NP0 EIA CAP. CODE CAP. 0R5 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 152 222 332 472 682 103 153 223 333 473 683 104 0.5 pF 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10 pF 12 pF 15 pF 18 pF 22 pF 27 pF 33 pF 39 pF 47 pF 56 pF 68 pF 82 pF 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1000 pF 1500 pF 2200 pF 3300 pF 4700 pF 6800 pF 0.010 F 0.015 F 0.022 F 0.033 F 0.047 F 0.068 F 0.10 F X7R 16 V 25 V L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L 10 V L L L L L L L X5R 16 V 50 V L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L 6.3 V 10 V L L L L L L 16 V L L L L L 50 V L L L L L L L L L L L L L L L L L L L Note * Letters indicate product thickness, see packaging quantities www.vishay.com 2 For technical questions, contact: mlcc@vishay.com Document Number: 28538 Revision: 05-Aug-09 VJ....W1BC Ultra Small Series 0201 Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications Vishay DIMENSIONS in inches [millimeters] SIZE CODE W T MB L W 0201 0.024 0.0012 0.012 0.0012 [0603] [0.60 0.03] [0.30 0.03] T MAX. MB 0.013 [0.33] 0.006 0.002 [0.15 0.05] MB L STORAGE AND HANDLING CONDITIONS (1) To store products at 5 C to 40 C ambient temperature and 20 % to 70 % related humdity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. Don't store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which easily be resulted in poor soldering. b. To store products on the shelf and avoid exposure to moisture. c. Don't expose products to excessive shock, vibration, direct sunlight and so on. PACKAGING QUANTITIES PAPER TAPE SIZE CODE (inch/mm) THICKNESS (mm) 7" reel (C) 13" reel (P) 0201 (0603) 0.30 0.03 15K - PAPER TAPE SPECIFICATIONS DIMENSIONS OF PAPER TAPE in millimeters P0 P2 D0 PRODUCT SIZE CODE SYM. E F W B0 A0 P1 REEL SPECIFICATIONS 0201 A0 0.37 0.03 B0 0.67 0.03 W 8.00 0.10 E 1.75 0.05 F 3.50 0.05 D0 1.55 0.05 P0 4.00 0.10 P1 2.00 0.05 P2 2.00 0.05 REEL DIMENSIONS AND TAPE WIDTH in millimeters D C A O 180 mm; 7" O 330 mm; 13" A 13.0 0.5 13.0 0.5 B 9.0 1.0 9.0 1.0 C 178.0 1.0 330.0 1.0 D 60.0 1.0 100.0 1.0 B Document Number: 28538 Revision: 05-Aug-09 For technical questions, contact: mlcc@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1