tics. Absolute Maximum Ratings* SEMIS ONL ES TIPS ng MMPQ6700 TA = 25C unless otherwise noted Quad NPN & PNP General Purpose Amplifier These complimentary devices can be used in switches with collector currents of 10 pA to 100 mA. These devices are best used when space is the primary consideration. Sourced from Process 23 & 66. See 2N3904 (NPN) & 2N3906 (PNP) for characteris- Symbol Parameter Value Units VcEo Collector-Emitter Voltage 40 Vv Vecso Collector-Base Voltage 40 Vv VeEBO Emitter-Base Voltage 5.0 Vv Ic Collector Current - Continuous 200 mA Ty, Tstg Operating and Storage Junction Temperature Range -55 to +150 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics TA = 25C unless otherwise noted Symbol Characteristic Max Units MMPQ6700 Pop Total Device Dissipation 1000 mw Derate above 25C 8.0 mWw/C Reva Thermal Resistance, Junction to Ambient Effective 4 Die 125 C/W Each Die 240 C/W OOZ9DdNW 1997 Fairchild Semiconductor CorporationElectrical Characteristics Quad NPN & PNP General Purpose Amplifier TA = 25C unless otherwise noted (continued) Symbol Parameter Test Conditions Min Max | Units OFF CHARACTERISTICS V(BR)CEO Collector-Emitter Breakdown lo =10 mA, Ip =0 40 Vv Voltage V(BR)CBO Collector-Base Breakdown Voltage lo = 10 DA, le = 0 40 Vv V(BR)EBO Emitter-Base Breakdown Voltage leE=10 A, Ic =0 5.0 Vv lcoBo Collector-Cutoff Current Vop = 30 V, lE=0 50 nA lEBo Emitter-Cutoff Current Vep=4.0 V, Ilo =0 50 nA ON CHARACTERISTICS* hee DC Current Gain Vce=1.0V,lc=0.1mA 30 Voce =1.0V, lo=1.0mA 50 VceE=1.0V, lc=10mA 70 Voe(eat) Collector-Emitter Saturation Voltage | Ic = 10 mA, Ip =1.0 mA 0.25 Vv VBE(at) Base-Emitter Saturation Voltage lc = 10 mA, Ip = 1.0 mA 0.90 Vv SMALL SIGNAL CHARACTERISTICS Cob Output Capacitance Vcp = 5.0 V, f = 100 kHz 45 pF Cid Input Capacitance Vee = 0.5 V, f= 1.0 kHz 10 pF fr Current-Gain Bandwidth Product lo = 10 MA, Voce = 20 V, 200 MHz f = 100 MHz *pulse Test: Pulse Width < 300 us, Duty Cycle < 2.0% OOZ9DdNWTRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx ISOPLANAR CoolFET MICROWIRE CROSSVOLT POP E?CMOS PowerTrench FACT qs FACT Quiet Series Quiet Series FAST SuperSOT-3 FASTr SuperSOT-6 GTo SuperSOT-8 HiSeC TinyLogic DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or This datasheet contains the design specifications for In Design product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.