SOSPHC400K HIGH FREQUENCY! SWITCHING en Parts are RoHS compliant APPLICATIONS: industrial controls, Motor speed controls, Resonant circuits, induction heaters, Electronic ballasts, Audio, SMPS ELECTRICAL SPECIFICATIONS Capacitance: 5 uF Tolerance: -10 % , +10 % Dissipation Factor: 0.0006 Max at 1000 Hz and 25C Temperature Range: -40C to +86C Temperature Coefficient: -200 PPM/C: -100 PPM/C, 100 PPMPC Above 85C the rated (DC/AC) voltage must be derated at per N/AC Ripple Current: 10 A at 100 kHz and 70C WVODC: 400 Volts DC ESR: 7.4 milliOhms (typical) at 100 kHz and 25C SVDC: 600 Volts DC Self Inductance: 1 Nanohenries maximum per mm of body length and lead length VAC: 250 Volts AC dvdt: 40 V/us Terminal to Terminal Dielectric strength: 2 times the rated DC voltage when Terminal to case Dielectric strength: 3000 VAC when applied between the applied between the terminals for 10 seconds terminals and case for 60 seconds Insulation Resistance (Terminal to Terminal): 30000 MINIMUM after 100 Volts Insulation resistance (Terminal to Case): N/A Megohms MINIMUM after 0 Volts DC is applied for 60 seconds at 20C DC is applied for 0 seconds at 0 Reliability: 300 failures/billion component hours Load Life: 100000/30000 hours at 70C with 100% of rated voltage Capacitance Change: <3% of initially measured value D.F. Change: <200% of maximum specified value LR. Change: =50% of minimum specified value PHYSICAL DIMENSIONS Diameter (D): 22.5 mm, MAX mm Lead Spacing (S): mm, +/- mm Length (L): 46 mm, MAX mm Lead Diameter (d): 1 mm, +/-0.05 mm Lead Finish: Matte Tin Lead Length (LL): 35mm, +/- MIN mm oT d z + KL iC - i D "i LL +_ L -+##_ LL -#&# a s 3757 W. Touhy Ave. Lincolnwood. IL 60712 (847) 675-1760 FAX (847) 673-2850 Illinois Capacitor (HK) Ltd.. Tel: 85227930931, Fax: 85227930731, www.illcap.com.hk ILLINOIS CAPACITOR Copyright 2019 Illinois Capacitor. An affiliate of Cornell Dubilier, All Rights Reserved