SPECIFICATION * Supplier : Samsung electro-mechanics * Part Number : CL10C120GB8NNNC * Product : Multi-layer Ceramic Capacitor * Description : CAP, 12, 50V, 2%, C0G, 0603 A. Samsung Part Number CL Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness 10 C 120 G B Samsung Multi-layer Ceramic Capacitor 0603 (inch code) L: 1.6 0.1 C0G 12 2 % 50 V 0.8 0.1 8 N N mm N W: Inner electrode Termination Plating Product mm Special Packaging C 0.8 0.1 mm Ni Cu Sn 100% (Pb Free) Normal Reserved for future use Cardboard Type, 7" reel B. Samsung Reliablility Test and Judgement condition Capacitance Performance Within specified tolerance 110% Test condition 0.5~5Vrms 640 min Q Insulation Resistance 10,000Mohm or 500Mohm Whichever is Smaller Rated Voltage Appearance Withstanding No abnormal exterior appearance No dielectric breakdown or Microscope (x10) 300% of the rated voltage Voltage Temperature Characterisitcs Adhesive Strength of Termination Bending Strength mechanical breakdown C0G terminal electrode Capacitance change : Solderability within 5% or 0.5 whichever is larger More than 95% of terminal surface (From -55 to 125, Capacitance change shoud be within 30PPM/) No peeling shall be occur on the 500gF, for 101 sec. is to be soldered newly Resistance to Soldering heat 60~120 sec. Capacitance change : within 2.5% or 0.25 whichever is larger Tan , IR : initial spec. Bending to the limit (1mm) with 1.0mm/sec. 1) Sn63Pb37 solder 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Solder pot : 2705, 101sec. Vibration Test Humidity Performance Capacitance change : within 2.5% or 0.25 whichever is larger Tan , IR : initial spec. Capacitance change : Test condition Amplitude : 1.5mm From 10Hz to 55Hz (return : 1min.) 2hours x 3 direction (x, y, z) 402, 90~95%RH, 500+12/-0hrs within 5% or 0.5 whichever is larger Q: 305 min IR : 1000Mohm or 50Mohm Whichever is Smaller Moisture Capacitance change : Resistance within 7.5% or 0.75 whichever is larger 402, 90~95%RH, 500+12/-0hrs Q: 140 min IR : 500Mohm or 25Mohm Whichever is Smaller Capacitance change : With 200% of the rated voltage High Temperature With rated voltage Resistance within 3% or 0.3 whichever is larger Q: 305 min IR : 1000Mohm or 50Mohm Whichever is Smaller Max. operating temperature 1000+48/-0hrs Temperature Capacitance change : 1 cycle condition Cycling 25 within 2.5% or 0.25 whichever is larger Min. operating temperatur Tan , IR : initial spec. Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 250+/-5, 6sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.