NEW PRODUCT Wire to Board Connector LBTCONNECTOR ATYPE 3circuits Power supply 3.45mmPitch 5circuits Power supply 5.45mmPitch 7circuits Power supply 7.45mmPitch 9circuits Power supply 9.45mmPitch Signal 1.0mmPitch In order to connect to the lithium polymer battery and DC IN, the contacts for signal and the contacts for power supply are clearly separated and the contact for power supply connects to the counterpart earlier than the contact for signal. Due to the structure to radiate heat, the low profile (space saving type) connector to which the high current can be applied is realized. Features Low profile (Small size) Height:3.0mmxLength(When mating):9.9mm Width:3circuits 09.1mm Width:5circuits 11.1mm Width:7circuits 13.1mm Width:9circuits 15.1mm Hybrid 3circuits:2-ways of power supply (both sides) and 1-way of signal (center). 5circuits:2-ways of power supply (both sides) and 3-way of signal (center). 7circuits:2-ways of power supply (both sides) and 5-way of signal (center). 9circuits:2-ways of power supply (both sides) and 7-way of signal (center). Structure to radiate heat (Patent pending) The structure to radiate heat is designed for header contact in order to decrease the heat filled inside connector. Sequence It is designed that the contacts for power supply (both sides) connect to the counterpart earlier than the contact for signal. High strength Dipping type reinforcement tabs are installed, and the strength of fixing toPCB strengthened. (Contacts for power supply and signal are SMT type.) Prevention of insufficient mating In order to avoid the insufficient mating, rib on socket housing was designed JAN.29.2015 VER.4 General Specifications Temperature range 25+85 (Including the temperature rise in applying electrical current) Current rating Power supply 5.0A (When using AWG#24) Power supply 6.0A (When using AWG#22) Power supply 7.0A (When using AWG#20) Signal 0.5A (When using AWG#28) Voltage rating 50V Applicable wire Power supply Wire range: AWG#24AWG#20 Power supply Insulation O.D.: 1.111.44 Signal Wire range: AWG#28 Insulation O.D.: 0.600.80 Circuit No. Mass 3circuits5circuits 7circuits9circuits Part No. BaseSM(*)B-LBTAKS-TD-N2T-K(HF) Socket HousingLBTAR-(*)V-2K-K(HF) Socket contact for power supplySLBTAD-01T-M0.5 Socket contact for signalSSH-003T-P0.2-H Note:Number of circuits is indicated in (*) Example 3circuitsSM03B-LBTAKS-TD-N2T-K(HF) LBTAR-03V-2K-K(HF) 9circuitsSM09B-LBTAKS-TD-N2T-K(HF) LBTAR-09V-2K-K(HF)