MPSA63 / MMBTA63 / PZTA63 PNP Darlington Transistor Features * This device is designed for applications requiring extremely high current gain at currents to 800 mA. * Sourced from Process 61. MMBTA63 MPSA63 PZTA63 C C E E TO-92 SOT-23 SOT-223 B Mark:2U EBC C B Absolute Maximum Ratings * Ta = 25C unless otherwise noted Symbol Parameter Value Units VCES Collector-Emitter Voltage -30 V VCBO Collector-Base Voltage -30 V VEBO Emitter-Base Voltage -10 V Collector Current - Continuous -1.2 A - 55 to +150 C IC TJ, Tstg Operating and Storage Junction Temperature Range * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol Ta = 25C unless otherwise noted Max. Parameter MPSA63 *MMBTA63 **PZTA63 Total Device Dissipation Derate above 25C 625 5.0 350 2.8 1,000 8.0 RJC Thermal Resistance, Junction to Case 83.3 RJA Thermal Resistance, Junction to Ambient 200 357 125 PD Units mW mW/C C/W C/W * Device mounted on FR-4 PCB 1.6" x 1.6" x 0.06". ** Device mounted on FR-4 PCB 36mm x 18mm x 1.5mm; mounting pad for the collector lead min. 6cm2. (c) 2010 Fairchild Semiconductor Corporation MPSA63 / MMBTA63 / PZTA63 Rev. A1 www.fairchildsemi.com 1 MPSA63 / MMBTA63 / PZTA63 -- PNP Darlington Transistor August 2010 Symbol Ta = 25C unless otherwise noted Parameter Test Condition Min. Max. Units Off Characteristics ICBO Collector-Emitter Breakdown Voltage IC = -100A, IB = 0 Collector-Cutoff Current VCB = -30V, IE = 0 IEBO Emitter-Cutoff Current BV(BR)CES -30 VEB = -10V, IC = 0 V -100 nA -100 nA On Characteristics * 5,000 10,000 DC Current Gain IC = -10mA, VCE = -5.0V IC = -100mA, VCE = -5.0V VCE(sat) Collector-Emitter Saturation Voltage IC = -100mA, IB = -0.1mA -1.5 V VBE(on) Base-Emitter On Voltage IC = -100mA, VCE = -5.0V -2.0 V hFE Small Signal Characteristics Current Gain - Bandwidth Product fT IC = -10mA, VCE = -5.0V, f = 100MHz 125 MHz * Pulse Test: Pulse Width 300s, Duty Cycle 2.0% Typical Pulsed Current Gain vs Collector Current VCESAT - COLLECTOR EM ITTE R VOLTAGE (V) h FE- TYPICAL PULSED CURRENT GAIN (K) Typical Performance Characteristics 50 VCE = 5V 40 30 125 C 20 25 C 10 - 40 C 0 0.01 0.1 I C - COLLECTOR CURRENT (A) 1 Figure 1. Typical Pulsed Current Gain vs Collector Current 1.6 = 1000 1.2 - 40 C 0.8 25 C 125 C 0.4 0 0.001 0.01 0.1 I C - COLLECTOR CURRENT (A) 1 Figure 2. Collector-Emitter Saturation Voltage vs Collector Current (c) 2010 Fairchild Semiconductor Corporation MPSA63 / MMBTA63 / PZTA63 Rev. A1 Collector-Emitter Saturation Voltage vs Collector Current www.fairchildsemi.com 2 MPSA63 / MMBTA63 / PZTA63 -- PNP Darlington Transistor Electrical Characteristics 2 V BE( ON)- BASE EMITTER ON VOLTAGE (V) VBESAT - BASE EMITTE R VOLTAGE (V) Base-Emitter Saturation Voltage vs Collector Current = 1000 - 40 C 1.6 1.2 25 C 125 C 0.8 0.4 0 0.001 0.01 0.1 I C - COLLECTOR CURRENT (A) 1 Base Emitter ON Voltage vs Collector Current 2 - 40 C 1.6 1.2 25 C 125 C 0.8 V CE = 5V 0.4 0 0.001 Figure 3. Base-Emitter Saturation Voltage vs Collector Current 1 Figure 4. Base-Emitter On Voltage vs Collector Current Collector-Cutoff Current vs Ambient Temperature Input and Output Capacitance vs Reverse Bias Voltage 100 16 f = 1.0 MHz V CB = 15V CAPACITANCE (pF) I CBO - COLLE CTOR CURRENT (nA) 0.01 0.1 I C - COLLECTOR CURRENT (A) 10 1 0.1 12 8 C ib 4 C ob 0.01 25 50 75 100 T A - AMBIE NT TEMP ERATURE ( C) 0 0.1 125 1 10 REVERSE VOLTAGE (V) 100 Figure 6. Input and Output Capacitance vs Reverse Bias Voltage Figure 5. Collector Cutoff Current vs Ambient Temperature Power Dissipation vs Ambient Temperature P D - POWER DISSIPATION (W) 1 SOT-223 0.75 TO-92 0.5 SOT-23 0.25 0 0 25 50 75 100 TEMPERATURE ( o C) 125 150 Figure 7. Power Dissipation vs Ambient Temperature (c) 2010 Fairchild Semiconductor Corporation MPSA63 / MMBTA63 / PZTA63 Rev. A1 www.fairchildsemi.com 3 MPSA63 / MMBTA63 / PZTA63 -- PNP Darlington Transistor Typical Performance Characteristics (continued) TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS FRFET(R) SM Global Power Resource Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax Motion-SPM OptoHiTTM OPTOLOGIC(R) (R) OPTOPLANAR AccuPower Auto-SPM Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) Fairchild(R) (R) Fairchild Semiconductor FACT Quiet Series FACT(R) FAST(R) FastvCore FETBench FlashWriter(R)* FPS (R) PDP SPMTM Power-SPM PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START SPM(R) STEALTH SuperFET SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM (R) * (R) The Power Franchise TinyBoost TinyBuck TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TriFault Detect TRUECURRENT* PSerDes UHC(R) Ultra FRFET UniFET VCX VisualMax XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I49 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com