H7CN-XLN-AC100 240 - OMRON INDUSTRIAL AUTOMATION

Input signal type Contact and solid-state inputs for count and reset

Operating mode UP DOWN UP DOWN Reversible counting

counting counting counting counting Command Individual

input input

Backup power for Not provided Provided Not provided

memory protection

Output type SPST-NO SPDT SPST-NO

Max. 30 cps H7CN-XLN H7CN-YLN H7CN-XLNM H7CN-YLNM H7CN-ALN H7CN-BLN

counting 5 kcps*H7CN-XHN H7CN-YHN H7CN-XHNM H7CN-YHNM H7CN-AHN H7CN-BHN

speed

Supply AC 100 to 240 VAC, 50/60 Hz

voltages DC 12 to 48 VDC, 20% max. ripple

Input signal type Contact and solid-state inputs for count and reset

Operating mode UP counting DOWN counting

Backup power for memory protection Not provided

Output type Open collector transistor

Max. counting speed 5 kcps

Part number H7CN-XHNS H7CN-YHNS

Supply AC 100 to 240 VAC, 50/60 Hz

voltages DC 12 to 48 VDC, 20% max. ripple

Digital Counter H7CN

1/16 DIN, Single Preset Counter

with Four-Digit LED Display

■Choose from UP, DOWN and

reversible counting

■Count speed up to 5 K counts

per second

■Wide-range AC or DC supply voltages

■Contact and solid-state output models

available

■Memory protection circuit available on

AC models

■Easy-to-read 8 mm-high LED display

■Panel-mounting adapter, sockets, and

accessories available separately

Ordering Information

■ COUNTERS

Add the supply voltage type to the part number when you order. For example, H7CN-XHNM-AC.

Contact Output Types

Solid-State Output Types

Memory protection is not available on contact output models with DC supply voltages.

Max.

counting

speed

Supply

voltages

Supply

voltages

*Only the solid-state input signal is available when the maximum counting speed is 5 kcps.

H7CN H7CN

■ ACCESSORIES

Description Part number

Sockets 11-pin Bottom surface or track mounting, top screw terminals P2CF-11

Bottom surface or track mounting, top screw terminals, finger safe terminal P2CF-11-E

conforms to VDE0106/P100

Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals P3GA-11

8-pin Bottom surface or track mounting, top screw terminals P2CF-08

Bottom surface or track mounting, top screw terminals, finger safe terminal P2CF-08-E

conforms to VDE0106/P100

Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals P3G-08

Terminal cover for P3G sockets, conforms to VDE0106/P100 Y92A-48G

Panel mounting Fits behind panel, ideal for side-by-side installation. Use P3G❑-❑❑ sockets Y92F-30

adapter

Battery for Use with H7CN-❑❑❑M counters Y92S-20

memory backup

Protective cover Hard plastic cover protects against dust, dirt, and water; not for use with panel covers Y92A-48B

Soft plastic cover protects against dust, dirt, and oil; not for use with panel covers Y92A-48D

NEMA 4 cover Waterproof front cover Y92A-48N

Mounting track DIN rail, 50 cm (1.64 ft) length; 7.3 mm thick PFP-50N

DIN rail, 1 m (3.28 ft) length; 7.3 mm thick PFP-100N

DIN rail, 1 m (3.28 ft) length; 16 mm thick PFP-100N2

End plate PFP-M

Spacer PFP-S

Specifications

■ GENERAL CAPABILITIES

Model H7CN-❑❑N H7CN-❑❑NS

Classification Single preset counter

Mounting Panel, track or surface

External connections 8-pin round sockets or 11-pin round sockets (-M types)

Output modes Sustained output until reset

Input modes UP (H7CN-X), DOWN (H7CN-Y), reversible with command UP (H7CN-X), DOWN (H7CN-Y)

input (H7CN-A), reversible with individual input (H7CN-B)

Reset system Power-OFF: 0.5 sec reset time (except H7CN-M types)

Reset time following power application: 0.05 sec

External reset and manual: 0.02 second reset time

Reset time following signal application: 0.05 sec

Sensor power supply Not provided

Input signal Count and reset

Input method Contact Solid-state input

Impedance by short-circuiting contacts: 1 kΩ max. Residual voltage: 0.5 V max. (1 V actual)

Impedance by opening contacts: 100 kΩ min.

Control outputs SPST-NO, 3 A, 250 VAC Open collector transistor,

SPDT, 3 A, 250 VAC for H7CN-M counters 100 mA, 30 VDC max.

Displays 7-segment LED count value display, 8 mm (0.3 in) high characters,

and LED indicators for count up and reset

Digits 4 digits

Memory backup H7CN-M models have a memory protection circuit that

protects against momentary power failures lasting up

to 10 minutes. An optional Y92S-20 lithium 3 V battery

can provide up to 5 years of memory retention.

H7CN

■ RATINGS

Supply voltage AC 100 to 240 VAC, 50/60 Hz

DC 12 to 48 VDC (20% max. ripple)

Operating voltage range 85 to 110% of rated voltage

Power consumption Approx. 12 VA/2.5 W at 240 VAC, 50 Hz

Approx. 2.5 W at 48 VDC

Max. counting speeds (CP1, CP2) 30 cps with contact and solid-state inputs; 5,000 cps with solid-state inputs only

Minimum pulse widths 16.7 ms at 30 cps (ON/OFF ratio of 1:1)

0.1 ms at 5 kcps (ON/OFF ratio of 1:1)

Approvals UL / CSA

■ CHARACTERISTICS

Engineering Data

■ ELECTRICAL SERVICE LIFE

Note:

The service life graphs apply

to all relay output models.

They do not apply to solid-

state output models H7CN-

XHNS or H7CN-YHNS.

Ambient operating temperature -10° to 55°C (14° to 131°F)

Storage temperature -25° to 65°C (-13° to 149°F)

Ambient operating humidity 35 to 85% RH

Insulation resistance 100 mΩ minimum at 500 VDC

Dielectric strength 2,000 VAC, 50/60 Hz for 1 minute between current-carrying terminal and exposed

metal parts, between power supply circuit and control output circuit

Vibration Mechanical durability 10 to 55 Hz, 0.75 mm (0.03 in) double amplitude

Malfunction durability 10 to 55Hz, 0.5 mm (0.02 in) double amplitude

Shock Mechanical durability Approx. 30 G

Malfunction durability Approx. 10 G

Service Mechanical 10 million operations minimum under no load at 1,800 operations/hour switching frequency

life Electrical 100,000 operations minimum under resistive load at 3 A, 250 VAC (p.f. = 1)

Weight 150 g (5.3 oz.)

30 VDC (L/R = 7 ms)

250 VAC (p.f. = 0.4)

30 VDC (p.f. = 1)

250 VAC (p.f. = 1)

Load current (A) Load current (A)

Switching operations (x10

)

Switching operations (x10

)

1000

500

100

00 1 2 3

1000

500

100

00 1 2 3

Service

life

H7CN H7CN

Timing Charts

■ INPUT MODE

Up/Down Selectable Type

Note: (A) must be more than the minimum signal width. If (A) is set shorter than the minimum signal width, the error of count ±1 may occur.

Up mode Down mode

Count input 1: Count input; Count input 2: Inhibit (gate) input Count input 1: Count input; Count input 2: Inhibit (gate) input

Count

input 1

Count

input 2

Count

value

Note: Input to the CP2 while the CP1 is set to "L."

Count

input 1

Count

input 2

Count

value

Note: Input to the CP2 while the CP1 is set to "L."

Count input 1: Inhibit (gate) input; Count input 2: Count input Count input 1: Inhibit (gate) input; Count input 2: Count input

Count

input 1

Count

input 2

Count

value

Note: Input to the CP2 while the CP1 is set to "L."

Count

input 1

Count

input 2

Count

value

Note: Input to the CP2 while the CP1 is set to "L."

Up/Down Type

Note: (A) must be more than the minimum signal width. If (A) is set shorter than the minimum signal width, the error of count ±1 may occur.

Up/Down A command input

Count

input 1

Count

input 2

Count

value

H: Short-circuit ON-time impedance; 1 kΩ max. Residual voltage; 0.5 V max.

L: Open-circuit OFF-time impedance; 100 kΩ min.

Up/Down B individual input

Count

input 1

Count

input 2

Count

value

Inhibited Inhibited

Inhibited

H7CN

■ OUTPUT OPERATION

Reversible Counters

UP Counters DOWN Counters

Dimensions

Unit: mm (inch)

■ COUNTERS Panel cutout

Note: Recommended panel

thickness is 1 to 3.2 mm.

Panel cutout conforms to

DIN 43700.

(1.97)

(1.77)

(1.97)

(1.89)

45 (1.77)

13.5

(0.53)

10.7

(0.42) 86 (3.39)

(0.24) 0.7

(0.03)

(1.89)

44.8

(1.76)

H7CN H7CN

P2CF-08 Track Mounting/Front Connecting Socket

Two 4.5 dia.

holes

7.8

(0.31)

50 max.

(1.97)

Eight

M3.5 x 7.5 sems 3

(0.12) 4.5

(0.18)

20.3 max.

(0.80)

Two, 4.5 dia. or two

M4 socket mounting holes

Surface Mounting

Holes

(0.16)

Terminal Arrangement/

Internal Connections

(Top View)

40 ± 0.2

(1.57)

70 max.

(2.76)

35.4

(1.39)

P2CF-08E Finger Safe Terminal Type

Conforming to VDE0106/P100

Eight

M3.5 x 7.5 sems 7.8

(0.31)

70 max.

(2.76) Two 4.5 dia.

holes

50 max.

(1.97)

40±0.2

4.5

(0.18)

35.4

(1.39)

21.5 max

20.3

1.3

■ ACCESSORIES

P2CF-11 Track Mounting/Front Connecting Socket

P3G-08 Back Connecting Socket

27 dia

(1.06)

(1.77)

4.9

(0.19) 17

(0.67)

Terminal Arrangement

70 max.

(2.76)

Eleven

M3.5 x 7.5 sems 7.8

(0.31)

Two 4.5 dia.

holes

(0.16)

(0.12) 4.5

(0.18)

35.4

(1.39)

31.2 max.

(1.23)

Two, 4.5 dia. or two

M4 socket mounting holes

Surface Mounting Holes

40 ± 0.2

(1.57)

50 max.

(1.97)

H7CN

P3GA-11 Back Mounting Socket

Terminal arrangement

16.3

(0.64)

(1.01)

27 dia

(1.06)

Y92A-48G Finger Safe Terminal for P3G(A)

Conforming to VDE0106/P100 Twelve, 6.4 dia. holes

34 47.7

x 4.47 48 x 48

16.5

47.4

27.6

Eight

M3.5 x 7.5 sems

P2CF-11-E Finger Safe Terminal Type

Conforming to VDE0106/P100

7.8

(0.31)

70 max.

(2.76)

1.2

4.5

(0.18)

35.4

(1.39)

Two 4.5 dia.

holes

50 max.

(1.97)

40±0.2 30

31.2 max

Y92F-30 Panel Mounting Adapter

Adapter installs behind the panel. It is ideal for side by side installation. Use P3GA-11 or P3G-08 sockets.

Note: Recommended

panel thickness

is 1 to 3.2 mm.

Panel cutout

(2.28)

Panel Mounting

adapter P3G❑-❑❑

socket

(1.89) 11

(0.43)

96 (3.78)

H7CN H7CN

4.5 dia. hole

(+)

31.0

( – )

Lead wire with spade lug

120 mm (4.72 in) length

Y92S-20 Battery

Use this battery with H7CN-❑M counters

with memory protection circuit. While the

counter's built-in memory protection circuit

can retain values for power failures lasting

up to 10 minutes, the optional battery

protects memory in case of a longer

power outage. We recommend using the

battery as a safeguard. Memory values

can be retained for up to 5 years.

■ PROTECTIVE COVERS

Y92A-48B Hard Plastic Cover Y92A-48D Soft Plastic Cover

50.5

(1.99)

50.5

(1.99) 16 (0.63)

overall

depth

Hard plastic cover Y92A-48B and soft

plastic cover Y92A-48D snap onto the

front of the counter to protect against dirt

and water. The Y92A-48B hard plastic

cover prevents accidental resetting.

Y92A-48D soft plastic cover fits snugly

over the front and allows settings to be

changed. These covers are intended for

use in areas where unusual service

conditions do not exist.

■ BATTERY FOR MEMORY BACK-UP

PFP-M End Plate PFP-S Spacer

(1.97)

11.5

(0.45)

M4 x 8

pan head

screw

1.8

135.5 35.3

(1.39)

(0.39)

6.2

(0.24) 1.8

(0.07)

(0.20)

(0.63)

34.8

(1.37)

(1.74)

(10.39) 4.8 (0.19)

1.3 (0.05)

16.5

(0.65)

PFP-100N, PFP-50N Mounting Track PFP-100N2 Mounting Track

4.5

(0.18) 7.3±0.15

35±0.3 27±0.15

(0.04)

15 25 10 25 25 25

4.5

(0.18)

15 25 10 25 L25 25 15

35±0.3

(0.04)

(0.63)

29.2

(1.15)

1.5

(0.06)

27 24

1 m PFP-100N

50 cm PFP-50N

1 m PFP-100N2

L: Length

H7CN

Connections

Input terminal number Power supply terminal numbers Output terminals Memory

COM Reset CP1 CP2 AC (common), DC– AC (hot), DC+ COM NC NO DC- DC+

H7CN-❑❑N1345 2 7 8–6––

H7CN-❑❑❑S1 34 5 2 7 8–6 ––

H7CN-❑❑❑M 3 7 6 5 2 10 11 8 9 1 4

CP1

CP2

CP1

H7CN-❑❑N Counter H7CN-❑❑❑S Counter H7CN-❑❑❑M Counter

CP2

CP1

Operation

■ SETTING THE COUNT PRESET

Use the four pushwheel switches on the

front panel to set the desired count. Firmly

push the switches to avoid having two

numbers appear in the display window.

This causes the operating time to drift

widely.

Do not change the setting while the

counter is powered up. It may cause a

momentary output to occur.

WARNING

Do not set all four digits to

zero. This causes a momentary

output to occur that may lead to

accidental injury or damage.

Undesirable settings

530 counts?

2530 counts?

3530 counts?

H7CN H7CN

Mounting

■ PANEL MOUNTING

Using Y92F-30 Adapter

Insert the counter through the panel

cutout. Push the Y92F-30 adapter from

the rear of the counter as far forward

toward the panel as possible. Push the

P3G❑-❑❑ socket onto the rear of the

counter. Then wire the socket. Tighten the

two retaining screws. To release the

adapter, lift the tab at the rear of the

adapter.

Mounting

The P2CF-❑❑ socket has two hooks that

secure the counter to the socket. Be sure

to allow at least 20 mm (0.79 in) clear-

ance above and below the socket to gain

access and to release the hooks for

servicing and maintenance. Insert counter

into the socket. Latch hooks. Then clip

rear of the socket to the track. Push the

bottom onto the track until the latch hooks

securely.

P2CF-❑❑ Socket

Removal

Pull the latch on the socket with a flat-

blade screwdriver and remove the counter

and socket as one unit.

Several counters may be panel mounted

close together using a Y92F-30 adapter

as shown here. When mounting two or

more counters in a vertical line, arrange

the adapters so that their molded tabs are

positioned on the right and left sides.

When mounting two or more counters in a

horizontal line, arrange the adapters so

that their molded tabs are positioned on

the top and bottom sides.

Molded

tab

Panel cutout for side-by-side

mounting of two counters

Molded

tab

OMRON ELECTRONICS LLC OMRON CANADA, INC.

One East Commerce Drive 885 Milner Avenue

Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8

1-800-55-OMRON 416-286-6465

Cat. No. GC TMCN1 3/02 Specifications subject to change without notice. Printed in the U.S.A.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.omron.com/oei

Canada - http://www.omron.com/oci

NOTE: DIMENSIONS ARE SHOWN IN MILLIMETERS. To convert millimeters to inches divide by 25.4.